Diablo 12-in. x 96-Tooth Medium Aluminum Saw Blade (D1296N)
Diablo 12-in. x 96-Tooth Medium Aluminum Saw Blade (D1296N)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Diablo D1296N 12 in. x 96-Tooth Medium Aluminum Saw Blade is a carbide-tipped saw blade made for cutting non-ferrous metals and plastics with a clean finish. This is a 12 inch miter saw blade designed for smooth, accurate cutting in aluminum, brass, copper, laminate, melamine, and plastic. Model Number D1296N. If you are running a 12 inch miter saw, sliding miter saw, chop saw, or table saw and you need cleaner edges than a rough framing blade can give you, this is the kind of blade you reach for.
The big selling point here is the tooth design. Diablo uses a 96-tooth triple chip grind pattern, which is a proven setup for non-ferrous metal cutting and fine-finish work. In practical terms, that tooth layout helps reduce chipping and leaves a smoother cut in materials that can tear out, gum up, or leave ragged edges with the wrong blade. For anyone cutting aluminum trim, extrusion, plastic panels, laminate flooring, or melamine shelving, that matters more than raw speed.
Diablo also builds this blade with TiCo carbide teeth, which are made to handle the extra wear that comes from abrasive materials. That means better tooth life and more consistent performance across repeated cuts. When you are working through aluminum stock or plastic sheet and you need the blade to stay accurate instead of getting dull fast, carbide quality is not a throwaway spec. It directly affects cut quality and how often you have to swap blades.
The 0.091 inch kerf helps on two fronts. First, it keeps the cut narrow for efficient material removal. Second, it supports cleaner, more controlled cutting when paired with the blade's precision tensioning and laser-cut construction. Diablo also calls out a precision-cut arbor, vibration dampening, and heat expansion slots. On the job, that adds up to a blade that stays flatter, runs truer, and is less likely to wander or leave a rough finish as heat builds during repetitive cutting.
For jobsite durability, the Perma-SHIELD non-stick coating is worth paying attention to. Coatings like this help fight gumming, heat buildup, and corrosion, which is especially useful when you are cutting materials that can leave residue on the plate. A blade that stays cleaner tends to cut more consistently, and less buildup means less frustration when the workday gets long.
Fitment is straightforward. The blade has a 12 inch diameter, a 1 inch arbor, and a maximum speed rating of 6,000 RPM. That makes it a practical match for many 12 inch saws used in finish carpentry, remodeling, flooring, cabinet work, and light fabrication. It is especially useful for users who need one blade that can move between aluminum, plastics, laminate, melamine, and similar materials without beating up the workpiece.
Who should buy it? This blade makes the most sense for remodelers, finish carpenters, flooring installers, cabinet installers, and serious DIY users who care about cut quality in thin aluminum, trim stock, laminate, and plastic. If your main job is rough wood cutting, this is not the blade you leave on full time. But if your work includes finish-sensitive materials where chipping, burrs, and rough edges slow you down, the Diablo D1296N earns its spot fast.
Built for Smooth Finish Work
This blade is aimed at finish-quality cutting, not rough demolition work. The tooth count, grind pattern, and thin kerf are all chosen to help you cut non-ferrous materials cleaner and with less edge damage.
- 96-tooth triple chip grind for smoother cuts in aluminum and plastics
- 0.091 inch kerf for accurate cuts with less material waste
- Perma-SHIELD coating helps reduce gumming, heat, and corrosion
Key Specifications
| Blade Diameter | 12 in |
|---|---|
| Tooth Count | 96 |
| Arbor Size | 1 in |
| Kerf | 0.091 in |
| Tooth Grind | Triple Chip Grind |
| Maximum RPM | 6,000 RPM |
| Blade Material | Carbide |
| Made In | Italy |
Compatibility
Built For
Pro Tip
If you are cutting laminate flooring with this blade, use it on a sliding miter saw or table saw, not a chop-style saw. That setup gives the tooth geometry a better chance to leave the edge clean instead of chipping the surface layer.
Tool Nut's Take
Diablo D1296N 12 in. x 96-Tooth Medium Aluminum Saw Blade for clean-cut work
This is the blade you buy when cut quality in aluminum and plastics matters more than brute-force speed.
- Who it's for: Remodelers, flooring installers, finish carpenters, cabinet installers, and anyone cutting aluminum or plastic on a 12 inch saw.
- Why it stands out: The 96-tooth triple chip grind, TiCo carbide teeth, and thin kerf are a solid combination for cleaner edges and less chipping in non-ferrous materials.
- Worth knowing: This is a specialty blade. If most of your work is rough framing lumber, keep a wood blade handy and swap to this one when finish quality matters.
Common Questions
- What materials is this blade designed to cut? It is designed for non-ferrous metals and plastics, including aluminum, brass, copper, laminate, melamine, and similar materials.
- What saws does it fit? It fits many 12 inch miter saws, sliding miter saws, chop saws, and table saws that use a 1 inch arbor.
- What is the tooth configuration? This blade uses a 96-tooth triple chip grind, which is commonly used for smooth cutting in aluminum and other finish-sensitive materials.
- What is the maximum speed rating? The maximum rated speed is 6,000 RPM.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

