Diablo 14-in. x 90-Teeth Steel Demon Cermet II Saw Blade for Thin Metal (D1490CF)
Diablo 14-in. x 90-Teeth Steel Demon Cermet II Saw Blade for Thin Metal (D1490CF)
Out of Stock - Available to Order - Usually ships in 5-7 days
Product Details
Product Details
Key Features
Overview
Diablo D1490CF 14 in. x 90-Tooth Steel Demon Cermet II Saw Blade is a 14 inch metal cutting circular saw blade built for ferrous metals, including stainless steel. This is a circular saw blade designed for thin to medium metal cutting on dedicated low RPM metal cutting saws. Model Number: D1490CF. If you are cutting steel stud, angle iron, flat bar, conduit, pipe, or threaded rod and want a cleaner edge than a grinding disc, this blade is aimed right at that job.
The big story here is the Cermet II tooth design. Compared to standard carbide metal cutting blades, Cermet is built to handle higher heat and resist wear better in demanding metal work. That matters when you are making repeated cuts in stainless or structural steel and do not want the blade falling off fast halfway through the job. Diablo also pairs the 90-tooth layout with a triple chip grind, which is a proven setup for smoother metal cutting and a more burr-free finish.
Diablo built this blade for lower speed dedicated metal saws, with a maximum rating of 1,800 RPM. That is an important point, because blade performance and safety both depend on matching the blade to the correct saw type. The 14 inch diameter and 1 inch arbor size fit the common format used on many dry-cut metal saws and chop saws in this class. If your work centers on steel fabrication, metal framing, shop cutting, or jobsite prep, those specs matter more than flashy claims.
On the job, the thin kerf helps reduce resistance and heat buildup, which makes the cut feel easier and helps preserve tooth life. Diablo also uses a Perma-SHIELD nonstick coating to fight heat, gumming, and corrosion. That is not just a finish for the catalog. In metal cutting, excess heat is what shortens blade life and hurts cut quality. Keeping friction down helps the blade stay straighter and more consistent through long runs.
Laser-cut stabilizer vents and a laser-cut arbor are there for the same reason: control. They help reduce vibration, support accurate rotation, and keep the blade stable as it heats up in use. Add in the tri-metal shock-resistant brazing at the teeth, and you have a blade that is engineered to deal with impact and repeated cutting stress better than basic metal blades.
This blade is a strong fit for metalworking, electrical, mechanical, general contracting, and anyone regularly cutting ferrous stock with a dedicated low RPM saw. It is not the blade to buy if you just need a general wood blade that can occasionally touch metal. It is purpose-built for steel. If clean cuts, longer life, and less post-cut cleanup matter to your workflow, that is exactly where this Diablo Steel Demon blade earns its keep.
Made for Real Metal Cutting
This blade is built for ferrous metal work where cut quality and blade life actually matter. Instead of leaving a rough edge like an abrasive wheel, it is designed to cut steel and stainless with less burr, less heat, and fewer interruptions.
- 90-tooth triple chip grind helps deliver cleaner cuts in metal
- Cermet II teeth are built for heat resistance and longer wear
- Perma-SHIELD coating helps reduce friction, gumming, and corrosion
- Maximum speed rating is 1,800 RPM for dedicated low RPM metal cutting saws
What's in the Box
- (1) Diablo D1490CF 14 in. x 90-Tooth Steel Demon Cermet II Saw Blade
Key Specifications
| Blade Diameter | 14 in. |
|---|---|
| Tooth Count | 90 |
| Arbor Size | 1 in. |
| Maximum Speed | 1,800 RPM |
| Kerf | 0.083 in. |
| Tooth Grind | Triple Chip Grind |
| Material Cut | Ferrous metal, including stainless steel |
| Made In | Italy |
Compatibility
Built For
Pro Tip
Check your saw speed before mounting this blade. The Diablo D1490CF is rated for dedicated low RPM metal saws up to 1,800 RPM, so matching the blade to the right saw is what gives you the clean cut and long life you are paying for.
Tool Nut's Take
Diablo D1490CF 14 in. x 90-Tooth Steel Demon Cermet II Saw Blade is the right call for cleaner steel cuts
If you are still chewing through metal with abrasive wheels, this blade is the upgrade that makes the whole job feel more controlled.
- Who it's for: Pros and serious DIY users running a dedicated low RPM 14 inch metal cutting saw for steel, stainless, conduit, rod, and metal framing stock.
- Why it stands out: Cermet II teeth, a 90-tooth triple chip grind, thin kerf design, and heat-fighting coating all point to the same result: longer blade life and cleaner cuts in ferrous metal.
- Worth knowing: This is a purpose-built metal cutting blade, not a catch-all saw blade. Make sure your saw uses a 1 inch arbor and stays within the 1,800 RPM limit.
Common Questions
- What does this blade cut? It is designed for ferrous metals including stainless steel, steel stud, angle iron, flat bar, conduit, pipe, and threaded rod.
- What size saw does it fit? It is a 14 inch blade with a 1 inch arbor for dedicated low RPM metal cutting saws that accept that size.
- What is the maximum RPM rating? The blade is rated for a maximum of 1,800 RPM.
- What tooth pattern does it use? It uses a 90-tooth triple chip grind, which is commonly chosen for cleaner metal cutting and reduced burrs.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

