The Woodpeckers ThinRip Guide w/ Rack-It, model TRG, is a table saw thin-rip guide for woodworkers who need narrow, repeatable cuts without fighting the fence. This is a thin-rip guide designed for cutting consistent narrow strips on a table saw. If you make edge banding, inlay stock, small parts, or any other thin ripping cuts where consistency matters, this accessory gives you a more controlled setup.

What makes this style of guide useful is simple: it gives the workpiece a defined reference point near the blade so you can set narrow cuts with more confidence. The scale and pointer system is there to make setup more precise, and the bearing at the front of the guide is meant to run right at the blade-side reference point. In practical use, that helps you dial in narrow widths instead of sneaking up on the cut over and over.

The Woodpeckers ThinRip Guide w/ Rack-It is clearly built with accuracy in mind. The body is machined aluminum, the scale markings are easy to see, and the large adjustment knob is sized for real hands, not tweezers. That matters on the saw because small accessories are only helpful if you can actually set them without a lot of fuss. The dual locking knobs and compact body also keep the setup looking solid in the miter slot.

Fit is a big buying point here. Based on the product information shown, this guide fits table saws with a T-track shaped 3/8 inch x 3/4 inch miter slot. That is the dimension most buyers need to verify before anything else. If your saw uses that standard style slot, this guide is built around that platform. If your saw does not, this is the part to check before you buy.

There is also a real jobsite or shop-floor convenience angle here that is easy to overlook. The included Rack-It bracket gives the guide a dedicated place on the wall when it is not in use. That is not just about storage. Precision accessories work better when they are not getting knocked around in a drawer under other hardware and setup blocks.

Woodpeckers also calls out a scale reference that can be adjusted to the nearest mark with the bearing just kissing the saw blade. For the user, that means the setup is intended to be tuned directly to your blade position instead of relying on rough eyeballing. If you are chasing repeatable thin strips, that is the whole point.

This is a smart buy for woodworkers, cabinetmakers, furniture builders, and serious hobbyists who cut a lot of thin stock and want a dedicated table saw accessory for the job. It is especially useful when the work calls for repeatability and clean process more than improvisation. If thin ripping is something you do more than once in a while, a purpose-built guide like this makes more sense than trying to fake it with stops and scrap blocks every time.

Woodpeckers ThinRip Guide w/ Rack-It is a smart buy for serious table saw work

If thin strips are part of your workflow, this is the kind of accessory that makes the process more repeatable and a lot less improvised.

• Who it's for: Woodworkers, cabinet shops, and serious hobbyists making narrow stock on a table saw.
• Why it stands out: Purpose-built thin ripping setup, clear adjustment scale, standard T-track miter slot fit, and wall storage with the Rack-It bracket.
• Worth knowing: Check your saw's miter slot first. This guide is meant for a T-track shaped 3/8 inch x 3/4 inch slot, so fit matters.

• What kind of saw is this guide made for? It is a thin-rip guide designed for table saw use.
• What miter slot does it fit? The product imagery states it fits saws with a T-track shaped 3/8 inch x 3/4 inch miter slot.
• Can it be stored on the wall? Yes. The included Rack-It bracket is shown as a wall storage solution for the guide.
• Where is it made? The product is marked Made in USA.