The Festool D27/22x5m-AS-GQ/CT USA Suction Hose is a tapered dust extraction hose with an integrated Plug It cord and protective sleeve for sanding setups. This is a suction hose designed for dust extraction during sanding. Model Number 201761. If you run Festool sanders and want better hose control, less surface scuffing, and a cleaner path from tool to extractor, this is the hose built for that job.

What makes this hose different is how it combines several jobsite annoyances into one cleaner system. The hose is antistatic, it includes a rotating adapter, and it comes with a reducing sleeve with bayonet fitting. In real use, that means the hose is easier to connect, less likely to twist you up while sanding, and better suited for a controlled dust extraction setup with compatible Festool CT extractors and sanders.

The tapered hose design matters more than it sounds on paper. Tool Nut lists the diameter as tapering from 32 mm to 22 mm, and Festool identifies it as D27/22. That smaller end helps it pair properly with compatible sanders, while the overall setup stays light enough at the tool end to improve handling. When you are sanding for long stretches, especially on horizontal panels or vertical face work, reducing hose bulk at the tool makes the whole setup feel less awkward.

The sleeve is one of the big reasons people step up to this hose. Festool says the protective cover is made from 100% nylon and was developed to improve handling while protecting surfaces. The practical takeaway is simple: a bare ribbed hose can catch on material edges and drag across finished work. This sleeved design glides more easily over corners and benchtops, which helps keep your workflow moving and lowers the chance of marking up sensitive surfaces.

The integrated Plug It cord is another real-world advantage. Instead of managing a separate power cord and hose as two loose lines, this setup keeps them together. That is especially useful when paired with Festool sanders that use the Plug It connection. It cuts down on snag points, keeps the work area tidier, and makes it easier to move around a bench or a large panel without constantly repositioning cords.

Festool also rates this hose as temperature-resistant up to 158 degrees Fahrenheit, or 70 degrees Celsius. That is worth noting for shop use where hoses may see warm environments, extended tool run time, or regular extraction duty. Add in the antistatic construction and smooth outer design, and you get a hose that is clearly aimed at finish-focused sanding rather than generic vacuum duty.

Compatibility is specific and important here. Festool lists this hose as suitable for all sanders with a D 27 hose connection and Plug It connection, as well as CT 15, CT 25, CT MINI and CT MIDI from model year 2019, CTC MINI and CTC MIDI, and CT 26, CT 36, and CT 48 extractors. If you are already in the Festool dust extraction system, this hose makes the most sense as an upgrade for smoother sanding and cleaner tool-to-extractor integration.

Who should buy it? Woodworkers, finish carpenters, cabinet installers, and painters doing fine prep work will get the most out of it. If your sanding work happens on finished parts, edge-banded panels, tabletops, built-ins, or painted surfaces, the sleeve and integrated cord setup are not gimmicks. They solve real handling problems and make the system easier to live with day after day.

Festool D27/22x5m-AS-GQ/CT USA Suction Hose for finish-focused sanding setups

This is the Festool hose you buy when you are tired of a standard hose fighting you every time you sand a panel or edge.

• Who it's for: Festool users doing sanding work in cabinet shops, finish rooms, paint prep, and install work where hose handling actually affects the result.
• Why it stands out: The integrated Plug It cord, sleeved outer cover, tapered diameter, and antistatic design make it a more refined setup than a basic extractor hose.
• Worth knowing: This is a system-driven accessory, so compatibility matters. Make sure your sander has the D 27 hose connection and Plug It setup, and check your extractor model before you buy.

• What is the length of this Festool suction hose? It is 5 m long, which is 16.5 ft.
• Is this hose antistatic? Yes. Festool lists this hose as antistatic.
• What type of tools is it designed for? It is designed for sanding applications and is suitable for Festool sanders with a D 27 hose connection and Plug It connection.
• Which Festool extractors does it fit? Festool lists compatibility with CT 15, CT 25, CT MINI and CT MIDI from model year 2019, CTC MINI and CTC MIDI, and CT 26, CT 36, and CT 48.
• Why does it have a sleeve? The 100% nylon sleeve helps the hose glide over surfaces and edges and protects the integrated cord from damage.