Diablo 7/8-in. x 17-1/2-in. Auger Bit for Wood & Nail-Embedded Wood (DAG3090)
Diablo 7/8-in. x 17-1/2-in. Auger Bit for Wood & Nail-Embedded Wood (DAG3090)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Diablo DAG3090 7/8 in. x 17-1/2 in. Auger Bit is a long-reach wood drilling bit built for boring clean holes in framing lumber, wood assemblies, and nail-embedded wood. This is an auger bit designed for wood drilling in clean lumber and wood with embedded nails. Model Number: DAG3090. If you are roughing in wiring, plumbing, or general framing work and need a bit that keeps moving when the wood is not perfect, this is the kind of accessory that earns a spot in the bag.
What matters here is not just the diameter and length. Diablo built this bit around real jobsite problems. The Dura-Tip self-feeding tip helps pull the bit into the work so you spend less time forcing the drill forward. The two-step cutting action is there to keep the hole tracking cleanly, and the dual cutting edge design helps the bit stay productive in both standard wood drilling and tougher nail-embedded applications.
Deep flutes are a big deal on a long auger bit like this. When chips pack up in the hole, drilling slows down, heat builds, and cordless tools lose efficiency fast. The optimized deep flute design helps clear chips out as the bit advances, which means smoother drilling and less time backing out to unload material. Diablo specifically calls out more holes per battery charge, and that tracks with how chip evacuation affects real-world runtime.
The 7/16 in. hex quick-change shank is another practical advantage. It gives the bit a secure connection in compatible drill drivers and impact drills, and it is easier to swap than a round shank bit when you are moving between sizes. That hex interface also improves stability under load, which matters when a long auger bit starts biting into dense or inconsistent framing stock.
In use, this auger bit makes the most sense for tradespeople who drill repeated pass-through holes in dimensional lumber, studs, joists, and repair work where hidden nails are part of the job. Electricians, plumbers, remodelers, framers, and general contractors are the obvious audience. Serious DIY users working on structural repairs or additions will appreciate it too, but this is not a light-duty shelf-hanging accessory. It is a purpose-built drilling bit for demanding wood boring work.
Compatibility is straightforward. The Diablo DAG3090 7/8 in. x 17-1/2 in. Auger Bit is designed for use in corded or cordless drill drivers and impact drills that accept a 7/16 in. hex shank. If your work involves boring larger holes through wood with speed, reach, and better tolerance for hidden nails, this auger bit solves a very specific problem and does it with the right geometry.
At a Glance
Drill Through Tough Framing Stock
This auger bit is built for the kind of wood drilling that slows down ordinary bits. When you hit knots, layered framing, or hidden nails, the cutting geometry is meant to keep the hole moving instead of forcing a tool change.
- Designed for clean wood and nail-embedded wood
- Dura-Tip self-feeding tip helps pull the bit into the cut
- Dual cutting edge design supports smoother hole drilling
Keep Chips Moving
Long auger bits only work well when they clear waste fast. Diablo uses deep flutes to move chips out of the hole so the bit can stay productive, especially in repeated boring work with a cordless drill.
- Optimized deep flutes improve chip evacuation
- Helps reduce slowdowns caused by packed debris in the hole
- Can support more holes per battery charge in cordless use
Quick-Change Setup for Drill Drivers
The long body gives you reach for boring through thicker stock and built-up framing, while the 7/16 in. hex shank makes swaps faster and keeps the bit planted under load.
- 7/16 in. hex quick-change shank
- Compatible with corded and cordless drill drivers and impact drills
- 7/8 in. diameter for larger pass-through holes in wood
What's in the Box
- (1) Diablo DAG3090 7/8 in. x 17-1/2 in. Auger Bit
Key Specifications
| Drill Bit Type | Auger Bit |
|---|---|
| Bit Diameter | 7/8 in. |
| Overall Length | 17-1/2 in. |
| Shank Diameter | 7/16 in. |
| Shank Style | Hex |
| Material Application | Wood, Wood with Nails |
| Piece Count | 1 |
| Made In | Switzerland |
Compatibility
Built For
Pro Tip
Let the Dura-Tip feed the bit instead of leaning hard on the drill. On longer bores, back the bit out once or twice if the hole starts packing with chips. You will keep the cut cooler and the tool from bogging down.
Warranty & Support
Tool Nut's Take
Diablo DAG3090 7/8 in. x 17-1/2 in. Auger Bit That Makes Sense for Rough Work
This is the auger bit you grab when standard wood bits start acting soft the second the job gets ugly.
- Who it's for: Framers, electricians, plumbers, remodelers, and anyone boring larger holes through lumber where nails may be hiding.
- Why it stands out: The self-feeding tip, dual cutting edges, and deep flutes are the right combination for fast wood drilling with better control and chip clearing.
- Worth knowing: This is a single bit, not a set, and it is best matched with a drill driver or impact drill that can properly handle a 7/16 in. hex-shank auger bit.
Common Questions
- What material is this bit made to drill? It is designed for wood and nail-embedded wood.
- What tools can use this auger bit? Diablo states it can be used in corded or cordless drill drivers and impact drills that accept the 7/16 in. hex shank.
- What size hole does it drill? The bit diameter is 7/8 in.
- Is this a set or a single bit? It is an individual auger bit with a piece count of 1.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

