Amana Tools Festool Domino DF 500 5 mm Double-Flute Carbide Tipped Bit (316022)
Amana Tools Festool Domino DF 500 5 mm Double-Flute Carbide Tipped Bit (316022)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Amana Tools 316022 Carbide Tipped 2 Flute RH Rotation Bit for Festool Domino Joiner is a replacement Domino joiner cutter made for the Festool DF500 system. This is a joiner bit designed for routing slots for loose tenon joinery in solid wood and wood composites. Model 316022 uses a 5 mm diameter cutter with a 20 mm cutting height and 49 mm overall length, making it the right size when you need precise, smaller-format Domino mortises.
This bit is built specifically for Domino machine work, which matters because joinery cutters need to cut clean, consistent slots rather than just remove material. The 5 mm diameter sets the mortise width, while the 20 mm cutting height gives the tool the reach needed for Domino slot cutting. If you are building smaller assemblies, cabinet parts, face frames, trim components, or other work where a 5 mm Domino is the right fit, using the correct cutter size helps keep the joint tight and predictable.
Amana specifies a carbide-tipped cutting design with 2 flutes and right-hand rotation. In practical terms, that means this Festool Domino bit is built for repeated routing in wood materials with better edge retention than an all-steel cutter. The 2-flute layout is a proven format for controlled cutting and chip removal, and on a joiner that translates into cleaner slot formation and less guesswork during assembly.
The shank uses an internal M6 x 0.75 thread, and this model is listed for Festool number DF500. That compatibility point is the big one: this is not a general-purpose router bit, and it is not meant to fit every joinery machine. It is a purpose-fit replacement cutter for the Festool Domino DF500 platform, so buyers looking for a correct match for that machine can skip the trial-and-error.
Application-wise, Amana lists this bit for routing slots in solid wood and wood composites. That covers the kinds of materials most Domino users actually work with on the bench or on site, from hardwood parts to sheet-good-based assemblies. If your work depends on repeatable joinery and proper mortise sizing, cutter accuracy matters just as much as the machine itself.
Who should buy it? Woodworkers, cabinetmakers, furniture builders, and finish carpenters using a Festool DF500 who need a 5 mm replacement cutter. If your current cutter is worn, chipped, or just not giving you the clean slot quality you want anymore, the Amana Tools 316022 Carbide Tipped 2 Flute RH Rotation Bit for Festool Domino Joiner is the straightforward fit-for-purpose replacement.
Purpose-Built for Accurate Domino Joinery
This cutter is made for one job: cutting the correct mortise size in a Festool Domino DF500. When joinery fit matters, using the right Domino cutter keeps your slots consistent and your assembly work more predictable.
- 5 mm diameter for smaller Domino mortise work
- 20 mm cutting height supports slot routing depth in wood materials
- Carbide-tipped, 2-flute right-hand rotation design
Key Specifications
| Diameter | 5 mm |
|---|---|
| Cutting Height | 20 mm |
| Overall Length | 49 mm |
| Flute Count | 2 Flutes |
| Rotation | Right-Hand Rotation |
| Thread (Inside Shank) | M6 x 0.75 |
| Machine Compatibility | Festool DF500 |
| Application | Routing slots in solid wood and wood composites |
Compatibility
Built For
Tool Nut's Take
Buy the Right Cutter, Get the Right Joint
The Amana Tools 316022 Carbide Tipped 2 Flute RH Rotation Bit for Festool Domino Joiner is the kind of part that keeps a good joiner working like it should.
- Who it's for: DF500 owners doing 5 mm Domino joinery in solid wood or wood composite stock.
- Why it stands out: It is purpose-built for the Festool application, with a carbide-tipped 2-flute design and the correct M6 x 0.75 internal thread setup.
- Worth knowing: This is a specialty replacement cutter, not a general router bit, so machine fit is the first thing to check before you order.
Common Questions
- What machine is this bit made for? It is listed for the Festool Domino DF500 joiner.
- What size mortise cutter is it? This bit has a 5 mm diameter.
- What materials is it intended to cut? Amana lists it for routing slots in solid wood and wood composites.
- What thread does the shank use? The inside shank thread is M6 x 0.75.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

