Festool 576799 LR 32 Hole Drilling Set for OF1010 & OF1400 Routers in Systainer3 is a portable hole drilling set for cabinetmaking and casework layout. This is a router accessory designed for drilling shelf pin holes and 35 mm cup hinge holes on the European 32 mm system. Model Number: 576799. If you build frameless cabinets, install hardware, or need clean repeatable line boring without a dedicated shop machine, this kit is the practical way to get there with compatible Festool routers and guide rails.

What matters here is not just that it drills holes, but that it helps you drill them in the right place over and over. The LR 32 system is built around the 32 mm cabinet standard used for shelf rows and hardware layout, so you can move faster on cabinet sides, partitions, and case components without constantly resetting measurements. It is also set up for 35 mm cup hinge boring, which makes it useful for door hardware work as well as shelving.

The big advantage of this Festool hole drilling set is portability. Traditional line boring is usually a shop-only process tied to large stationary equipment. This kit lets you bring that kind of repeatable layout to a bench, an installation site, or a smaller workspace using a compatible router and Festool hole line guide rail. For cabinet installers and remodelers, that can save a return trip when a panel needs to be drilled or corrected on site.

The included hardware is set up to make the system workable right out of the case. You get the guide plate, centering mandrel, edge guides or side fences, longitudinal stop, screw clamps, operating wrench, a 35 mm hinge location cutter, and two 5 mm carbide-tipped drill bits for shelf pin work, including one bit for through holes and one for stopped holes. That matters because shelf pin drilling and hinge boring are two of the most common cabinet tasks, and this kit covers both without forcing you to piece together the basics separately.

From a design standpoint, the system is meant to control alignment and repeatability more than brute force. The guide plate and stops help index your setup off the workpiece and guide rail so spacing stays consistent down the run. The centering mandrel helps align the router to the guide plate correctly, which is the kind of detail that keeps hole position accurate and saves frustration. That is the difference between a cabinet system that feels dialed in and one that always needs tweaking.

Compatibility is a major part of this product, and it is worth paying attention to before you buy. The LR 32-SYS is suitable for Festool OF 900, OF 1000, OF 1010, OF 1010 R, and OF 1400 routers in the FS-LR 32 hole drilling system, with core listing support around the OF 1010 and OF 1400. It is designed for use with hole line guide rails, and Festool lists support by 42 inch, 55 inch, and 95 inch rails sold separately. In plain terms, this is a system accessory, not a standalone jig.

Who should buy it? Cabinetmakers, finish carpenters, installers, remodelers, and serious woodworkers who build or fit frameless casework are the right audience. If you need fast, consistent shelf pin rows and hinge boring with jobsite portability, this setup makes sense. If you do not own a compatible Festool router or do not work in the 32 mm cabinet system, this is probably more system than you need.

Serious cabinet accuracy without a giant boring machine

The Festool 576799 LR 32 Hole Drilling Set for OF1010 & OF1400 Routers in Systainer3 is the kind of system accessory that makes a lot of sense if cabinet work is a regular part of your day.

• Who it's for: Cabinetmakers, installers, and woodworkers who need clean, repeatable shelf pin rows and 35 mm hinge holes in frameless casework.
• Why it stands out: It brings true 32 mm system drilling to a portable router-and-rail setup, and it comes with the core accessories needed to get to work.
• Worth knowing: This is not a standalone jig. You need a compatible Festool router and the proper hole line guide rail, so it is best for users already in the Festool system or those building around it on purpose.

• What is this product used for? It is used for drilling shelf pin holes and 35 mm cup hinge holes in cabinets and casework using the European 32 mm system.
• Is this a standalone tool? No. It is a router accessory system that works with compatible Festool routers and hole line guide rails.
• Which routers does it fit? Available data lists compatibility with Festool OF 900, OF 1000, OF 1010, OF 1010 R, and OF 1400 routers in the FS-LR 32 system.
• Are guide rails included? No. Supported 42 inch, 55 inch, and 95 inch hole line guide rails are sold separately.