The Festool 499800 Chamfer Router Bit is a carbide chamfer cutter made for routing clean beveled edges in wood-based materials. This is a chamfer router bit designed for edge profiling and bevel work. Model Number 499800. If you are using a Festool edge router or compact router for trim, cabinetry, or finish detail, this bit gives you a fixed 30 degree chamfer profile with a 1 inch cutter diameter.

What matters here is control. The 30 degree angle is a practical profile for softening sharp edges without making the part look overworked. With a 3/8 inch cutting length and 1 inch diameter, this bit is sized well for common edge treatment on shelves, panels, trim stock, and furniture parts. It is not trying to be an all-purpose profile bit. It is built to do one job cleanly and predictably.

Festool lists this cutter as HW, which identifies it as a carbide-tipped cutting solution, and the web data also identifies carbide material. That is what you want for longer life and cleaner routing when you are doing repeated passes. On real work, that means less time swapping bits and more confidence that the profile will stay consistent from the first piece to the last.

One of the more useful details on this cutter is the optimized bearing mount. Festool specifies that it is suitable for use with a 1/4 inch ball bearing guide or with no ball bearing guide. That gives you flexibility depending on how you want to reference the edge and how the profile needs to break on the workpiece. For edge routing, small details like that make setup easier and help the bit fit the job instead of forcing the job to fit the bit.

This bit is suitable for Festool OF 1010, OF 1010 R, and MFK 700 routers. That compatibility matters because these are the kinds of routers commonly used for trim, laminate, edge finishing, and lighter profile work where balance and clean handling count. If you already run one of those routers, this bit drops into the workflow without guesswork about intended use.

The Festool 499800 Chamfer Router Bit makes the most sense for cabinet installers, finish carpenters, furniture builders, and serious DIY users who care about edge quality. If you need a dedicated chamfer cutter for repeatable bevels instead of a general-purpose bit assortment, this is the kind of purpose-built accessory worth buying once and keeping in the router case.

Festool 499800 Chamfer Router Bit for clean, repeatable bevel work

This is a purpose-built edge profiling bit for users who want a clean 30 degree chamfer without messing around with generic mixed-bit sets.

• Who it's for: Festool router users doing cabinetry, trim, furniture, and finish work where edge quality actually matters.
• Why it stands out: The dedicated 30 degree profile, carbide construction, and flexible bearing-mount setup make it a straightforward bit for repeatable bevels.
• Worth knowing: This is a specialized chamfer cutter, not a multi-profile bit. If 30 degrees is the edge you need, it is a smart buy. If you need a range of profiles, you will want additional bits.

• What routers is this bit suitable for? Festool lists it as suitable for the OF 1010, OF 1010 R, and MFK 700.
• What chamfer angle does it cut? It is specified with a 30° angle.
• What is the cutter diameter? The cutter diameter is 1 in. (25 mm).
• Can it be used with a bearing guide? Yes. Festool states the bearing mount is suitable for a 1/4 in. ball bearing guide or for use without a ball bearing guide.