The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw, Model Number 576708, is built for clean, straight, controlled cuts in sheet goods, doors, flooring, and trim materials. This is a track saw designed for precise plunge cutting, panel breakdown, and finish-quality straight cuts. If you want table-saw-like accuracy in a portable format, this is the tool that gets you there without dragging full-size shop equipment onto the job.

This saw is built around a 1,200 watt motor with a variable no-load speed range of 2,000 to 5,800 RPM. On the job, that gives you the flexibility to match blade speed to the material instead of forcing one setting to do everything. For hardwood panels, plywood, chipboard, plasterboard, and similar stock up to 2-1/8 inches thick, that speed range helps you balance cut finish and feed rate. Festool also calls out increased cutting speed with the updated blade and drive package, which is exactly what pros want from a plunge saw: fast progress without beating up the edge.

Where the TS 55 FEQ-F-Plus really separates itself from an ordinary circular saw is precision. Festool designed this plunge cut track saw so the cutting edge remains unchanged from 90 degrees through 47 degrees of bevel range. That matters when you are fitting panels, scribing fillers, trimming doors, or cutting parts that need to land where you expect them to. The undercut range from -1 degree to 47 degrees adds useful flexibility for detailed installation work, and the preset positions at 0 degrees and 45 degrees speed up common adjustments.

The plunge action, spring-loaded riving knife, and FastFix blade-change setup are all practical features, not brochure filler. The riving knife helps reduce blade binding and makes it easier to re-enter existing kerfs or joints. FastFix makes blade changes quicker when you switch from general panel work to finish cuts. The transparent viewing window and start/end markings help with plunge cut placement, which is especially useful when you are cutting openings or stopping on a line instead of running off an edge.

Dust control is a big part of why track saws earn their keep, and Festool built this one to work as part of a complete low-dust cutting setup. The dust extraction port accepts 27 mm and 36 mm connections, and the saw is meant to be paired with Festool extraction and guide rail accessories. The attachable splinter guard is another real-world feature that pays off immediately. When used with a guide rail, it helps produce virtually splinter-free cuts on both sides, which means less rework on veneered plywood, prefinished panels, and visible finish materials.

From a build and handling standpoint, the tool is compact for the category at 10.58 lbs, with a slim housing that allows cuts close to walls and edges. Festool specifically notes clearance as tight as 12 mm, which is useful for flooring, built-ins, and finish carpentry where access gets cramped. The 6-1/4 inch blade size keeps the saw maneuverable while still delivering a 2-1/8 inch max cutting depth and 1-11/16 inch depth at 45 degrees. That is enough capacity for most cabinet, remodeling, and interior finish applications this saw is actually bought for.

The bigger story here is system compatibility. The TS 55 FEQ-F-Plus is not just a saw, it is part of Festool's guide rail and dust extraction platform. Pair it with the right rail, blade, extraction hose, and angle accessories and it becomes a repeatable cutting system for cabinetry, built-ins, trim, flooring, and jobsite panel processing. That is why this tool is so popular with cabinet installers, remodelers, finish carpenters, and serious woodworkers who care about cut quality and setup speed.

If you are a general contractor who needs a portable saw for breaking down sheet goods cleanly, a finish carpenter fitting high-visibility material, or a woodworking-focused user who wants better results than a standard circular saw can deliver, this saw makes sense. If all you need is rough framing cuts, it is more saw system than you need. But if clean edges, guided accuracy, bevel consistency, and low-dust operation matter, the Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw is exactly the kind of tool that earns its spot fast.

Festool TS 55 FEQ-F-Plus Track Saw Precision That Actually Shows Up in the Cut

The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw is the kind of saw you buy when clean edges, accurate bevels, and system-level repeatability matter more than saving a few bucks up front.

• Who it's for: Finish carpenters, cabinet installers, remodelers, and woodworkers who regularly cut panels, trim doors, or need straight, splinter-controlled cuts on visible material.
• Why it stands out: The consistent bevel geometry, strong dust-control integration, plunge accuracy, and guide rail system are what make it feel like more than a handheld saw.
• Worth knowing: This is a corded saw sold as part of a premium cutting system. If you are not going to use rails, extraction, and the right blades, you will not get the full value out of it.

• Is this a corded or cordless track saw? It is a corded 120 VAC track saw.
• What is the maximum cutting depth? Maximum cutting depth is 2-1/8 inches (55 mm), and depth at 45 degrees is 1-11/16 inches (43 mm).
• Does the saw support dust extraction? Yes. It has dust extraction connections for 27 mm and 36 mm hoses.
• What materials is it intended to cut? Festool lists applications including materials up to 55 mm thick, interior doors, parquet expansion joints, chipboard, and plasterboard.