Festool 9-in. Corded Long-Reach Drywall Sander PLANEX EASY LHS-E 225 EQ-CB (578408)
Festool 9-in. Corded Long-Reach Drywall Sander PLANEX EASY LHS-E 225 EQ-CB (578408)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 9-in. Corded Long-Reach Drywall Sander PLANEX EASY LHS-E 225 EQ-CB (578408) is a single-piece corded wall and ceiling sander for drywall finishers, painters, and remodeling contractors. This is a long-reach drywall sander designed for sanding joint compound, skim coats, and patches on walls and ceilings. Model Number 578408 runs 9" (225 mm) abrasive discs on an 8-7/16" (215 mm) StickFix sanding pad.
A long-reach sander pays off in time and in your shoulders. At 63" (1.6 m) overall, the PLANEX EASY puts the sanding head on ceiling seams and high wall sections while you stand on the floor, so you spend your time sanding instead of climbing and repositioning. Within the Festool PLANEX drywall sanders family, the PLANEX EASY keeps things simple: one piece, no assembly, and a lightweight, balanced build for long sessions.
The motor is what separates it from many long-reach sanders. Festool mounts a direct-drive EC-TEC brushless motor right over the sanding pad instead of driving the head through a long flexible shaft. There is no drive cable to wear or bind, and no carbon brushes to replace, which means less maintenance and less downtime. The 400 W motor runs at a variable 400 to 920 RPM, so you can slow it down on fresh, soft compound or open it up to flatten heavier ridges.
The sanding head is flexible and follows the surface as you change angles from wall to ceiling. A removable top section on the head lets you sand right up to adjoining surfaces, such as inside corners where a wall meets the ceiling. The included extra-soft 8-7/16" (215 mm) StickFix pad conforms to the surface for an even finish without gouging.
Dust control is built in. The head captures dust right at the sanding surface, and the 27/36 mm extraction connection pairs with Festool dust extractors to pull dust away as you sand. On drywall that matters for more than cleanup: less airborne dust and cleaner rooms for the painters who follow.
The sander uses 9" (225 mm) Festool Granat abrasives, so it works with existing PLANEX abrasives you may already have on the truck. Weight is 8.8 lbs (4 kg), and the corded design means steady power for an entire room without battery swaps.
Power comes through a 13.1 ft (4 m) detachable plug-it cable, and a replacement PLANEX plug-it cable is available if the original is ever damaged on site.
Who should buy it? Drywall finishers, painters doing prep, and contractors who sand walls and ceilings regularly and want a reliable, low-maintenance long-reach sander. If you only patch a hole now and then, a hand sander will do. If you are sanding full rooms, the PLANEX EASY saves real time and real strain.
Flat, Even Walls
The flexible head follows the wall as you work, keeping the full pad in contact for consistent results across taped seams and skim coats.
- Variable speed 400 to 920 RPM
- 9" (225 mm) abrasive diameter
Overhead Without the Ladder
Ceilings are where a long-reach sander earns its keep. Stand on the floor, reach the seam, and keep moving down the room.
- 63" (1.6 m) overall length
- 8.8 lbs (4 kg), balanced for overhead work
Fast Abrasive Changes
The StickFix hook-and-loop pad takes Granat abrasives in seconds, so moving from a leveling grit to a finish grit does not slow the job down.
- Extra-soft 8-7/16" (215 mm) StickFix pad included
- Uses 9" (225 mm) Festool Granat abrasives
What's in the Box
- (1) PLANEX EASY LHS-E 225 EQ-CB long-reach drywall sander
- (1) 8-7/16" (215 mm) StickFix sanding pad, extra soft
- (1) Plug-it power cable
Abrasives and dust extractor sold separately.
Key Specifications
|
|
400 W |
|---|---|
|
|
120 V corded |
|
|
400 to 920 RPM |
|
|
Direct-drive EC-TEC brushless |
|
|
8-7/16" (215 mm) |
|
|
9" (225 mm) |
|
|
63" (1.6 m) |
|
|
8.8 lbs (4 kg) |
|
|
1-1/16" / 1-7/16" (27/36 mm) |
|
|
13.1 ft (4 m) plug-it cable |
Compatibility
Built For
Pro Tip
Start at the low end of the speed range on fresh compound and let the weight of the head do the work. Pushing hard with high speed is the fastest way to cut through the paper face at a taped seam.
Warranty & Support
Tool Nut's Take
The Festool PLANEX EASY LHS-E 225 EQ-CB Is the No-Fuss Way Into Long-Reach Sanding
One piece, a brushless motor at the head, and Festool dust control make the Festool 9-in. Corded Long-Reach Drywall Sander PLANEX EASY LHS-E 225 EQ-CB (578408) a sander you can count on every day.
- Who it's for: Drywall finishers, painters, and remodelers sanding full rooms of walls and ceilings.
- Why it stands out: Direct-drive brushless motor with no drive cable or brushes, 63" reach, and simple one-piece setup.
- Worth knowing: Abrasives and an extractor are not included. The PLANEX EASY starter set bundles the sander with a CT 36 AutoClean extractor and abrasives if you need the full system.
Common Questions
- Does it need to be assembled? No. The PLANEX EASY is a single-piece sander with no assembly required.
- Can it sand into inside corners? Yes. A removable top section on the head lets you sand up to adjoining surfaces such as wall-to-ceiling corners.
- Do I need a dust extractor? For dust capture, yes. The head captures dust at the sanding surface when it is connected to a suitable extractor, such as a Festool CT.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

