Makita HR4510C 1-3/4" AVT1/2 Rotary Hammer; Accepts SDS-MAX Bits

• Powerful 13.5 AMP motor; 1,250-2,750 BPM to handle the most demanding jobs
• Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• Variable speed control dial enables user to match the speed to the application for greater versatility
• L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• L.E.D. power lights indicate switch failure or cord damage
• 2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Extended life brushes are longer for more work between service intervals and less downtime
• 16 bit angle settings allow the bit to be set at different positions for operating convenience
• Automatic brush cut-off protects commutator from damage for longer tool life
• Lock-on slide switch for continuous operation ("Hammering Only" mode)
• One-touch sliding chuck for quick bit changes
• Rubberized ergonomic soft grip provides more comfort and control
• Accepts SDS-MAX bits

Includes

• Side Handle (151769-0)
• D-Handle (417003-1)
• Depth Gauge (321248-4)
• Bit Grease (194683-7)
• Tool Case