Festool 769067-1/2-in. FastFix Keyless Chuck (769067)
Festool 769067-1/2-in. FastFix Keyless Chuck (769067)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 769067 1/2" FastFix Keyless Chuck is a replacement drill chuck for Festool drills that use the FastFix tool interface. This is a keyless chuck designed for drilling and bit retention across a wide range of drilling applications. Model Number: 769067. If you need to replace a worn chuck or want a standard keyed-free setup for everyday drilling, this is the direct, practical solution.
Its clamping range runs from 1/16" (1.5 mm) to 1/2" (13 mm), which gives it real flexibility on the job. That range covers common small-diameter drill bits for finish work and pilot holes, while still accepting larger bits for heavier-duty drilling. For users running one drill across wood, metal, and occasional masonry work, that wider range matters because it reduces setup changes.
Festool builds this chuck around its FastFix holder, so installation and removal are straightforward on compatible tools. That is a big part of why Festool drill users like this system in the first place. You are not fighting with adapters or trying to make a generic chuck fit where it should not. It is made to work with the platform the way Festool intended.
The keyless design keeps things simple. You can tighten and loosen bits by hand, which is faster than hunting down a chuck key and easier when you are moving through repeated bit changes. The ratcheting sleeve helps increase retention, and the locking design helps prevent accidental bit release. In real use, that means more confidence when the bit starts to load up in denser material.
This chuck is also built with an impact-resistant design for use with masonry drills, so it is not limited to light-duty work. The gripping surface is made from plastic, which gives you a more comfortable hold when tightening by hand, while the overall construction is meant for the kind of repeated use a Festool drill sees on site or in the shop.
Compatibility is where you need to pay attention. Festool lists this chuck as suitable for all Festool cordless drills, cordless percussion drills, drills, and percussion drills with FastFix tool reception, except DR 20 and DRP 20. It is also described as a standard replacement chuck for the PDC drill and compatible with Festool C and T drills. If you are already in the Festool drill platform and your tool uses FastFix, this is the straightforward replacement or upgrade path.
Who should buy it? Festool owners who want a genuine replacement chuck, contractors who need dependable bit holding without a keyed chuck, and serious DIY users who want their compatible drill back to factory-style performance. If your current chuck is slipping, worn, or just not holding like it used to, replacing it with the correct Festool keyless chuck is the smarter move than trying to force a universal alternative.
Fast Changes Without Giving Up Holding Power
A good chuck does two jobs: it makes bit changes quick, and it keeps the bit planted once the work starts. This one is built to do both for compatible Festool drills.
- FastFix interface for quick installation on compatible Festool tools
- Locking design and ratcheting sleeve help reduce bit loosening under load
- Impact-resistant build supports use with masonry drill bits
What's in the Box
- (1) Festool KC 13-1/2-K-FFP Keyless Chuck
Key Specifications
| Chuck Type | Keyless |
|---|---|
| Holder | FastFix |
| Clamping Range | 1/16" (1.5 mm) to 1/2" (13 mm) |
| Chuck Size | 1/2 in |
| Material | Plastic / Metal |
| Length | 3.6 in |
| Weight | 0.7 lbs |
| Made In | Germany |
Compatibility
Built For
Pro Tip
If your compatible Festool drill starts slipping bits, check the chuck before blaming the tool. Swapping in a fresh FastFix keyless chuck is often the quickest way to restore solid bit grip and cleaner drilling performance.
Tool Nut's Take
Festool 769067 1/2" FastFix Keyless Chuck Keeps Your Drill Useful
This is the right buy for Festool users who want a genuine replacement chuck that changes fast, grips well, and matches the FastFix system correctly.
- Who it's for: Festool drill owners replacing a worn chuck or setting up a compatible C, T, or PDC drill for everyday drilling work.
- Why it stands out: You get the FastFix connection, a full 1/2 inch capacity, and a locking keyless design instead of a generic fit that may or may not hold properly.
- Worth knowing: This is a system-specific accessory, so compatibility matters. Make sure your drill uses FastFix and note that DR 20 and DRP 20 are excluded.
Common Questions
- What type of chuck is this? It is a keyless chuck with a FastFix holder for compatible Festool drills.
- What bit size range does it accept? The clamping range is 1/16" (1.5 mm) to 1/2" (13 mm).
- Will it fit every Festool drill? No. It is for Festool tools with FastFix tool reception and is specifically excluded for DR 20 and DRP 20.
- Can it be used with masonry drill bits? Yes. Festool describes the chuck as impact-resistant for use with masonry drills.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

