Festool 494465 1/2 In. Clamping Collet with Nut is a router collet accessory made for specific Festool routers. This is a router collet designed for securely holding 1/2 inch router bits during routing work. Model Number 494465 fits users who need the correct collet and nut setup for reliable bit retention, easier bit changes, and more consistent cutting performance.

If you are running larger profile bits, straight bits, or other 1/2 inch shank router bits, the collet matters more than most people think. A worn or incorrect collet can let the bit creep, slip, or run off center. Festool calls out this collet for dramatically reducing bit slipping and maintaining the center line of the bit, which directly helps with cut quality and repeatability.

This Festool router accessory is built as a dustproof clamping collet and includes the matching nut. That matters because the collet and nut work together as a system. When both pieces are matched correctly, you get more dependable clamping pressure and a more straightforward install than trying to piece together mismatched parts.

One practical advantage here is faster and easier bit changes with one wrench. On a busy bench or jobsite setup, that saves time every time you switch from one cutter profile to another. It is a small upgrade on paper, but anyone who changes bits often will appreciate a setup that makes the process cleaner and less frustrating.

Compatibility is the big thing to check before you buy. This collet is suitable for the Festool OF 1400, OF 2000, and OF 2200, with a 24 millimeter open-ended spanner width noted for the OF 2000 and OF 2200. If you already own one of those routers and need a 1/2 inch collet with nut, this is the direct-fit solution to keep your router set up correctly for 1/2 inch shank bits.

For users who care about precision routing, this is not just a replacement part. It is one of those accessory pieces that has a real effect on how the tool performs. Better grip on the bit means less chance of movement under load, better alignment over the life of the collet, and more confidence when making finish passes, edge profiles, or repeated cuts in hardwood and sheet goods.

The Festool 494465 1/2 In. Clamping Collet with Nut makes the most sense for woodworkers, cabinet installers, trim carpenters, and serious DIY users who already own a compatible Festool router and want to run 1/2 inch router bits the right way. If your work depends on clean routing and secure bit holding, this is the correct accessory, not a place to improvise.

Festool 494465 1/2 In. Clamping Collet with Nut Keeps Your Router Honest

This is the right buy for anyone running 1/2 inch router bits in a compatible Festool router and wanting a secure, precise setup instead of fighting bit movement.

• Who it's for: Woodworkers, trim guys, cabinet installers, and Festool router owners using OF 1400, OF 2000, or OF 2200 models.
• Why it stands out: It is built to reduce bit slipping, maintain better centering, and make bit changes easier with a one-wrench setup.
• Worth knowing: This is a router accessory, not a universal collet. Check your router model and make sure you need a 1/2 inch shank capacity before ordering.

• What kind of tool is this? This is a router collet with nut for holding 1/2 inch shank router bits in compatible Festool routers.
• Which Festool routers does it fit? It is compatible with the Festool OF 1400, OF 2000, and OF 2200.
• What bit shank size does it accept? It is designed for router bits with a 1/2 inch shank diameter.
• Why would I replace or add a dedicated collet? A correct collet helps reduce bit slipping and maintain better bit centering, which supports cleaner and more precise routing results.