The DEWALT DWHT83192 6 in. Large Trigger Clamp is a one-handed trigger clamp built for holding material securely during assembly, fastening, cutting prep, and general shop work. This is a trigger clamp designed for fast, controlled workholding. Model Number: DWHT83192. With a 6 in. maximum opening, 300 lb clamping force, and 3-1/4 in. throat depth, it is sized for everyday clamping jobs where speed matters as much as holding power.

The big selling point here is that you get real pressure without needing two hands on a screw handle. The trigger mechanism makes it easy to set the clamp, squeeze to pressure, and move on. If you are fitting trim, holding a board for a cut, keeping parts aligned during glue-up, or pinning down stock while you drill pocket holes, that one-hand operation saves time and cuts down the usual juggling act.

DEWALT backs that up with a reinforced nylon body and a heat-treated steel bar. That combination matters because the body needs to stay rigid under load while the bar handles repeated clamping pressure without bending up easily. For a hand clamp in this size, that gives it a good balance between durability and manageable weight. It is built like a working clamp, not a light-duty hobby piece.

The 3-1/4 in. throat depth gives you more reach from the edge than many smaller quick clamps. That extra reach helps when the edge of the material is not the exact point you need to hold. Instead of crowding the work right at the outer edge, you can clamp farther in and keep better control over alignment.

DEWALT also includes removable jaw pads to help reduce marring. That is worth calling out because a lot of clamp damage does not come from too much force, it comes from hard contact points on finished or soft material. The pads give you a little more forgiveness when working with painted surfaces, trim, cabinet parts, or boards you do not want chewed up.

Another useful feature is the Quick-Change button that converts the clamp into a spreader. That adds flexibility without making the tool complicated. If you need to push material apart during fitting or installation, you can reconfigure the same clamp instead of carrying separate spreading tools for occasional jobs.

This DEWALT hand clamp is a good fit for carpenters, remodelers, cabinet installers, woodworkers, general contractors, and serious DIY users who want a faster clamp for repeated setups. If you need a compact workholding tool that applies decent pressure, works one-handed, and pulls double duty as a spreader, the DEWALT DWHT83192 6 in. Large Trigger Clamp makes a lot of sense.

DEWALT DWHT83192 6 in. Large Trigger Clamp Keeps It Simple and Useful

This is the kind of clamp that earns a permanent spot on the bench because it is quick, strong for its size, and easy to use one-handed.

• Who it's for: Carpenters, cabinet guys, remodelers, and DIY users who need a fast workholding clamp for boards, trim, assemblies, and jobsite setups.
• Why it stands out: You get 300 lb of clamping force, a 3-1/4 in. throat depth, and clamp-to-spreader conversion in one straightforward tool.
• Worth knowing: This is a single 6 in. clamp, not a multi-pack. It is a good everyday size, but if you regularly clamp wider assemblies you will still want longer clamps in the rack.

• What type of clamp is this? It is a trigger clamp designed for one-handed clamping and quick setup.
• How much pressure does it apply? The rated clamping force is 300 lb.
• What is the maximum opening capacity? The maximum opening is 6 in.
• Can it be used as a spreader? Yes. The Quick-Change button allows the clamp to convert to a spreader.
• How deep is the throat? The throat depth is 3-1/4 in.