The Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander + CT 26 EI HEPA Dust Extractor Bundle pairs the Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander with the Festool CT 26 EI HEPA Dust Extractor, then adds the Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 and the Festool SELFCLEAN Filter Bags for CT 26, 5-Pack. This is a sander and HEPA dust extraction bundle designed for dust-free sanding of wood, paint, primer, filler and solid surface. Model number 576340-577871-578193-496187.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the ETS EC 125/3's dust port, the Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 loads the sander with 100 Granat 5-in. discs in five grits, P60 through P220, and the five spare SELFCLEAN bags are sized for the CT 26, so you are not shopping for consumables the first week.

Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander

The Festool ETS EC 125/3 EQ-Plus Random Orbital Sander is a 5 inch corded finish sander built for high-quality surface prep and final sanding. This is a random orbital sander designed for fine finish sanding on wood, paint, and other surface materials where control matters more than raw material removal. Model Number 576340. If you spend your day sanding doors, face frames, built-ins, panels, or painted surfaces, this is the kind of tool that earns its keep by staying smooth, light, and predictable.

The big story here is the combination of a brushless motor, a fine 1/8" (3 mm) sanding stroke, and a low-profile body. Festool rates the eccentric motion speed at 6,000 to 10,000 RPM, which gives you a useful speed range for dialing in the cut without turning the tool into a surface-damaging machine. That 3 mm stroke is what makes this sander a finish-first tool. It is meant for superfine sanding and refined surface work where you want to level, blend, and prep without leaving a rough scratch pattern behind.

Festool also got the ergonomics right. The compact body and top grip keep your hand close to the work, which improves feel and reduces fatigue during long sanding sessions. At 3.31 lbs, it stays light enough for vertical work, edge sanding, and overhead touchups without feeling awkward. The low-vibration design and active electronic vibration control are not just comfort features. They help you keep the pad flat, stay consistent, and avoid the arm fatigue that shows up when cheaper sanders start buzzing your hand numb.

Dust collection is a real part of the performance on this tool, not an afterthought. The ETS EC 125/3 EQ-Plus uses Festool Jetstream dust extraction and a 27 mm dust port, so dust is pulled through the pad to keep abrasive surfaces clearer while you work. In practical terms, that means less clogging, less airborne dust around finished spaces, and less chance of trapped debris scratching the workpiece. If you already work with a Festool dust extractor, this sander fits right into that workflow and makes more sense the more finish work you do indoors or in occupied spaces.

Another useful jobsite detail is the integrated pad brake with carbide-tipped components. When you lift the sander off the surface or set it down, the pad stops quickly. That helps reduce the chance of accidental marring on a finished surface and makes the tool feel more controlled between passes. Festool also includes a StickFix soft sanding pad, which speeds up abrasive changes and keeps the tool moving instead of wasting time peeling and reattaching discs that do not hold well.

Because this is a corded 120 VAC machine with a 13.1 ft (4 m) plug-it power cord, it is a good fit for production shops, cabinet installers, trim carpenters, painters, remodelers, and serious woodworkers who value consistent runtime over battery convenience. It is also a strong choice for anyone already invested in the Festool sanding system, since the sander is designed to work as part of a larger setup with matched abrasives, hoses, and extractors.

If your work leans toward final pass sanding, between-coat sanding, painted trim prep, or swirl-sensitive finish work, this tool makes more sense than a more aggressive random orbital sander. It is not trying to be a heavy stock removal machine. It is built for controlled, repeatable finish results, and that is exactly why pros buy it.

For dust-free finish sanding, pair this with the Festool 577874 CLEANTEC CT 36 EI AC AutoClean HEPA Dust Extractor, which auto-adjusts suction to match the sander's speed.

Festool CT 26 EI HEPA Dust Extractor

The Festool 577871 CLEANTEC CT 26 EI HEPA Dust Extractor is a professional jobsite and workshop dust extractor built for cleaner cutting, sanding, and general cleanup. This is a dust extractor designed for dry and wet extraction with tool-triggered operation. Model Number 577871. If you already run Festool saws, sanders, or cordless tools, this unit is built to act like the center of that system instead of just being a vacuum parked in the corner.

What makes the CT 26 EI matter is how it combines usable capacity with real mobility. The 6.9 gal (26 liter) container gives you nearly 7 gallons of room, but the machine still keeps compact dimensions at 25 inches long, 14 inches wide, and 22 inches high. That balance is a big deal on the job because larger extractors can be a pain to move, while smaller ones fill too quickly. Festool landed in the sweet spot here for cabinet work, remodeling, finish carpentry, and shop use.

