Lifespan = 50,000 hrs
Types of Output: 5
General Mode
- High (81 lumens, 1hr 43min)
- Mid (36 lumens, 6 hrs 14min)
- Low (3 lumens, 53 hrs)
Flashing Mode
- SOS (36 lumens)
- Strobe (135 lumens)
- Digitally regulated output - maintains constant brightness
- Reverse polarity protection, to protect from improper battery installation
- Pushbutton switch
- Made of high-quality plastic and aluminum alloy
- Aluminum alloy has the premium type III hard-anodized anti-abrasive finish
- Tough ultra-clear double glass lens w/ anti-reflective coating
- Impact resistance: 1.5m
- Max beam length: 87m
- Accessories included: clip, diffuser lens, lanyard
- Flashlight Operation
- Flashlight on/off
- Depress the pushbutton switch on the top to turn on/off the lightGeneral mode
- In the general mode, depress and hold the switch (for over 0.7 second), the light will change the brightness levels and will memorize automatically within 1 second working time. The brightness levels are in the order of High -> Low -> Mid -> Cycle
Flashing mode
In the flashing mode, depress and hold the switch (for over 0.7 second), the light will change between different flashing functions and memorize automatically. Various flashing functions are in the order of Strobe -> SOS -> Cycle
Mode selection
The default mode is the general mode. Depress the switch twice rapidly can select between the general mode and the flashing mode.
Protective mode
Unscrew the tail cap for half a turn to cut off the power completely so as to avoid the light turning on carelessly.
*Notice: The above-mentioned parameters (tested by 2500mAh Ni-MH battery in Lab) are approximate and may vary between flashlights, batteries, and environments.
