The Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander + CT 36 EI HEPA Dust Extractor Bundle pairs the Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander with the Festool CT 36 EI HEPA Dust Extractor, then adds the Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 and the Festool SELFCLEAN Filter Bags for CT 36, 5-Pack. This is a sander and HEPA dust extraction bundle designed for dust-free sanding of wood, paint, primer, filler and solid surface. Model number 576032-577872-578193-496186.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the RO 125's dust port, the Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 loads the sander with 100 Granat 5-in. discs in five grits, P60 through P220, and the five spare SELFCLEAN bags are sized for the CT 36, so you are not shopping for consumables the first week.

Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander

The Festool 576032 RO 125 FEQ-Plus Rotex 5" (125 mm) Multi-Mode Sander w/ Systainer3 is a compact corded sanding and polishing tool built for users who need one machine to handle rough stock removal, finish sanding, and polishing. This is a multi-mode sander designed for fast material removal, fine surface prep, and polishing on wood and similar finished surfaces. Model Number: 576032.

What makes this sander different is the ROTEX system. In the gear-driven mode, it cuts aggressively for stripping finishes, flattening surfaces, and removing material quickly. Switch to random orbital mode and it becomes a finish sander for finer surface work. Festool also calls it a triple-function tool because it can polish as well, which matters if you want one machine that can move from prep to finish work without dragging multiple sanders onto the bench.

The motor is rated at 500 watts and the speed range is broad enough to cover both heavy and controlled work. ROTEX rotary motion runs at 300 to 600 RPM, while eccentric motion runs from 3,000 to 6,000 RPM. On the job, that means you can lean on it when you need faster stock removal, then back down and refine the surface when the goal is a cleaner final pass. The 1/8" (3.6 mm) sanding stroke helps balance removal rate with surface quality, which is why this model lands in that useful middle ground between a dedicated heavy remover and a dedicated finish-only sander.

The size is a big part of the appeal. With a 5" (125 mm) FastFix pad and a compact body, the RO 125 is easier to maneuver than a larger dual-mode sander, especially on vertical panels, cabinet parts, tabletops, and tighter working areas. Festool also highlights its ergonomic shape and multiple grip positions, and you can see why from the body design. It gives you a secure front-hand grip for control and a rear hold that keeps the machine planted when you need to work flat and steady.

Dust control is one of the reasons people buy into Festool in the first place, and this model is built around that idea. The Jetstream dust extraction design is there to pull dust away efficiently, which helps keep the abrasive cutting cleaner instead of loading up fast. Better dust collection is not just about keeping the shop cleaner. It helps you see the scratch pattern, reduces cleanup, and can extend the life of both abrasives and the pad. The dust extraction connection diameter is 1-1/16" (27 mm), which matters if you are pairing it with a hose and extractor setup.

The RO 125 also focuses on jobsite practicality. The FastFix tool-free backing pad system lets you change pads quickly to match the task, so you are not wasting time wrestling with hardware when moving from heavier sanding to a more delicate surface. Festool also notes an integrated pad brake and an edge protector. Those details matter when you are working near adjacent surfaces or when you want to avoid marring the workpiece as the pad spins down.

As a corded tool, this sander runs on 120 VAC and includes Festool's Plug-It power cord system. That detachable cord setup is useful if you already run multiple Festool corded tools because it speeds up changeover and keeps cord management simpler at the bench or on site. It also ships in a Systainer3, which is more than packaging. It keeps the tool, cord, protector, and pad together so the sander is easier to store, transport, and stack with the rest of a Festool setup.

Who is this for? Woodworkers, painters, solid surface fabricators, remodelers, and finish-focused trades who need one compact sander that can do more than one job well. If your work regularly moves from paint removal or heavier prep into finish sanding on the same project, the RO 125 makes a lot of sense. If all you need is a light finish sander, it may be more tool than necessary. But if you want versatility in a compact 5 inch platform, this is the kind of machine that earns its space fast.

Festool CT 36 EI HEPA Dust Extractor

The Festool 577872 CLEANTEC CT 36 EI HEPA Dust Extractor is a professional dust extractor built for workshop dust collection and jobsite cleanup. This is a dust extractor designed for dry and wet extraction, tool-triggered dust collection, and cleaner work around corded and compatible cordless tools. Model Number 577872. If you need one extractor that can handle daily sanding, cutting, drilling, and general cleanup without constantly stopping to empty it, this is the one Festool built to sit right in the middle of your system.

The big selling point here is capacity without the usual penalty in size. Festool gives you a 36-liter container, or nearly 9.5 gallons, while keeping the machine compact enough to move through a shop or around a remodel. That matters when you are collecting dust all day from sanders, track saws, routers, or cleanup work and do not want a small extractor filling up every couple of hours. With up to 138 CFM of airflow and a maximum vacuum rating of 96 inches of static water lift, it has the pull needed for serious dust collection, not just light bench cleanup.

