The Festool 205772 WOOD FINE CUT HW 168x1,8x20 WD42 Saw Blade is a 168 mm fine-cut circular saw blade built for clean crosscuts in wood and sheet goods. This is a saw blade designed for fine finish cutting in solid wood, veneered panels, and coated panels. If you are using a Festool plunge saw or compact table saw for finish work, this blade is aimed at getting cleaner edges straight off the cut. Model Number: 205772.

What matters here is not just the tooth count, but how the blade is tuned for the job. Festool pairs a 42-tooth layout with a blended tooth geometry that combines alternate-top-bevel cutting action with a raker style profile for a balance of smooth cut quality and durability. In practical terms, that means cleaner crosscuts and less splintering on visible surfaces, especially when you are working with finished sheet goods where chip-out is a problem you notice immediately.

The thin kerf design helps the blade move through material with less resistance. That is a real benefit on the job because a lower-resistance cut tracks easier, runs smoother, and helps maintain speed without feeling like the saw is fighting the material. Festool also uses high-quality steel with fine-grain carbide teeth, which is a big part of why this blade is intended for repeatable finish work rather than rough cutting.

Size and fit are straightforward but important. This blade measures 6.61 inches in diameter with a 20 mm arbor hole, a 0.07 inch cutting width, and a 0.05 inch standard blade thickness. Those numbers tell you this is a purpose-built fine-cut blade for specific Festool platforms, not a generic framing blade. The 10 degree chip angle and 15 degree relief angle support the clean-cutting behavior this blade is built around.

Where this blade really earns its keep is in cabinet parts, furniture components, kitchen installations, and panel cutting where the finished edge matters. If you are cutting veneered material, coated panels, or solid wood crosscuts, a blade like this can save time by reducing cleanup, sanding, and edge correction after the cut. That matters even more when you are working with visible finished surfaces or prefinished stock.

System compatibility is a major part of the story. The Festool 205772 WOOD FINE CUT HW 168x1,8x20 WD42 Saw Blade is suitable for the Festool TS 60 K, TSV 60 K, and CSC SYS 50. Festool specifically notes that the cutting angle and tooth shape are adapted to the machine and application. That machine-to-blade matching is one reason Festool blades tend to perform best when used in the system they were designed for.

This blade makes the most sense for woodworkers, cabinet installers, finish carpenters, and serious DIY users who care more about cut quality than brute-force stock removal. If your work involves exposed edges, expensive panels, or repeat cuts that need to look right the first time, this is the right kind of blade. If you are just rough-cutting framing lumber, it is more blade than that job requires.

Festool 205772 WOOD FINE CUT HW 168x1,8x20 WD42 Saw Blade for Finish-First Work

This is the blade you buy when the cut edge matters more than just getting through the material.

• Who it's for: Cabinet installers, woodworkers, finish carpenters, and anyone cutting veneered or coated panels on Festool's 168 mm saw platform.
• Why it stands out: The 42-tooth fine-cut setup, thin kerf, and machine-matched geometry are all aimed at cleaner results with less tear-out.
• Worth knowing: This is a purpose-built fine-cut blade, not a general demolition or rough framing blade. Use it where finish quality pays you back.

• What type of cutting is this blade designed for? It is designed for clean, splinter-free crosscuts in solid wood, coated panels, veneered panels, and similar sheet goods.
• Which saws fit this blade? Festool lists this blade as suitable for the TS 60 K, TSV 60 K, and CSC SYS 50.
• What is the blade size? The blade diameter is 6.61 inches (168 mm) with a 0.79 inch (20 mm) arbor hole.
• How many teeth does it have? This blade has 42 teeth.