The Freud 34-110 1/4-Inch Radius Rounding Over Router Bit (Quadra-Cut) is built for softening sharp edges and creating a clean, finished profile on wood and composite parts. This is a rounding over router bit designed for edge treatment on furniture, millwork, doors, drawers, and other routed parts. Model Number: 34-110. If you want a simple way to make workpieces feel finished instead of raw and sharp, this bit does exactly that.

The big reason this bit stands out is Freud's Quadra-Cut geometry. Instead of relying on a basic two-edge cut, this design uses four cutting edges to improve finish quality, especially in cross-grain passes where chipping and fuzzing can ruin an otherwise good piece. In plain terms, it helps you spend less time sanding and cleaning up routed edges after the cut.

The profile is built around a 1/4 inch radius, which is one of the most useful edge profiles in a shop because it softens corners without making the part look overly decorative. That makes this bit a good fit for furniture edges, cabinet parts, drawer fronts, small moldings, and any place where you want a more comfortable, finished edge. The 1-1/8 inch overall diameter and 5/8 inch bearing diameter support controlled, repeatable edge routing.

Freud also gives this bit a Perma-SHIELD coating, which is there for a reason. It reduces drag during the cut and helps protect the bit from heat, corrosion, and pitch buildup. On the bench, that means smoother feeding, less gumming when working resinous woods or sheet goods, and easier cleanup over time. For a router bit that may see regular use, that matters.

The cutting body is carbide tipped, so it is made to hold an edge better than basic steel bits when you're running hardwood, plywood, MDF, veneered plywood, composites, or plastic. Freud rates the bit for a maximum 18,000 RPM, so it is meant to be used in a controlled speed range rather than just spinning flat-out without thought. Matching router speed to material will help you get the best finish and avoid burning.

From a fit standpoint, the 1/4 inch shank works with routers that accept a 1/4 inch collet. Freud lists it for CNC, hand-held, and table-mounted routers, which gives it useful flexibility depending on how your shop is set up. If you are building small parts by hand one day and running more repeatable work at the router table the next, this bit crosses over well.

Another practical detail is that this bit can do more than one job. Freud notes that if you install a bearing that is 1/8 inch smaller in diameter, you can create a beading profile and get more mileage out of the same cutter. That is the kind of detail shop guys appreciate because it stretches the usefulness of a bit you already trust.

This bit makes the most sense for woodworkers, cabinet installers, finish carpenters, furniture builders, and serious DIY users who want predictable edge quality without a lot of fuss. If your work regularly involves easing edges on visible parts and you care about surface finish right off the router, the Freud 34-110 is the kind of bit that earns a permanent spot in the drawer instead of being a one-off specialty cutter.

Freud 34-110 1/4-Inch Radius Rounding Over Router Bit (Quadra-Cut) Is a Shop Staple, Not a Gimmick

If you run a router even semi-regularly, this is one of those bits that solves a common job and does it with better finish quality than bargain-profile bits.

• Who it's for: Woodworkers, cabinet guys, finish carpenters, and serious DIY users who want to ease sharp edges on visible parts without a bunch of sanding afterward.
• Why it stands out: The Quadra-Cut design is the real story here. Four cutting edges, carbide tips, and the Perma-SHIELD coating add up to cleaner cuts and less fuss across hardwood, plywood, and composites.
• Worth knowing: This is a 1/4 inch shank bit, so make sure your router is set up for that collet size. Also, keep the speed in line with the 18,000 RPM limit and you will get better results than just cranking the router wide open.

• What kind of bit is this? This is a rounding over router bit designed for softening sharp edges on wood, plywood, composites, and plastic.
• What routers can use this bit? It is designed for routers that accept a 1/4 inch shank, including hand-held, table-mounted, and CNC routers.
• What is the cutting radius? The bit cuts a 1/4 inch radius profile.
• What is the maximum RPM? Freud rates this bit for a maximum speed of 18,000 RPM.
• Can it do more than a standard round-over? Yes. Freud notes that with the proper smaller bearing setup, it can also be used for beading work.