Festool also got the controls right. The touch-style push-button interface is simple to use, and you get five suction levels instead of one fixed setting. That means you can back suction down when a sander wants controlled airflow, or turn it up when you are collecting heavier debris. Tool-triggered operation for corded tools keeps the extractor and tool working together automatically, which is a real time-saver when you are bouncing from cut to cut or moving through repetitive sanding work.

Where this model separates itself from a basic shop vacuum is system integration. The built-in Bluetooth interface lets the extractor start automatically with compatible Festool Bluetooth battery packs or an optional remote control. You can also connect it to the Festool app for support and warning notifications. On the job, that means less walking over to the extractor and less breaking your rhythm. If you already run Festool cordless tools or want cleaner remote startup control, this is a meaningful upgrade over a standard corded extractor.

The physical design is clearly aimed at daily use. The smooth anti-static suction hose is built to reduce snagging, which matters more than it sounds when you are moving around a bench, assembly table, or finished interior. Festool includes integrated hose storage and cord wrap so the setup stays organized instead of turning into a pile of hose and cable at the end of the day. Large wheels make it easier to roll, while the integrated brake keeps it planted once you have it where you want it.

It is also built to function as a hub, not just a vacuum. T-LOC compatibility lets you dock Systainers on top, and Festool also calls out compatibility with the Pre-separator and Workcenter. That gives you one rolling station for extraction, storage, and workflow organization. In a shop, that keeps sanding and cutting accessories together. On a remodel or install job, it cuts down on trips back to the van and helps keep the work area tighter and cleaner.

The included HEPA main filter is a big part of why this extractor matters to pros working indoors, in occupied homes, or anywhere dust control is not optional. Festool rates it for both dry and wet extraction, which adds flexibility when cleanup conditions change during the day. The anti-static setup also helps reduce nuisance static buildup during operation, which makes the overall system feel more refined than a generic jobsite vacuum.

Who should buy it? This extractor makes the most sense for woodworkers, remodelers, finish carpenters, installers, and serious DIY users who already care about cleaner cuts, better sanding results, and less post-job cleanup. If you want the cheapest vacuum possible, this is not that tool. If you want a dust extractor that works like part of a complete Festool workflow and earns its keep every day, the CT 36 EI HEPA is the kind of machine you buy once and use for years.

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The Festool 578193 Granat D125 Abrasives 100-Piece Value Set Systainer3 is a 5 inch abrasive disc assortment packed in a SYS3 M 112 Systainer for storage, transport, and quick grit changes. This is a sanding disc set designed for surface preparation and finish sanding across painted surfaces, hard substrates, plastics, acrylic, fillers, and repair compounds. Model Number: 578193. If you use a compatible Festool 5" (125 mm) sander and want a clean starting lineup of discs instead of piecing together separate boxes, this set makes sense.

What matters here is the grit spread. You get 20 discs each in P60, P80, P120, P180, and P220, so you can move from heavier material removal into intermediate smoothing and final finish work with one case. For a painter, finisher, or woodworker, that means less guessing about what to order first and fewer interruptions when a job changes halfway through.

Festool SELFCLEAN Filter Bags for CT 36, 5-Pack

The Festool 496186 SELFCLEAN Filter Bag for CT 36 is a replacement dust extractor bag made for Festool CT 36 units. This is a dust extractor filter bag designed for collecting fine dust and debris while maintaining consistent suction. Model Number: 496186. If you run a CT 36 on sanding, cutting, or general cleanup, this bag matters because it helps the extractor keep working efficiently instead of fading off as the bag fills.

Who should buy this bundle? Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air. The CT 36 EI has the largest container of the three, 9.5 gal (36 L), with 138 CFM of airflow for high-volume sanding, sheet goods breakdown and fewer bag changes.

Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander

Festool CT 36 EI HEPA Dust Extractor

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The sander and the extractor you'd end up buying anyway

The Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander + CT 36 EI HEPA Dust Extractor Bundle gets you a complete Festool sander system in one order, with the accessories you would buy next already in the box.

• Who it's for: Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air.
• Why it stands out: The RO 125 and the CT 36 are built to work together, and the matched Granat Abrasives plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT 36 EI has the largest container of the three, 9.5 gal (36 L), with 138 CFM of airflow for high-volume sanding, sheet goods breakdown and fewer bag changes. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• Is this a corded or cordless sander? It is a corded 120 VAC sander and includes a Festool Plug-It power cord.
• Can this tool do more than finish sanding? Yes. It is designed for coarse sanding, fine sanding, and polishing.
• Is this dust extractor rated for wet and dry use? Yes. Festool lists the CT 36 EI HEPA as ideal for both dry and wet extraction.
• Does it support automatic startup with tools? Yes. It supports tool-triggered operation for corded power tools and also has built-in Bluetooth for compatible Festool cordless tools or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 496186 SELFCLEAN filter bags are made for the Festool CT 36, the extractor included in this bundle.