Festool 204259 Jigsaw Blades S 75/2.5 R Down-Cut 5-Pack is a wood-cutting jigsaw blade set built for clean, fine cuts in wood. This is a jigsaw blade designed for splinter-free fine cutting in wooden materials. Model Number 204259. If you are trimming visible surfaces, cutting finished plywood, or making curved cuts where tear-out matters, this blade is aimed right at that job.

The big story here is the down-cut tooth pattern. Festool uses reverse toothing and a conically sanded blade shape so the blade cuts on the down stroke, helping leave the top surface cleaner than a standard up-cut wood blade. In practical terms, that means less cleanup on veneered stock, better-looking cuts on finished faces, and less time fussing with painter's tape or sacrificial backing when the material is thin enough for this blade's range.

The blade itself is made from high-grade HCS, or high carbon steel, which is the right material choice for wood-focused jigsaw work. It is not trying to be an all-material blade. It is meant to do one job well: fine wood cutting. The 3 inch blade length with 10 teeth per inch and a 1/8" (2.5 mm) pitch gives you a balanced setup for controlled cuts in wood where finish quality matters more than brute-force speed.

Festool rates the maximum workpiece thickness at 1-3/16" (30 mm). That makes this blade a good match for sheet goods, finish panels, thinner hardwood and softwood stock, and detail work that benefits from a cleaner top edge. If you regularly cut thicker framing lumber, this is not the blade you reach for first. If you care about a cleaner cut line in thinner wood, it makes a lot more sense.

Fitment is another strong point. The S 75/2.5 R is suitable for Festool PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, and PSBC 420 jigsaws. Supplementary data also identifies it as a T-shank jigsaw blade, which is the common professional interface. For Festool users, the main takeaway is simple: if you are running one of the listed saws and need a finer wood-cutting blade, this one is built for that setup.

Who should buy it? Cabinet installers, trim carpenters, woodworkers, remodelers, and serious DIY users who want cleaner cuts in visible wood surfaces. The Festool 204259 Jigsaw Blades S 75/2.5 R Down-Cut 5-Pack is not the general-purpose blade you leave in the saw for every task. It is the one you keep on hand for the cuts that need to look right the first time.

Festool 204259 Jigsaw Blades S 75/2.5 R Down-Cut 5-Pack for cleaner-looking wood cuts

This is the blade you buy when the cut edge matters more than raw speed.

• Who it's for: Woodworkers, trim crews, cabinet installers, and DIY users cutting visible wood surfaces with a Festool jigsaw.
• Why it stands out: The reverse-tooth down-cut design is the whole point here. It helps keep the top face cleaner, which is exactly what you want on finish material.
• Worth knowing: This is a specialty wood blade with a 1-3/16" (30 mm) max thickness rating. Great choice for clean finish work, not the blade you leave in for every rough cut on the job.

• What material is this blade designed for? It is designed for wood cutting and is described as a wood fine-cut jigsaw blade made from high carbon steel.
• What makes this blade different from a standard wood blade? It uses reverse toothing for down-cut action, which helps reduce splintering and improve the top-edge finish in wood.
• What is the maximum recommended workpiece thickness? Festool lists a maximum workpiece thickness of 1-3/16" (30 mm).
• Which Festool jigsaws is it suitable for? It is suitable for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, and PSBC 420 models.