 |
 |
 |
|
- Model Number JDP-17DX
- Brand Jet
- Height 65.13 inch
- Width 12.8 inch
- Length 23.5 inch
- Net Weight 209 pound
- Gross Weight 253 pound
- Swing 16½ "
- Spindle Travel 4 3/8 "
- Spindle Distance to Table (max) 29 1/8 "
- Spindle Distance to Base 49 "
- Spindle Speed 200 - 3620 RPM
- Spindle Taper MT-2
- Drilling Capacity 5/8 "
- Chuck Size 5/8 "
- Column Diameter 3 1/8 "
- Table Size 14 x 18 "
- Table Tilt +/- 180 °
- Table Size Fully Extended (L x W) n.a.
- Base Size 11 1/8 x 19 5/8 "
- Fence Size (L x H) n.a.
- Motor Power ¾ HP
- Motor Voltage 115 V
- Prewired Voltage 115 V
- Motor Current 9 A
- Motor Phase 1 Ph
- Spindle Speeds 16
 | WARRANTY AND SERVICE
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. |
|
|
|
 |
|
 |
|
Features
The new JET model JDP-17DX - 17” Drill Press was designed especially for the woodworker. Head mounted dual AC powered laser guide system provides an accurate drilling cross point on the workpiece. The poly v-belt drive system is quiet and vibration free. This drill press also features a built-in work light to provide direct lighting on the workpiece. An extra large 14" x 18" work table provides plenty of support for larger projects.- Spindle mounted dual laser guide system provides a consistent drilling crosspoint on workpiece
- Innovative extra large 14" x 18" work table features twin T-slot grooves for miter gauge or homemade jigs, table has lip designed edge for easy clamping of workpiece and a removable insert
- Hinged metal belt and pulley cover provides easy access to the quick adjustment motor mount to allow rapid spindle speed changes
- Drill press head has integrated AC worklight
- Spindle has high-quality ball bearing construction for long life
- Adjustable tension spindle return spring is ideal for repetitive drilling of the same depth
- Powered by a heavy-duty 3/4HP, 1Ph, 115V TEFC motor and poly-v belt drive system
- Clutch-type drill stop regulates drilling depth
- Drill press is designed for left or right hand operators, handles can be placed on either side
|
|
|
|
|
|
|
|
|
