Diablo Carbide Teeth 13-Piece Hole Saw Set for Plumbers (DHS13SPLCT)
Diablo Carbide Teeth 13-Piece Hole Saw Set for Plumbers (DHS13SPLCT)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
Diablo DHS13SPLCT Carbide Teeth 13-Piece Hole Saw Set for Plumbers is a carbide hole saw kit built for plumbers and other tradespeople who need to cut multiple hole sizes in wood, metal, plastic, and mixed materials without switching to a different hole saw style. This is a hole saw set designed for drilling larger diameter holes for plumbing rough-in, pipe pass-throughs, and general trade work. Model Number: DHS13SPLCT.
This set includes eight carbide teeth hole saw cups in plumber-friendly sizes, plus the Snap-Lock Plus mandrel system, a carbide pilot bit, a cobalt pilot bit, and two threaded adaptors. The big advantage here is range. You get sizes from 1-1/8 inch up to 3-5/8 inch in one case, so you can cover common pipe and fitting hole sizes without piecing together separate cups and arbors.
Where this set earns its keep is material flexibility. Diablo states these carbide hole saws can drill clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron, and stainless steel. On the job, that matters because rough-ins rarely give you ideal material conditions. You might start in clean framing lumber, hit a hidden nail, then move to sheet metal or stainless. A set that handles that spread helps keep the truck lighter and the workflow simpler.
The 2-3/8 inch cutting depth is another practical benefit. Deeper cutting means more one-pass holes, which cuts down on backing out, clearing chips, and starting again from the other side. Diablo also calls out up to 40% deeper holes in one pass and increased productivity. For a plumber boring through studs, subfloors, cabinets, or layered material, that extra depth translates directly into less time spent wrestling the hole saw.
The Snap-Lock Plus mandrel system is built around speed. Diablo designed it for quick and easy cup changes, and the one-size-fits-all mandrel system works with Diablo hole saws from 5/8 inch to 6 inch diameter. If you have to jump from a smaller supply line hole to a larger waste line opening, that fast swap matters. Tool-free plug ejection is another jobsite-friendly feature because it helps clear cut plugs faster instead of digging them out by hand.
Diablo also uses a variable tooth design to reduce effort and improve cutting speed in hard materials. That is the kind of feature that sounds small until you are making repeated cuts overhead or in awkward spots. Easier starts, steadier feed, and less fighting the saw are real benefits when you are doing rough-in work all day. The carbide construction is also there for longevity, with Diablo claiming up to 50X longer cutting life than standard options.
This set is made to run in either a drill press or a hand held drill, and it requires a minimum 3/8 inch chuck size. The hex shank helps keep the setup secure under load. That makes the kit practical for both shop use and field use, whether you are on a bench making controlled cuts or working in place inside framed walls and utility chases.
If you are a plumber, remodeler, maintenance tech, or general contractor who regularly cuts large pass-through holes in more than one material, this is the kind of set that makes sense. It is especially strong for users who want one organized kit instead of a pile of loose cups and mismatched arbors. If all you ever cut is soft wood, it is probably more tool than you need. But if your work moves between wood, nails, plastic, and metal, this set is built for exactly that kind of mess.
Built for Fast Rough-In Work
This kit is laid out for tradespeople who need the right size on hand instead of stopping to hunt for parts. The included cups, pilot bits, mandrel, and adaptors give you a ready-to-work setup for common plumbing and general construction hole cutting.
- Includes eight carbide hole saw sizes from 1-1/8 inch to 3-5/8 inch
- Designed for use with a drill press or hand held drill
- Hex shank setup requires a minimum 3/8 inch chuck size
What's in the Box
- (1) 1-1/8 in. carbide hole saw
- (1) 1-3/8 in. carbide hole saw
- (1) 1-1/2 in. carbide hole saw
- (1) 2 in. carbide hole saw
- (1) 2-1/8 in. carbide hole saw
- (1) 2-9/16 in. carbide hole saw
- (1) 2-5/8 in. carbide hole saw
- (1) 3-5/8 in. carbide hole saw
- (1) Snap-Lock Plus mandrel system
- (1) carbide pilot bit
- (1) cobalt pilot bit
- (1) 5/8 in. threaded adaptor for diameters 1-1/4 in. to 6 in.
- (1) 1/2 in. threaded adaptor for diameters 9/16 in. to 3-1/16 in.
Key Specifications
| Bit Material | Carbide |
|---|---|
| Tool Type | Hole Saw Set |
| Piece Count | 13 |
| Cutting Depth | 2-3/8 in. (60 mm) |
| Min Chuck Size Required | 3/8 in. |
| Shank Style | Hex |
| Drill Compatibility | Hand held drill or drill press |
| Material Application | Wood, wood with nails, plastic, aluminum, steel, stainless steel, cast iron, fiberglass, PVC, gypsum, plaster, and sheet metal |
Compatibility
Built For
Tool Nut's Take
One of the smarter hole saw kits for plumbers
The Diablo DHS13SPLCT Carbide Teeth 13-Piece Hole Saw Set for Plumbers makes a lot of sense if your day involves bouncing between wood, nails, plastic, and metal and you do not want separate setups for each one.
- Who it's for: Plumbers, remodelers, and service pros who cut a lot of pass-through holes and need multiple common sizes in one organized kit.
- Why it stands out: The carbide cups cover a wide material range, the 2-3/8 inch cutting depth helps with one-pass holes, and the Snap-Lock Plus mandrel speeds up size changes.
- Worth knowing: This is a set for users who will actually use the full size spread and material capability. If you only cut occasional holes in soft wood, a simpler kit may be enough.
Common Questions
- What materials can this hole saw set cut? Diablo lists clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron, and stainless steel among the supported materials.
- Can this set be used in a hand drill? Yes. It is designed for use with either a hand held drill or a drill press.
- What chuck size is required? The minimum chuck size required is 3/8 inch.
- How deep can it cut? The listed drilling depth is 2-3/8 inches, also stated as 60 mm cutting depth.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

