Kit Includes

• Festool 577506 CTC MIDI I Cordless 36V Mobile HEPA Dust Extractor PLUS 5.2Ah Kit
• Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack
• Festool 204309 Longlife Filter Bag for CT 15 / CT MINI I / CT MIDI I
• Festool 204201 HEPA Filter for CT 15 / MINI I / MIDI I
• Festool 577257 Standard Cleaning Set w/ Systainer3 M 137
• Festool 204083 CT Cyclone Dust Collection Pre-Separator CT-VA 20

Festool 577506 CTC MIDI I Cordless 36V Mobile HEPA Dust Extractor PLUS 5.2Ah Kit

• HEPA Filtration helps to ensure compliance with best practices as directed by OSHA and the EPA (please check your local
  jurisdiction for compliance)
• Powerful: Thanks to the 36 V turbine, power comparable to a corded extractor
• Hassle-free work: Work continuously with four battery packs and a TCL 6 DUO Rapid Charger in most cordless applications
• Practical: The extractor switches on via the remote control or the Bluetooth battery pack
• Mobile: Easy to transport at 30 lbs. (14.0 kg) or less (depending on battery selection) and the compact footprint
• Manual filter cleaning: For recovery of the suction force and maximum efficiency of the filter bag
• Virtually dust-free cordless applications: Perfectly designed for use with Festool cordless tools whether sawing, sanding or drilling
• Adjustable: Three levels of extraction power
• Independent: Complete cordless freedom with 2 x 18 V (4.0/5.2 Ah) battery packs

Enjoy the freedom and convenience of cordless dust extraction. The new CTC MIDI is our largest and most powerful cordless dust extractor yet featuring a 36-volt turbine (18V x 2) with up to 109 CFM (3100 l/min) and 76 (19000 Pa) of static water lift. Easily integrated with other cordless tools with the dependable and proven automatic start via a Bluetooth equipped battery or the supplied remote control. Fully equipped with timesaving and performanceenhancing features such as push-button suction control, manual filter cleaning, exterior-accessible filter drawer, smooth hassle-free hose, robust connection sleeve for secure leak-free connections, parking brake, and Systainer integration for easier transport. A HEPA filter comes standard and offers the ultimate in clean air and filtration.

Includes:

• (1) TCL 6 DUO Charger
• (2) 18V 5.2Ah Batteries
• (1) Battery and Charger Storage Systainer
• (1) HEPA Filter
• (1) SELFCLEAN filter bag SC-FIS-CT MINI/MIDI-2
• (1) Smooth suction hose dia. 27/32 x 3.5 m AS/CTR
• (1) Hose holder
• (1) SYS-Dock with T-LOC function
• (1) CT-F I Bluetooth extractor remote control

Powerful
Comparable power to the corded version thanks to the 36 V turbine with 2 x 18 V battery packs (4.0/5.2 Ah). This makes it ideal for sawing, sanding or drilling.

Practical remote control
Switching on the extractor via the remote control directly on the suction hose saves you a trip to the extractor. Ideal for occasional cleaning tasks.

Integrated Bluetooth
Ideal combination with Festool cordless tools. Convenient and fast: The extractor switches on automatically via the Bluetooth battery pack.

Suction power control
Adjustable suction power in three levels. The appropriate level can be selected depending on the application, which maximizes the battery runtime.

Working without interruption
With four battery packs and the TCL 6 DUO rapid charger (available 2023), work can be done in most cordless applications without
interruptions.

Everything has its place
The large internal hose garage makes it easy to stow the suction hose, ensuring safe and clean transport.

Manual cleaning
With the manual main filter and filter bag cleaning, the suction power can be quickly and easily recovered when the filter or filter bag is clogged. This significantly increases efficiency.

Convenient accessory storage
The attachable accessory box provides convenient storage for additional battery packs and cleaning accessories (available separately).

Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack

• Durable, self-cleaning fleece material
• Fits Festool CT 15, CT MINI I and CT MIDI I 2019+ model dust extractors
• Not compatible with CT MINI and MIDI models made prior to 2019
• Tip: These bags will work with your CT MINI or MIDI with a digital control panel. If you have knobs on the front of your vac, these will not work
• Includes 5 filter bags

Festool 204309 Longlife Filter Bag for CT 15 / CT MINI I / CT MIDI I

• Multi-use filter bag for Festool CT 15, CT MINI I and CT MIDI I 2019+ model dust extractor
• Suitable only for non-hazardous dust
• Made of high strength, 3-layer polyester fleece
• Sliding clasp to open/close for easy emptying and reuse

Festool 204201 HEPA Filter for CT 15 / MINI I / MIDI I

• Provides filtration at 99.97% efficiency to 0.3 microns
• Breathe easier in the shop or the jobsite with HEPA filtration
• Fits CT 15, CT MINI I and CT MIDI I 2019+ Models