Suction performance is strong where it counts. The high-performance turbine delivers up to 138 CFM and up to 96 inches of static water lift, which means it can keep up with dust collection at the tool while also handling cleanup duties. The five-level suction adjustment matters just as much as the max number. Being able to back the suction down helps when you are working with sanders or on surfaces where too much pull can fight the tool.

The control layout is more practical than old-school dial-and-switch setups. Festool uses push-button touch controls for straightforward operation, and the extractor supports automatic tool-triggered start for corded power tools. On the cordless side, the built-in Bluetooth interface lets the extractor start automatically with compatible Festool Bluetooth battery packs or an optional remote. That saves steps, keeps dust collection active when it should be, and makes the machine feel like part of the workflow instead of a separate task to manage.

Festool also paid attention to the stuff that usually gets ignored until it annoys you. The anti-static smooth suction hose is designed to reduce snagging and static buildup. The integrated hose holder and cord wrap keep the setup from turning into a mess in the van or at the end of the day. Large wheels make it easier to roll over thresholds and rougher surfaces, while the integrated brake helps keep the extractor from wandering when the hose gets tugged.

As a system machine, the CT 26 EI is set up to do more than collect dust. T-LOC compatibility allows Systainers to attach on top, and it also works as a base for other Festool workflow add-ons like the Pre-separator or Workcenter. That is useful if you want one mobile station carrying the extractor and the tools or accessories needed for the task. In a small shop or a punch-list van, that kind of stackable setup saves space fast.

Filtration is another reason buyers step up to this model. It includes a HEPA main filter plus a SELFCLEAN filter bag, so you are starting with a setup aimed at fine dust control rather than bare-minimum debris pickup. For trades working indoors, especially around finish work, sanding dust, or occupied spaces, that matters. Cleaner air and cleaner floors mean less time on cleanup and less dust spreading through the room you just worked in.

Who should buy it? Pros who want a serious dust extraction setup that works in the shop and on install work. It makes sense for woodworking, finish carpentry, remodeling, interior renovation, and anyone already invested in Festool tools and Systainers. If you just need a basic cleanup vacuum, this is more machine than you need. If you want a dust extractor that integrates into how you actually work, the CT 26 EI is the right kind of upgrade.

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The Festool 578193 Granat D125 Abrasives 100-Piece Value Set Systainer3 is a 5 inch abrasive disc assortment packed in a SYS3 M 112 Systainer for storage, transport, and quick grit changes. This is a sanding disc set designed for surface preparation and finish sanding across painted surfaces, hard substrates, plastics, acrylic, fillers, and repair compounds. Model Number: 578193. If you use a compatible Festool 5" (125 mm) sander and want a clean starting lineup of discs instead of piecing together separate boxes, this set makes sense.

What matters here is the grit spread. You get 20 discs each in P60, P80, P120, P180, and P220, so you can move from heavier material removal into intermediate smoothing and final finish work with one case. For a painter, finisher, or woodworker, that means less guessing about what to order first and fewer interruptions when a job changes halfway through.

Festool SELFCLEAN Filter Bags for CT 26, 5-Pack

The Festool SC FIS-CT 26/5 SELFCLEAN Filter Bag is a replacement filter bag pack for Festool CT 26 dust extractors. This is a dust extractor filter bag designed for collecting fine dust and debris while helping the vacuum maintain strong airflow. Model Number 496187. If you run a CT 26 in the shop or on site, this is the bag setup that makes the extractor work the way it is supposed to.

Who should buy this bundle? Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air. The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work.

Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander

Festool CT 26 EI HEPA Dust Extractor

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The sander and the extractor you'd end up buying anyway

The Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander + CT 26 EI HEPA Dust Extractor Bundle gets you a complete Festool sander system in one order, with the accessories you would buy next already in the box.

• Who it's for: Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air.
• Why it stands out: The ETS EC 125/3 and the CT 26 are built to work together, and the matched Granat Abrasives plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• Is this a corded or cordless sander? It is a corded random orbital sander powered by 120 VAC and supplied with a 13.1 ft (4 m) plug-it power cord.
• What kind of sanding is the 1/8" (3 mm) stroke best for? The 1/8" (3 mm) stroke is best for fine and superfine finish sanding where you want a smoother scratch pattern and more control.
• Can this extractor handle wet and dry pickup? Yes. Festool lists the CT 26 EI HEPA as ideal for dry and wet extraction.
• Does it support automatic start with tools? Yes. It is designed for automatic tool-triggered operation with corded power tools, and the built-in Bluetooth also supports automatic start from compatible Festool cordless tools or an optional remote.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 496187 SELFCLEAN filter bags are made for the Festool CT 26, the extractor included in this bundle.