Diablo 5-7/8-in. x 32-Teeth Steel Demon Saw Blade for Medium Metal (D0532F)
Diablo 5-7/8-in. x 32-Teeth Steel Demon Saw Blade for Medium Metal (D0532F)
Out of Stock - Available to Order - Usually ships in 5-7 days
Product Details
Product Details
Key Features
Overview
The Diablo D0532F 5-7/8 in. x 32-Tooth Steel Demon Saw Blade for Medium Metal is a carbide-tipped metal cutting circular saw blade built for fast, accurate cuts in mild steel. This is a circular saw blade designed for cutting medium metal and mild steel stock. Model Number: D0532F. If you run a trim saw and need a blade for steel studs, angle iron, channel, flat bar, threaded rod, or EMT conduit, this one is aimed right at that work.
What matters here is not just the 5-7/8 inch diameter and 32-tooth layout, but how those details work together. Diablo uses a Triple Chip Grind tooth pattern for metal cutting, which helps the blade stay controlled in the cut and leaves a cleaner edge than abrasive wheels. The thin kerf reduces cutting resistance and heat build-up, so cordless and corded trim saws do not have to work as hard to get through light-gauge steel and other mild steel material.
Diablo also built this blade around durability. The TiCo Hi-Density Carbide is engineered for mild steel applications, and the Tri-Metal Shock Resistant Brazing helps the teeth hold up under impact. On the job, that means better tooth retention and longer usable blade life when you are cutting repetitive metal stock instead of burning through disposable abrasive discs.
For cut quality, the stabilizer vents and laser cut body matter. They help reduce noise, vibration, and blade movement, which is a big deal in metal cutting where wandering and deflection can ruin fit-up fast. The Perma-SHIELD coating adds another layer of real-world value by resisting heat build-up, gumming, and corrosion, especially if the blade spends time in a truck, gang box, or shop between uses.
This blade is rated for mild steel with a maximum wall thickness of 1/8 inch and a maximum material diameter of 1 inch. That makes it a focused blade, not a do-everything metal blade. Used within that range, it is built to deliver precise, burr-free cuts with less spark and less airborne dust than standard grinding discs. If your work stays in light structural steel, studs, conduit, and similar stock, that is where this blade earns its keep.
Fit is straightforward. The blade is sized at 5-7/8 inches and works with 20 mm and 5/8 inch arbor setups. It is a good match for pros and serious DIY users doing metal framing, electrical rough-in, HVAC support work, or general fabrication with a trim saw. If you need a dedicated metal cutting blade instead of forcing a general-purpose blade to do the job, this is the kind of accessory that saves time and leaves cleaner results.
Designed for Fast, Controlled Metal Cutting
This blade is built to give a trim saw a more controlled way to cut mild steel than an abrasive wheel. The payoff is straighter cuts, less spark, and edges that usually need a lot less cleanup.
- 32-tooth Triple Chip Grind layout for clean metal cutting performance
- Thin kerf body reduces drag and heat for easier cuts in cordless or corded saws
- Rated for mild steel up to 1/8 inch wall thickness and up to 1 inch maximum diameter
What's in the Box
- (1) Diablo D0532F 5-7/8 in. x 32-Tooth Steel Demon Saw Blade for Medium Metal
- (1) Arbor bushing
Key Specifications
|
|
D0532F |
|---|---|
|
|
5-7/8 in. |
|
|
32 TCG |
|
|
20 mm and 5/8 in. |
|
|
0.059 in. |
|
|
5,000 RPM |
|
|
Mild steel / low carbon steel |
|
|
1.1 lbs |
Compatibility
Built For
Pro Tip
Keep the Diablo D0532F 5-7/8 in. x 32-Tooth Steel Demon Saw Blade for Medium Metal on mild steel within its 1/8 inch wall thickness limit and let the blade feed at its own pace. If you lean on it too hard, you add heat and increase the chance of deflection, which works against what this thin-kerf blade is designed to do.
Warranty & Support
Tool Nut's Take
Diablo D0532F 5-7/8 in. x 32-Tooth Steel Demon Saw Blade for Medium Metal gets right to the point
This is a purpose-built metal cutting blade for guys who want cleaner cuts in mild steel without the mess and throwaway feel of abrasive discs.
- Who it's for: Anyone running a trim saw for steel studs, conduit, angle iron, threaded rod, or light fabrication work in mild steel.
- Why it stands out: The TCG tooth pattern, thin kerf, stabilizer vents, and carbide build all support cleaner, straighter cuts with less spark and less rework.
- Worth knowing: This is not a general heavy-metal blade. Stay inside the 1/8 inch wall thickness limit and match it to a saw that accepts a 5-7/8 inch blade and 20 mm or 5/8 inch arbor setup.
Common Questions
- What materials is this blade made to cut? It is designed for mild steel and low carbon steel, including steel studs, angle iron, channel, flat bar, threaded rod, and EMT conduit.
- What arbor sizes does it fit? This blade is set up for 20 mm and 5/8 inch arbor applications.
- What is the maximum material thickness? Diablo lists this blade for mild steel with a maximum wall thickness of 1/8 inch.
- What is the maximum blade speed? The maximum rated speed listed is 5,000 RPM.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

