The Freud 62-160 1/2 in. Square Non-Marring Replacement Bearing is a replacement router bit bearing for flush trim routing applications. This is a replacement bearing designed for flush trim routing of laminates and other finished surfaces. Model 62-160 is a good fit for woodworkers, cabinet installers, and countertop fabricators who need clean edge work without leaving marks on finished material.

Where this bearing earns its keep is surface protection. Freud uses a synthetic Delrin outer surface that helps avoid scratching, burning, or marring laminated faces and edges while the router bit follows the workpiece. If you're trimming laminate flush to a substrate, that matters a lot. One mark can ruin a finished panel, force rework, or turn a simple trim pass into a replacement job.

The square shape is not just a design detail. It is there to give smoother surface contact and better control while routing. On flush trim jobs, especially when you're working around edges that need to stay crisp and clean, predictable tracking helps you keep the bit where it belongs. That makes this bearing a smart upgrade or replacement when standard bearings are leaving marks or loading up during laminate work.

Another practical advantage is reduced glue build-up. The synthetic material is designed to resist the glue accumulation that can make bearings drag or stop rolling freely over time. For anyone working with laminate, edge banding, or adhesive-backed materials, that means less cleanup and more consistent performance across repeated passes.

From a fitment standpoint, this is a replacement for bearings supplied with Freud flush trim bits, and it will also fit many other manufacturers' bits. The listed dimensions are a 1/2 in. bearing diameter, 3/16 in. bore diameter, and 7/32 in. minor height. Those numbers are what matter when matching a replacement bearing to an existing router bit, so check your current hardware before ordering.

This is not a general-purpose bearing for every router bit setup. It is best for users who know they need a non-marring flush trim bearing for laminate routing and want better surface protection than a standard metal contact bearing can provide. If you do finish-sensitive trim work, countertop fabrication, cabinet refacing, or laminate cleanup, this is the kind of small part that prevents big headaches.

Freud 62-160 1/2 in. Square Non-Marring Replacement Bearing for finish-sensitive routing

This is one of those small router bit parts that makes a real difference when the material is already finished and there is no room for mistakes.

• Who it's for: Woodworkers, laminate installers, and cabinet guys doing flush trim routing on finished surfaces.
• Why it stands out: The non-marring Delrin surface and square profile are both aimed at cleaner laminate trimming with better control.
• Worth knowing: This is a replacement bearing, not a universal cure-all. Match the dimensions to your bit before you buy, especially the 3/16 in. bore.

• What is this bearing designed for? It is designed for flush trim routing of laminates and other finished surfaces where a non-marring contact surface is important.
• Will it fit only Freud router bits? It is a replacement for Freud flush trim bits, and it will also fit many other manufacturers' bits when the dimensions match.
• What makes it non-marring? The bearing uses a synthetic Delrin surface that helps avoid scratching, burning, and marring laminated surfaces.
• What dimensions should I verify before ordering? Check the bearing diameter, bore diameter, and height. The listed dimensions are 1/2 in. diameter, 3/16 in. bore, and 7/32 in. minor height.