Festool Flush Cut Router Bit for OFKC 500 Router (490565)
Festool Flush Cut Router Bit for OFKC 500 Router (490565)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool Flush Cut Router Bit for OFKC 500 Router (490565) is a purpose-built edge trimming cutter for clean, accurate flush trimming on edge banding. This is a flush trim router bit designed for trimming plastic and solid wood edge banding. Model Number 490565. If you run an OFKC 500 or OFK 500 and want a cutter that tracks cleanly and leaves a finished edge without fighting the tool, this is the right bit for that job.
What matters here is control. Festool matched the 7/8 inch cutting diameter to the ball bearing guide so the cutter follows the workpiece smoothly and trims right to the edge. In practical use, that means less guesswork, more predictable contact, and a cleaner pass when you are finishing cabinet parts, furniture panels, or other edged stock.
The carbide cutting edges are the big durability story. On repetitive edge trimming work, sharpness matters because a dull cutter can chip delicate edging, burn wood, or leave a rough surface that needs more handwork. Carbide helps this cutter stay productive longer, especially if you are trimming a mix of plastic edging and solid wood materials.
Festool also uses a hollow-shaft, collet-free design for this cutter. The benefit is straightforward: secure mounting with fewer setup steps on the compatible edge routers it was designed around. That saves time during cutter changes and helps keep the setup stable for repeatable trimming results.
This cutter is a strong fit for shops and installers doing cabinetry, furniture production, and finish carpentry. It is not a general-purpose router bit you throw into any router. It is a dedicated edge trimming accessory made to work with Festool OFK 500 and OFKC 500 routers, so the value is highest for users already on that platform and doing regular flush trimming work.
If your work involves edge banding and you care more about finished results than making do with a close-enough cutter, this one makes sense. The bearing-guided design, carbide edges, and Festool-specific mounting all point to the same thing: fast, controlled trimming on materials where a sloppy cut stands out immediately.
Controlled Trimming on Finished Edges
This flush trim router bit is built to ride the edge cleanly and keep the cut consistent on finished panels and edged parts. That is exactly what you want when the goal is a clean reveal and not extra sanding or touch-up work.
- 7/8 inch cutting diameter with matching ball bearing guide for controlled edge-following
- 5/16 inch cutting length suited for flush trimming edge banding materials
What's in the Box
- (1) Edge Trimming Cutter
Key Specifications
| Tool Type | Edge trimming cutter / flush trim router bit |
|---|---|
| Cutting Diameter | 7/8" (22 mm) |
| Cutting Length | 5/16" (8 mm) |
| Guide Type | Ball bearing guided |
| Cutting Edge Material | Carbide |
| Mounting Style | Collet-free hollow-shaft design |
| Compatible Routers | Festool OFK 500 and OFKC 500 |
| Weight (lbs) | 1 lb |
Compatibility
Built For
Pro Tip
If you are switching between plastic edging and solid wood edging, check the bearing and cutter edge before the next run. A clean, free-spinning bearing is what keeps this cutter tracking the panel instead of marking it up at the finish stage.
Warranty & Support
Tool Nut's Take
Festool Flush Cut Router Bit for OFKC 500 Router That Does the Job Cleanly
The Festool Flush Cut Router Bit for OFKC 500 Router (490565) is the kind of dedicated accessory that makes sense when edge quality actually matters.
- Who it's for: Cabinet shops, trim carpenters, and furniture builders using Festool OFK 500 or OFKC 500 routers for regular edge banding work.
- Why it stands out: The matched bearing-guided design and carbide edges are what make this one worth buying instead of forcing a generic cutter into a precision job.
- Worth knowing: This is a specialized trimming cutter, not a do-everything router bit, and it only makes sense if you have the compatible Festool edge router.
Common Questions
- What is this cutter designed to do? It is designed for flush trimming plastic and solid wood edge banding cleanly and accurately.
- Which routers does it fit? It is compatible with Festool OFK 500 and OFKC 500 routers.
- Does it use a bearing guide? Yes. It uses a ball bearing guide for smooth, controlled edge following.
- What are the cutter dimensions? The cutting diameter is 7/8" (22 mm) and the cutting length is 5/16" (8 mm).

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


