Festool 204046 STL 450/AD ST DUO Inspection Light (201938-201936)
Festool 204046 STL 450/AD ST DUO Inspection Light (201938-201936)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 204046 STL 450/AD ST DUO Inspection Light is a set that pairs the SYSLITE STL 450 surface inspection light with the AD-ST DUO 200 tripod adapter. This is a surface inspection light designed for revealing defects in drywall, paint, wood finishes, and other large flat surfaces, with the hardware to mount it hands-free. Model Number 204046 is aimed at drywall finishers, painters, cabinet and furniture finishers, and remodelers whose work is judged by how the surface looks under raking light.
The light itself is the Festool 201938 SYSLITE STL 450. Festool rates it at 1,200 lumens with a 5,000 K color temperature, spread evenly across a 25" wide pattern. The neutral, daylight-like color keeps paint and stain from looking warmer than they are, and the wide spread lets you read a big section of wall or tabletop in one pass instead of chasing a small hot spot.
Brightness is only half the story. The STL 450 has a long, low-profile body built to sit close to the surface, which puts the light at a grazing angle. That low angle is what makes joint lines, trowel marks, sanding swirls, and waves cast a shadow you can see. A ceiling fixture or a general work light floods the surface from the front and hides those same defects until the sun comes through the window after the job is done.
Festool built the light for finish work. The full-body shell is non-marring and impact resistant, so bumping it against a freshly painted wall or a finished door is not a problem. An IP 55 rating protects it against dust and water spray, which matters when the light lives in a cloud of joint compound dust. It runs on 120 VAC through a 16.4 ft (5 m) cord, so output stays constant through a long inspection session with no batteries to swap.
The AD-ST DUO 200 adapter is what makes this set different from the light alone. It is a steel, spring-loaded mount that connects the STL 450 to the Festool ST DUO 200 tripod with infinite angle adjustment. Lock the light in position along a wall, step back, and look at the surface from the same angle the client will. Your hands stay free for marking, sanding, or touching up. The adapter is also sold on its own as the Festool 201936 tripod adapter.
Who should buy it? Drywall crews doing Level 5 finishes, painters who want to stop callbacks, cabinet and furniture finishers checking sprayed surfaces, and remodelers handing over high-end work. If you already own the ST DUO 200 tripod, or plan to, this set is the most complete way to get into Festool's inspection lighting. If you need to flood a whole room with light, a site light is the better tool.
Raking Light Shows the Truth
Defects on a flat surface are hard to see head-on. Held low and close, the STL 450 throws a long shadow off every ridge and dip, so problems are obvious while they are still easy to fix.
- 1,200 lumens at 5,000 K
- Even 25" light spread
- Low-profile body keeps the light close to the surface
Set It and Step Back
Mounted on a tripod with the included adapter, the light holds a fixed angle while you walk the wall. Repeating the same setup on every room gives you a consistent standard for what passes. The adapter fits the Festool 200038 ST DUO 200 tripod, which is sold separately.
- AD-ST DUO 200 adapter with infinite angle adjustment
- Steel construction with spring-loaded attachment
What's in the Box
- (1) Festool SYSLITE STL 450 Surface Inspection Light (201938)
- (1) Festool AD-ST DUO 200 Tripod Adapter (201936)
Tripod not included.
Key Specifications
|
|
1,200 lumens |
|---|---|
|
|
5,000 K |
|
|
25" |
|
|
IP 55 |
|
|
120 VAC corded |
|
|
16.4 ft (5 m) |
|
|
3.31 lbs (1.5 kg) |
|
|
2.43 lbs (1.1 kg) |
Compatibility
Built For
Pro Tip
Inspect a wall twice, once with the light running parallel to the wall from the left and once from the right. A ridge that hides from one side casts a clear shadow from the other.
Warranty & Support
Tool Nut's Take
The Festool 204046 STL 450/AD ST DUO Inspection Light Pays for Itself the First Time It Saves a Repaint
A purpose-built inspection light plus the mount to use it hands-free, in one box.
- Who it's for: Drywall finishers, painters, finishers, and remodelers whose work gets judged in raking light.
- Why it stands out: The low-profile 1,200-lumen, 5,000 K light reveals defects general work lights wash out, and the included adapter turns it into a fixed inspection station.
- Worth knowing: The tripod is not included. This is an inspection light, not an area light, and it needs an outlet. For broad cordless area lighting, a site light such as the Festool 578126 SYSLITE KBS C is the right tool.
Common Questions
- Does this set include the tripod? No. It includes the STL 450 light and the AD-ST DUO 200 adapter. The ST DUO 200 tripod is sold separately.
- Is the STL 450 battery powered? No. It runs on 120 VAC through a 16.4 ft (5 m) cord.
- Can it be used handheld? Yes. Festool designed it for handheld or hands-free use.
- Will it hold up to jobsite dust? Yes. It carries an IP 55 rating against dust and water intrusion.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