The highest standard for filtration, HEPA filters capture 99.99% of all particulate matter down to .3 microns. HEPA filters (High-Efficiency Particulate Air) have quickly become the new standard for wood dust collection, both in the workshop and on the jobsite. Measured in microns, wood dust is particularly troublesome to remove from an environment once it is airborne. The best way to minimize the effects of dust created during fabrication is to use tools that are designed with dust extraction in mind. When partnered with a good dust extractor with proper filtration, you will be able to eliminate the majority of the dust created at the source before it is ever released into your environment. Designed to trap particles down to .3 microns while maintaining airflow, allowing you to reach full capacity without clogging or caking. There is no better filtration on the market today. Includes 1 HEPA Filter Elements.

Festool 577257 Standard Cleaning Set w/ Systainer3 M 137

Ideal for all cleaning tasks on surfaces and on the ground. Even narrow spaces aren't a problem with the standard cleaning set, you are ideally equipped

Includes:

• Curved hand tube D 36 HR-K AS
• Standard Floor Nozzle
• Extension pipes D 36 VR-K AS
• Crevice nozzle, D 36 FD-300
• Suction Brush
• Systainer SYS3 M 137

Festool 204083 CT Cyclone Dust Collection Pre-Separator CT-VA 20

• Compatible with Festool dust extractor models CT 26, CT 36, CT 36 AutoClean (AC), CT 48, as well as discontinued models CT 22 and CT 33.
• When used with a HEPA-certified CT Dust Extractor, the CT CYCLONE is in full compliance with OSHA’s Table 1 rule for silica dust.
• By removing larger dust and debris before it fills your filter bag, the CT CYCLONE reduces how often you need to replace filter bags and filters — saving you both time and money.
• Engineered with a unique flat cyclone design to minimize necessary space, the CT CYCLONE fits securely within the Festool SYSTAINER modular storage system — allowing for easy storage and transportation.
• Tool-free design allows for working flexibly in every application with and without CT CYCLONE pre-separator
• Reduced necessary dust bags by handling high volumes of dust and debris with cyclone technology
• Maintains consistently high suction power as a result of reducing the dust load on the main filter
• Easy to transport thanks to a stackable collection container with compact dimensions and a sturdy design
• OSHA Table 1 Compliant for crystalline silica dust

The Festool CT pre-separator with cyclone technology separates and collects coarse and fine dust before it reaches the mobile dust extractor. The dust heavy air that is drawn in is swirled into a spiral movement in the cyclone, causing the dust particles to hit against the wall of the cyclone and, due to the gravitational force, to fall into the collection container of the CT pre-separator.

For craftsmen who work with large volumes of dust and debris, the CT CYCLONE pre-separator is the simplest answer for increasing the efficiency of your CT Dust Extractor and minimizing its lifetime cost of ownership — all within a compact solution that fits seamlessly into the Festool mobility system. Compliant with OSHA’s Table 1 when used with a HEPA-certified CT Dust Extractor, the CT CYCLONE is an anti-static three-step filtration system that separates and collects large debris and coarse dust before it reaches the mobile dust extractor — decreasing the number of filters and dust bags that you’ll need to purchase to keep your CT running smoothly. Additionally, the CT CYCLONE reduces the overall dust load on the main filter and ensures consistently high suction power throughout the work process. Compatible with all CT Dust Extractors, it is a highly portable and compact cyclone solution that can be easily transported to wherever your work takes you.

Compatible with other Festool CT accessories including the boom arm, CT handle and WCR work center. Note: Cannot be used with Festool CT SYS, or CT MINI and CT MIDI models made prior to 2019. If you have a Festool Sleeved Hose, you will need an accessory to extend the location of the Plug-It power cord (575668).

Includes:

• (1) Cyclone Systainer
• (1) VAB-20 collection container bin
• (1) Connecting hose
• (1) Disposal bag
• (1) Container lid

How does this compare to the Oneida Ultimate Dust Deputy?

When selecting a dust separate for your Festool dust extractor, here are some ways that the Festool CT Cyclone excels when compared to the Oneida Ultimate Dust Deputy.

• Clear container provides visbility to remaining capacity
• Complete end-to-end anti-static design
• Modular design to connect to your Festool dust extractor's top (Sys-Dock) or to other Festool Classic or T-LOC Systainers
• Containers can be swapped easily and have a lid to prevent spillage
• Can be used with or without a container or liner for easy disposal
• With the container removed, the form factor is very compact at only 12.5" tall. With the container, it is 20" tall. Compared to the Dust Deputy which is 30.5" tall.
• Compatible with all Festool CT accessories including the CT handle, boom arm and WCR workcenter
• Robust design for long service life
• No assembly required, the Ultimate Dust Deputy requires assembly
• Guaranteed not void your Festool warranty