The Mafell MT 55 cc track saw produces beautiful, ultra-straight cuts that you would normally only get from a high-end table saw but in a compact, portable format. The Mafell guide track gives the MT 55 cc perfect guidance as you're making your cut, to ensure perfectly accurate and straight results. The splinter strip along the length of the guide track prevents tear-out, chipping and splintering for clean, crisp results even in melamine or veneers. An exceptional quality-of-cut eliminates or significantly reduces the need for sanding or other surface preparation after the cut, speeding production time.
A highly accurate bevel gauge can be set between -1 and 48 degree with positive stops at 0 and 45 degrees. The maximum depth of cut is 2-1/4" (57mm) at zero degrees or 1-19/32" at 45 degrees. A variable speed adjustment can reduce the motor speed for cutting certain materials, such as plastics to prevent melting.
The Mafell MT 55 cc track saw is compatible with Festool and similar guide tracks, as well as Mafell guide tracks which are available in various lengths up to just over 5-feet in length. Guide tracks can be easily and accurately combined to extend their length as needed using the track connector (204363). The saw features a depth gauge that can indicate the depth-of-cut either on or off of the guide track.
The fully enclosed blade housing on the Mafell MT 55 cc track saw assists with dust collection. Other track saws have an opening on the blade housing which can allow additional dust to escape. The Mafell uses a unique opening mechanism that allows access to the blade and arbor when you need to change blades. When the housing is in the open position, the arbor is automatically locked and the power trigger is locked for safety. An internal dust channel in the blade housing helps direct dust and chips to the dust port on the back of the saw. The dust port can be rotated 360-degrees with positive stops to keep your dust extraction hose out of the way during your cut.
A scoring feature allows you to quickly and easily make a quick scoring pass at the flip of a switch. This overrides the depth gauge setting and only allows the blade to slightly score the top of your cut surface. Flip the switch back to return to the depth of cut you've set on the depth gauge.
The optional parallel edge guide can be attached to the saw to guide the saw at an offset from the material's edge. The optional plunge cut template guide is used to assist with blade positioning when making an inset cut by plunging the blade into the middle of the material.
All Mafell power tools are covered by a comprehensive one-year manufacturer's warranty.
- (1) F160 guide track, 63-1/2"
- (1) 48-tooth 162mm carbide universal ATB blade
- (1) Arbor 5 mm allen key
- (1) Power cable 13.1 ft (4 meters)
- (1) T-MAX (T-LOC) Systainer