The Festool 577616 QUADRIVE TPC 18/4 Cordless Hammer Drill and TID 18 Cordless Impact Screwdriver Combo Kit w/ Systainer3 is a two-tool cordless fastening and drilling kit built for tradespeople who need one setup that can handle pilot holes, large fasteners, self-tapping screws, and occasional masonry drilling. This is a cordless impact driver and hammer drill combo kit designed for drilling, driving, and fastening across wood, metal, and masonry. Model Number: 577616.

What makes this kit useful is that the tools are not trying to do the same job. The TID 18 impact driver is there for fastener work, especially when you want strong driving performance without the back-torque that can beat up your wrist. Festool calls out its kickback-free hammer mechanism, which means the fastener gets the force instead of the tool trying to twist out of your hand. On the other side, the TPC 18/4 QUADRIVE handles drilling, screwdriving, and hammer drilling, with four mechanical gears that let you match speed and torque to the task instead of forcing one compromise setting to cover everything.

The numbers and features here matter because they solve real jobsite problems. Festool states the QUADRIVE delivers up to 442.5 in-lbs of torque in first gear for demanding screwdriving, while fourth gear reaches 3600 RPM for fast drilling with small and medium bits. That spread gives the drill a much wider working range than a basic two-speed drill. The TID 18 adds three speed levels plus a dedicated T mode for self-tapping screws, which automatically adapts speed when working through sheet metal into wood. If you do install work, framing hardware, metal connectors, or general punch-list fastening, that kind of control keeps you from snapping heads, stripping threads, or burning time feathering the trigger.

Festool also built this combo around compact handling. The TID 18 is described as ergonomic and compact for accurate work in hard-to-reach areas, and the listed bare-tool weight of 1.98 lbs keeps it manageable for extended use. That matters overhead, inside cabinets, between studs, and in roof framing where a bulky tool gets old fast. The integrated LED light, side-mount belt clips, and onboard bit storage are not flashy features, but they are the kind of details you appreciate after a full day moving from ladder work to floor work and back again.

The drill side is where the system depth really shows up. The TPC 18/4 uses Festool's FastFix interface, which lets you switch attachments without tools for drilling, screwdriving, angle drilling, and angle driving. In this kit you get a keyless chuck, an angle attachment, and an auxiliary handle. That gives the hammer drill a wider working range right out of the box. Tight corner? Use the angle attachment. Need better control on a larger bit or more aggressive drilling? Add the side handle. Working across wood, metal, and masonry in the same day? This setup is built for that kind of mixed work.

Battery and storage system compatibility are part of the value here too. The kit runs on Festool's 18V platform and includes (2) 4.0Ah HighPower battery packs and a TCL 6 rapid charger, so this is not a bare-tool starter. Festool also lists Bluetooth technology in the technical data. Everything packs into a Systainer, which is a real advantage if you already use Festool storage, carts, mobile workstations, or dust extractors that tie into the Systainer ecosystem. It keeps the whole kit together instead of turning into two loose tools, a charger, and a pile of attachments rolling around in the truck.

Who is this for? Contractors, remodelers, carpenters, installers, and serious DIY users who want a premium drilling and fastening setup instead of piecing one together tool by tool. If you mostly run screws all day, the TID 18 gives you the dedicated impact driver you want. If you drill wood, metal, and sometimes masonry, the TPC 18/4 gives you a much broader range than a basic drill/driver. And if you already buy into the Festool system, this kit makes even more sense because the tools, batteries, attachments, and Systainer storage all work like part of one platform instead of separate purchases that happen to share a charger.

Festool 577616 QUADRIVE TPC 18/4 Cordless Hammer Drill and TID 18 Cordless Impact Screwdriver Combo Kit w/ Systainer3 is the right kind of two-tool kit

This setup makes sense because each tool has a clear job, and both are strong enough that you will actually reach for them every day.

• Who it's for: Pros and serious users who want a premium impact driver for fastening and a real hammer drill for drilling and mixed-material work.
• Why it stands out: The TID 18 keeps driving work compact and controlled, while the QUADRIVE's four gears and FastFix system give the drill way more range than a basic combo-kit drill.
• Worth knowing: This is a system-minded Festool kit, so it makes even more sense if you already use Systainers and 18V Festool cordless tools.

• Is this a bare-tool combo kit? No. It includes two 4.0Ah HighPower batteries, a TCL 6 rapid charger, and Systainer storage.
• Can the drill handle masonry? Yes. The TPC 18/4 includes a hammer function that can be activated for drilling into masonry.
• What makes the impact driver different from using the drill for driving screws? The TID 18 is built specifically for fastening, with a kickback-free hammer mechanism, three speed levels, and T mode for self-tapping screws.
• Does the drill support attachment changes without tools? Yes. Festool lists a FastFix interface for tool-free conversion between drilling and screwdriving setups, including angle work.