Skip to content

Fisch Tools

Fisch Forstner, Wave Cutter, and Brad Point Bits

Fisch tools at The Tool Nut are woodworking drill bits in three styles. Brad point bits come in 7 and 29 piece imperial sets and an 8-piece metric set. Black Shark forged steel Forstner bits come in 4, 7, and 16 piece imperial sets, the larger in a wooden box, plus a single 35mm bit. Wave Cutter Forstner-style bits come in 7 and 16 piece sets and a 35mm single.

What to Look For

  • Brad point. The center spur starts exactly on your mark and the spurs score a clean rim. Use them for dowel holes and through holes in wood.
  • Forstner. Flat-bottom holes for hinge cups, plugs, and recesses. Black Shark bits are forged steel.
  • Wave Cutter. A wave-edged rim for fast, clean flat-bottom holes in wood.
  • 35mm singles. The 35mm size is the standard bore for European cup hinges.

Shop Fisch tools at The Tool Nut, an authorized dealer since 1994, with free shipping on most orders and rewards points on every purchase.

Fisch Tools FAQ

Black Shark or Wave Cutter?

Both drill flat-bottom holes. Black Shark bits use a classic Forstner rim in forged steel. Wave Cutter bits use a wave-edged rim. Start with a 7-piece set of either and add the 35mm single if you install cabinet hinges.

Should I run Forstner bits in a drill press?

A drill press gives the cleanest, squarest holes and is the safer choice for large diameters. Smaller Forstner bits work in a handheld drill if you clamp the workpiece and run at a moderate speed.