Festool Granat NET Protection Pad for LS 130 / RTS 400 Sanders, 2-Pack (203346)
Festool Granat NET Protection Pad for LS 130 / RTS 400 Sanders, 2-Pack (203346)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
Festool Protection Pad PP-STF 80x133 - 2x is a replacement protection pad for select Festool rectangular sanders. This is a protection pad designed for protecting the sanding pad when using abrasive net. Model Number 203346. If you run Granat Net or other abrasive net sheets and want to keep your sander base from wearing out early, this is the part that does that job.
The point of this accessory is simple: the abrasive net does the sanding, and the protection pad takes the abuse that would otherwise hit the sander's hook and loop face. That matters because once the base starts to wear, sheet hold gets weaker, dust extraction can suffer, and your finish quality usually goes with it. Adding a protection pad is cheaper than replacing the main sanding pad, so this is one of those small parts that saves money the longer you keep the tool in service.
Festool sizes this pad at 3-1/8" x 5-1/4" (80 x 133 mm), with a 1/16" (2 mm) thickness. That size and thickness matter because you want a pad that fits the base correctly without creating a sloppy interface. The hook and loop attachment keeps installation straightforward, and the nylon construction is built for repeated sheet changes and day-to-day sanding work.
The 16-hole layout is just as important as the size. On a dust-extracting sander, hole alignment is what keeps air moving through the abrasive and into the hose instead of packing dust under the sheet. For painters, finish carpenters, cabinet installers, and remodelers working on filler, primer, drywall touch-up, or fine wood prep, good dust flow means cleaner work and less time fighting clogged abrasives.
Compatibility is clear and specific here. The Festool Protection Pad PP-STF 80x133 - 2x fits the RTS 400, RTSC 400, RS 400, RS 4, and LS 130. If that is your platform, this is the right style of protection pad to keep on hand in the truck or shop. It is sold as a 2-pack, which makes sense because these are wear items and most users would rather replace them immediately than stop work and wait on parts.
This is not the flashy purchase in your sanding setup, but it is a smart one. If you use abrasive net regularly, the protection pad helps preserve the hook surface on the tool's base and maintains a better connection between the sander and abrasive. For anyone trying to stretch tool life, keep dust collection working properly, and avoid unnecessary downtime, this accessory earns its place pretty quickly.
Save the Sander Base for the Work That Matters
This pad is there to take the wear instead of your sander's main backing pad. If you use abrasive net often, that small layer can help extend the life of the base and keep the hook surface holding like it should.
- Built for protecting the sanding pad when using abrasive net
- Hook and loop attachment installs fast and removes cleanly
- Nylon construction is meant for repeated use as a wear layer
Keep Dust Extraction Working Like It Should
Dust control on a finishing sander depends on the whole stack lining up correctly. The 16-hole pattern helps maintain airflow through the sheet and into the extractor, which means less clogging and a cleaner sanding pass.
- 16 dust collection intake holes
- Made for 3-1/8" x 5-1/4" (80 x 133 mm) rectangular sanding setups
- Useful for finish prep, filler sanding, and surface prep where dust matters
Right Fit for Specific Festool Sanders
Accessories only help if they fit right the first time. This pad is made for a defined group of Festool sanders, so you are not guessing about size, hole layout, or attachment style.
- Fits RTS 400, RTSC 400, RS 400, RS 4, and LS 130
- Dimensions: 3-1/8" x 5-1/4" x 1/16" (80 x 133 x 2 mm)
- Sold as a package of 2 protection pads
What's in the Box
- (2) Festool Protection Pads
Key Specifications
|
|
Protection pad |
|---|---|
|
|
3-1/8" x 5-1/4" x 1/16" (80 x 133 x 2 mm) |
|
|
Nylon |
|
|
Hook and Loop |
|
|
16 |
|
|
2 pads |
|
|
Germany |
Compatibility
Built For
Pro Tip
If you switch to abrasive net for fine finish work, add this pad before the first sheet goes on, not after the base starts wearing. It is a cheap wear part, and replacing that is a lot better than replacing the sander's main backing pad.
Tool Nut's Take
Festool Protection Pad PP-STF 80x133 - 2x Is the Smart Little Part That Saves the Expensive One
If you run abrasive net on your rectangular Festool sander, this is one of those low-cost accessories that quietly saves your setup from premature wear.
- Who it's for: Festool users running RTS 400, RTSC 400, RS 400, RS 4, or LS 130 sanders for finish prep, patch work, and surface sanding.
- Why it stands out: It protects the hook and loop face on the main sanding pad, keeps the stack working correctly, and preserves dust extraction with the 16-hole pattern.
- Worth knowing: This is not a performance upgrade by itself. It is a wear saver. If you use abrasive net regularly, though, it is money well spent.
Common Questions
- What is this accessory used for? It is used to protect the sanding pad when using abrasive net on compatible Festool sanders.
- Which sanders does it fit? It fits the Festool RTS 400, RTSC 400, RS 400, RS 4, and LS 130.
- How does it attach? It uses a hook and loop attachment method.
- What size is it? The pad measures 3-1/8" x 5-1/4" x 1/16" (80 x 133 x 2 mm)

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

