The Festool TSV 60 KEB-Plus Plunge Cut Scoring Track Saw Set, Model 576735, is a corded plunge-cut track saw with a built-in scoring function for clean panel work. This is a plunge-cut saw designed for splinter-free panel cutting, plunge cuts, and precision trim work. If you cut veneered sheet goods, plastic-coated panels, compact laminate, interior doors, or countertop openings and you care what both cut edges look like, this is the saw Festool built for that exact job.

What separates this saw from a standard track saw is the scoring blade. On materials that usually chip on the top or bottom surface, the scoring cut lets the main blade finish the job with a much cleaner edge on both sides. That matters for cabinet installers, finish carpenters, and shop guys breaking down expensive panels where one bad edge can turn a good part into scrap. Festool rates the main saw at 1,500 watts and the scorer at 190 watts, with a main blade speed range of 3,000 to 6,800 RPM and a scoring blade speed of 22,000 RPM. In plain terms, it has the power to stay consistent through demanding sheet goods while still giving you the control needed for fine finish work.

The 0 to 45 degree bevel range is not just there for the spec sheet. The scoring blade matches the angle even on bevel cuts, which is a big deal if you're fitting finished panels, trim parts, or specialty surfaces that need a clean edge at more than 90 degrees. Add the 0 to 2-7/16 inch cutting depth and you get a saw that can handle full sheet processing, plunge cuts in thicker stock, interior door trimming, and recess cuts in doors and kitchen countertops without switching to a different setup.

Festool also built real jobsite practicality into the saw. The KickbackStop is there to help reduce the risk of injury and protect the workpiece if the saw detects kickback. For anybody doing plunge cuts or working near the end of a sheet, that is not a throwaway feature. It is the kind of thing you appreciate the first time a cut tries to go sideways. The FastFix spindle stop and the ability to stand the saw on its side make blade changes easier, even with the added scoring setup. That's smart design, because a scoring saw only earns its keep if changing blades and maintaining it does not become a chore.

Dust control is also part of the system. The saw uses a 27/36 mm dust extraction connection, so it is ready to pair with Festool dust extractors for cleaner cuts and better visibility on the line. On finished work, cleaner extraction means you can see the track, see the mark, and leave less mess in a customer's home or in a cabinet shop. The included sight window also helps with visibility and cut line awareness.

This saw is strongest when used as part of the broader Festool rail system. It is designed to work with Festool FS guide rails for long, accurate rip and panel cuts, and with FSK cross cutting guide rails for repeatable crosscuts on floor and facade panels. That system approach is the real point here. You are not just buying a track saw. You are buying a portable panel-processing setup that can get very close to stationary saw results when the work has to happen on site.

The included set gives you more than a bare tool. In the box you get the main wood fine cut blade, the diamond scoring blade, both hex keys, a sight window, and a Systainer3 SYS3 M 437. That means you're set up to store it properly, transport it cleanly, and get to work without chasing down the basics. One important note: this saw has a fixed power cord and does not use Festool's Plug-It cord system.

Who should buy it? If you're a cabinet installer, finish carpenter, remodeler, shop fabricator, or serious woodworker working with high-value sheet goods, the Festool TSV 60 KEB-Plus Plunge Cut Scoring Track Saw Set makes a strong case for itself. If you mainly rough-cut framing lumber or jobsite sheathing, this is more saw than you need. But if edge quality, accuracy, and clean finished cuts are part of how you make money, this one is built for exactly that.

Festool TSV 60 KEB-Plus Plunge Cut Scoring Track Saw Set Is the One for Finished Panel Work

This is the saw you buy when chipped laminate, blown-out veneer, and second-pass cleanup are costing you time and material.

• Who it's for: Cabinet installers, finish carpenters, remodelers, and shop users cutting expensive sheet goods where the edge quality actually matters.
• Why it stands out: The scoring blade is the story here, but the real value is that Festool paired it with KickbackStop, rail compatibility, bevel-capable scoring, and solid dust extraction support.
• Worth knowing: This is a corded, system-focused saw. If you are not using rails and cutting finished panels, you probably will not get the full payoff. If you are, the Festool 576735 TSV 60 KEB-Plus Plunge Cut Scoring Track Saw Set is one of the smartest portable panel-cutting setups out there.

• What kind of saw is this? It is a corded plunge-cut saw with a built-in scoring function designed for splinter-free panel cutting and precision plunge cuts.
• What materials is it intended to cut? Festool lists plywood, chipboard, specially veneered panels, plastic-coated panels, HPL compact panels, interior doors, and countertop recess work among its main applications.
• Can it bevel cut? Yes. It has a 0 to 45 degree angular range, and the scoring blade matches the angle for cleaner bevel cuts.
• Does it work with Festool rails? Yes. It can be used with Festool FS guide rails and with the FSK cross cutting guide rail.
• Does it use a Plug-It cord? No. The provided product data notes that this saw has a fixed power cord and does not feature a Plug-It cord.