The Freud LU87R010 10 in. Thin Kerf Rip Blade is a carbide-tipped saw blade built for wood ripping on table saws and radial arm saws. This is a rip blade designed for fast, efficient cutting along the grain in solid wood and sheet goods. Model Number LU87R010. If you are running an underpowered saw and want cleaner feed with less strain on the motor, this blade is aimed right at that problem.

The big story here is the thin kerf. At .094 inch, this blade removes less material than a heavier full-kerf blade, so it takes less horsepower to stay on pace through the cut. Freud specifically calls out this blade as a good fit for underpowered saws, and that matters in smaller shops, jobsite setups, and older machines where every bit of available power counts. Less material removed also means less waste, which is always a plus when you are working through expensive stock.

This blade uses a 24-tooth flat top grind, which is the right setup for ripping work. That tooth pattern is made to move through wood efficiently instead of trying to do everything at once. In plain terms, it is built to cut with the grain, clear chips well, and keep feed pressure manageable. The 20 degree hook angle also helps the blade pull into the cut more easily, which supports faster feeding in ripping applications.

Freud uses its TiCo high-density carbide ripping blend on this blade, and that is not just brochure talk. On a rip blade, carbide quality matters because it affects edge life, how well the blade handles repeated production work, and how consistently it stays sharp across hardwood and softwood. If you do regular ripping and do not want to swap or sharpen blades constantly, this is one of the details worth paying attention to.

The Perma-SHIELD non-stick coating is another feature that earns its keep in actual use. Resin, pitch, and heat can all add drag and make a saw feel weaker than it is. This coating is there to reduce blade drag, limit build-up, and help protect against corrosion. Freud also states that the coating helps the blade pull less on the saw, which can translate into more usable cutting power. That is especially useful when the saw itself is the limiting factor.

Fitment is straightforward. The Freud LU87R010 10 in. Thin Kerf Rip Blade has a 10 inch diameter with a 5/8 inch arbor, which matches many table saws and radial arm saws in this class. Freud lists an ideal working range of 3/4 inch to 2-3/4 inch thick material, so this blade is best used where it is supposed to be used: ripping wood stock in that range, not trying to force one blade into every job in the shop.

As for materials, Freud identifies this blade for wood and shows it as suitable for crosscut wood, chipboard, plywood, laminate, and OSB, with the strongest recommendation centered on ripping. It is not recommended for non-ferrous metals. That kind of clear limitation is actually helpful. You know what the blade is for, and just as important, what it is not for.

Who should buy it? Woodworkers, cabinet shops, remodelers, and contractors using a table saw who want a dedicated rip blade without overloading a lighter-duty saw. If your current blade feels slow in rip cuts, burns material, or makes your saw work harder than it should, this Freud blade makes a lot of sense. It is a focused blade for a specific job, and that usually means better results than asking a general-purpose blade to do specialized work.

A Smart Rip Blade for Saws That Need a Break

The Freud LU87R010 10 in. Thin Kerf Rip Blade is the kind of blade that makes a modest table saw feel more capable where it counts: straight ripping work.

• Who it's for: Woodworkers, remodelers, and contractors running a table saw or radial arm saw who want a dedicated rip blade that does not ask for a ton of horsepower.
• Why it stands out: The thin kerf, 24-tooth flat top design, 20 degree hook angle, and Perma-SHIELD coating all work toward the same goal: easier feeding and better ripping efficiency.
• Worth knowing: This is a purpose-built rip blade, not a do-everything blade. It is also not recommended for non-ferrous metals, so keep it in its lane and it should reward you for it.

• What type of saw is this blade designed for? It is designed for table saws and radial arm saws that use a 10 in. blade with a 5/8 in. arbor.
• What kind of cutting is this blade best at? It is a rip blade, which means it is built for cutting with the grain in wood rather than being a general-purpose blade.
• What material thickness range is recommended? Freud lists the ideal working range as 3/4 in. to 2-3/4 in. thick.
• Can this blade be used for non-ferrous metals? No. Freud specifically says non-ferrous cutting is not recommended.