The Festool 583290 LR 32 Hole Drilling Set is a router accessory set for cabinet and furniture hole line drilling. This is a hole drilling set designed for drilling precise 32 mm system rows in shelves, cabinet sides, and hardware layouts. Model Number 583290. If you build cabinets, closets, or shop furniture and want repeatable shelf pin holes without spending half the job on layout, this set is the part of the Festool LR 32 system that makes that happen.

What matters here is not just that it drills holes, but that it helps drill the same hole pattern over and over with consistent spacing and edge offset. Used with a Festool hole line guide rail and a compatible router, the system indexes along the rail so you can produce shelf support holes, rear wall support holes, and fitting locations on a true 32 mm pattern. The stated hole spacing is 32 mm, and the system is used for 3 mm or 5 mm hole diameters, which covers common cabinet drilling work.

The set includes the core hardware that controls alignment and repeatability: a guide plate, centering mandrel, longitudinal or linear stops, and edge stops. The centering mandrel matters because it helps center the router on the guide plate correctly. That sounds small, but it is what keeps your bit tracking where it should on the guide system. The stops matter just as much because they let you register from the workpiece edge and hold a parallel offset instead of free-handing measurements from panel to panel.

Festool also built adjustment into the guide plate to reduce play between the plate and the rail. In plain terms, you can tune out slop so the router carriage moves cleanly without wandering. That is the kind of detail that matters when you are drilling a long run of shelf pin holes and want the last hole to be as trustworthy as the first one. The spring-loaded positioning rocker used with the LR 32 setup is there to speed indexing between holes, which is a big time saver when you are producing multiple cabinet parts.

On the bench or in the field, this system is about getting away from homemade templates and layout guesswork. If you already use Festool guide rails and plunge routers, the LR 32 setup gives you a more controlled way to handle cabinet drilling and fitting preparation. It is especially useful when you need hole lines that match across left and right cabinet sides, tall pantry panels, or multiple shelves in a run where any small layout error becomes obvious fast.

Compatibility is the big buying point, so it is worth being direct: this set is intended for use with the Festool FS-LR32 hole drilling system and is listed for use with Festool OF 1010 and OF 1400 plunge routers. It is also for use with hole line guide rails, and the guide rail is sold separately. Bits are sold separately too. That means this is not a standalone drilling solution out of the box. It is the precision guiding package for users already building around the Festool cabinet drilling platform.

Who should buy it? Cabinet installers, closet builders, finish carpenters doing built-ins, and woodworkers who want clean system-based hole drilling without shop-made jigs. If you are only drilling the occasional shelf pin hole, this is probably more system than you need. But if you do repeat cabinet work and want speed, alignment, and predictable results, the Festool 583290 LR 32 Hole Drilling Set is the right kind of accessory because it removes a lot of the tedious layout work that slows good shops down.

Festool 583290 LR 32 Hole Drilling Set for cabinet work that needs to match

This is a smart buy for anyone already in the Festool router and rail system who wants cleaner, faster cabinet drilling without fooling around with homemade templates.

• Who it's for: Cabinetmakers, closet installers, built-in specialists, and woodworkers doing repeat shelf pin and hardware layout.
• Why it stands out: The value is in repeatability. The guide plate, centering mandrel, and stops turn a compatible router into a more controlled 32 mm line-boring setup.
• Worth knowing: This is not the whole system by itself. You still need the matching hole line guide rail, and the guide rail and bits are sold separately.

• What is this set used for? It is used for drilling 32 mm hole series and fitting holes in shelves, cabinets, and furniture components.
• Which routers does it fit? Based on the primary product data provided, it is compatible with Festool OF 1010 and OF 1400 plunge routers.
• Does this include the guide rail? No. The guide rail is sold separately.
• Are router bits included? No. Bits are sold separately.