Husqvarna Construction 14 Inch Segmented Turbo Diamond Blade for Concrete and Masonry, 10 Pieces is a professional diamond blade pack built for concrete, masonry, brick, block, and other abrasive construction materials. This is a diamond blade designed for fast cutting in concrete and masonry applications. Model Number 579816402. If you run masonry saws or power cutters and need a 14 inch blade that can handle hard, abrasive material without wasting time on slow starts, this is the kind of blade pack that makes sense.

The big selling point here is cutting speed with control. Husqvarna calls out a segment design that reduces contact surface in the concrete, which matters because a new blade can feel grabby on first use if it is not designed well. Less contact at the start helps the blade enter the cut quicker and in a more predictable way. On the job, that means less fighting the blade when you are lining up your first pass on cured concrete or masonry units.

This blade is also built around versatility in common construction material. The provided product data specifically points to cured concrete, building block, brick, roof tile, reinforced concrete, and other abrasive materials. That makes it a solid fit for contractors who are not cutting the exact same thing all day. Instead of swapping blades every time the material changes, you get a general-purpose construction blade aimed at hard materials and everyday site work.

Husqvarna also calls out a 12 mm segment height, listed separately as 0.4 inch, with claims of faster cutting and longer blade life compared to the previous Vari-Cut series. The practical takeaway is simple: more usable segment means more work before the blade is done, and the taller segment gives the blade more life in demanding material. For crews cutting regularly into concrete and masonry, blade life is not a minor detail. It directly affects downtime, replacement frequency, and cost per cut.

Jobsite flexibility matters too, and this blade is rated for wet or dry use. That gives you options based on your saw, dust management setup, and the type of cut you are making. The product data also mentions narrow water slots and a low-noise core to reduce operating noise. That will not make cutting concrete quiet, but it does show this blade was designed with real-world use in mind rather than just raw cutting performance on paper.

Fitment is straightforward for saws that accept a 14 inch blade with a 1 inch arbor, and supplementary data also lists an Easy Fit center hole with 1 inch / 20 mm arbor compatibility. The main source data specifically notes use with masonry saws, which is the safest application callout here. If you already run compatible concrete or masonry cutting equipment, this pack gives you ten blades ready for recurring work rather than buying one at a time.

This product makes the most sense for masonry contractors, concrete crews, general contractors, and remodelers who cut abrasive material often enough to justify a 10-pack. It is also a smart buy for shops that want matching blades on hand for multiple saws or for keeping replacement stock ready. If your work is mostly concrete, block, brick, and similar materials, this Husqvarna blade pack is aimed squarely at that workload.

Husqvarna Construction 14 Inch Segmented Turbo Diamond Blade for Concrete and Masonry, 10 Pieces is the kind of stock-up pack that makes sense for real cutting work

If you cut concrete, block, and brick often, buying a proven 10-pack beats scrambling for replacement blades mid-job.

• Who it's for: Concrete and masonry crews, general contractors, and remodelers running compatible masonry saws on abrasive material.
• Why it stands out: You get a 14 inch Husqvarna diamond blade built for fast starts, wet or dry use, and longer service life from the taller segment design.
• Worth knowing: The value here is strongest for people who burn through blades regularly. If you only cut masonry once in a while, a 10-pack may be more blade than you need at one time.

• What materials is this blade intended to cut? Source data supports use on cured concrete, masonry, building block, brick, reinforced concrete, roof tile, and other abrasive construction materials.
• Can this blade be used wet or dry? Yes. The product data states it is suitable for wet or dry use.
• What saw size does this blade fit? It is a 14 inch diamond blade with a 1 inch arbor, with supplementary data also listing 20 mm Easy Fit compatibility.
• Is this a single blade or a pack? This product is sold as a 10-piece pack.