DTS / DTSC 400 Abrasives
Delta Sandpaper for the DTS 400 and DTSC 400
These triangular abrasives fit the Festool DTS 400 delta sander and its cordless DTSC 400 counterpart. Most buyers start with a Granat 30-sheet starter pack or 100-sheet pro pack to learn which grits they use, then reorder single grits from 40 to 400 in 10, 50, or 100 packs. Rubin2 sheets from 80 to 220 grit target raw wood. Granat PROfile sheets, a 100-piece Granat value set in a Systainer3, and a Granat NET protection pad are also here.
What to Look For
- Grit sequence. Do not skip more than one grit step, or scratches from the coarser grit will show through finish.
- Abrasive line. Granat is the general-purpose choice. Rubin2 is made for bare softwood and hardwood.
- Pack size. Ten-packs suit occasional use. Fifty and 100-packs cost less per sheet for steady work.
- Pad care. A protection pad shields the sanding pad from wear when you work into edges.
Shop DTS 400 abrasives at The Tool Nut, an authorized dealer since 1994, with free shipping on most orders and rewards points on every purchase.
DTS / DTSC 400 Abrasives FAQ
Should I buy a starter pack or single grits?
If you are new to the DTS 400, a starter pack shows which grits you go through fastest. After that, buy those grits in 50 or 100 packs and keep a few 10-packs of the rest.
Granat or Rubin2 for bare wood?
Both work on bare wood. Rubin2 is made specifically for wood. Granat is the better pick when the same sander also sees paint, primer, or filler.