Skip to content

Festool Router Guides

Festool Router Guides and Template Guides

Festool router guides control where the bit goes. Most of this collection is template guides in metric sizes from 8.5 mm to 40 mm outside diameter, plus 1/2", 3/4", and 1" imperial guides that work with standard templates. It also has guide bushing adapters, a template guide base for the OF 2200, a parallel side edge guide for the OF 1010 and MFK 700, the LR 32 guide plate, and a ball bearing guide for the OFKC 500.

What to Look For

  • Outside diameter. The OD must match the template system you use.
  • Adapter. Some routers need a guide bushing adapter before a template guide will mount.
  • Bit clearance. The inside diameter has to clear the bit with room to spare.
  • Edge or template. A parallel edge guide follows the workpiece edge. A template guide follows a pattern.

The Tool Nut is a specialty tool store and authorized Festool dealer since 1994. Free shipping on all Festool orders, free Festool swag with most orders, and rewards points on every purchase.

Festool Router Guides FAQ

How do I figure template guide offset?

Subtract the bit diameter from the guide's outside diameter and divide by two. That is how far the cut sits from the template edge. Size your template larger or smaller by that amount.

Can I use imperial templates with a Festool router?

Yes. The 1/2", 3/4", and 1" OD guides match common imperial template kits. Confirm whether your router needs a guide bushing adapter first.