The Festool Granat 80 x 133 mm P80 - 10x is a sheet sanding abrasive pack for finish prep, surface leveling, and general-purpose sanding across multiple materials. This is a sheet sanding abrasive designed for stock removal and surface preparation. Model number 497128. If you run a Festool linear sander or sheet sander and want one abrasive that can handle wood, coatings, plastics, and solid surface without constant swapping between specialty papers, this is the kind of consumable that earns its keep.

What makes Granat stand out is that it is not just aimed at raw wood. Festool lists it for bare wood, most modern paint systems, clear coats, acrylics, plastics, solid surface, scratch-resistant coatings, and high-VOC coatings. That matters because a lot of sandpaper works fine on one surface and loads up fast on another. Here, the premium abrasive blend and stearate coating are meant to resist clogging and smearing, which helps the sheet keep cutting longer and leaves a more consistent scratch pattern.

The P80 grit puts this sheet in the coarse-prep range. It is a practical choice when you need to knock down material, level a surface, remove finish, or get a workpiece ready for the next sanding step. On the job, that means you can move through early prep work efficiently instead of burning time with a grit that is too fine to make progress. Festool also positions the Granat line as a full sanding solution, so this sheet fits naturally into a process that starts with heavier removal and moves toward finer finish sanding.

Construction matters with abrasives, and the details here are worth paying attention to. These sheets use a paper backing with hardened aluminum oxide and ceramic grit, plus an open abrasive grain coat. In plain terms, that combination is built to stay aggressive while reducing the tendency to gum up when you are sanding coated materials. Less loading usually means fewer sheet changes, more even results, and less rework because the abrasive keeps cutting instead of rubbing heat into the surface.

Fit and attachment are straightforward. The 80 x 133 mm format is made for Festool LS 130 and Festool RTS 400 sanders, and the hook and loop attachment makes changes quick. That is a small thing until you are bouncing between sanding stages or changing out loaded sheets during prep work. Fast changes keep your workflow moving and make it more likely you will switch grits when you should, instead of trying to squeeze too much life out of a worn sheet.

This Festool sanding sheet is a strong match for woodworkers, painters, finish carpenters, remodelers, and solid-surface fabricators who need one abrasive that can cover a wide material range. If you are using compatible Festool sanders and you care about cut quality, sheet life, and predictable performance on modern coatings, the Festool Granat 80 x 133 mm P80 - 10x is a smart consumable to keep on hand.

Festool Granat 80 x 133 mm P80 - 10x is the kind of abrasive you buy when cheap paper has already wasted enough of your time

This is a versatile Festool sanding sheet pack that makes sense for users who bounce between raw wood, painted surfaces, and modern coatings and want one abrasive that keeps cutting.

• Who it's for: Festool LS 130 and RTS 400 users doing prep work, finish removal, leveling, and early sanding steps on mixed materials.
• Why it stands out: Wide material range, clog-resistant design, and quick hook and loop changes make it more useful than a one-surface-only abrasive.
• Worth knowing: This is a P80 sheet, so it is meant for more aggressive sanding and prep work, not final finish sanding.

• What sanders is this abrasive compatible with? Festool lists it as compatible with the LS 130 linear sander and the RTS 400 sander.
• What materials can this sanding sheet be used on? It is designed for bare wood, most modern paint systems, clear coats, acrylics, plastics, solid surface, scratch-resistant coatings, and high-VOC coatings.
• Is this a hook and loop sanding sheet? Yes. It uses a hook and loop attachment method for quick changes.
• What kind of sanding is P80 best for? P80 is a coarse grit typically used for stock removal, stripping, leveling, and surface prep before moving to finer grits.