Freud 10-in. Thin Kerf Fine Finish Crosscut Blade (LU88R010)
Freud 10-in. Thin Kerf Fine Finish Crosscut Blade (LU88R010)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
Freud LU88R010 10 in. Thin Kerf Fine Finish Crosscut Blade is a 10 inch carbide-tipped circular saw blade made for smooth, fine-finish crosscuts in wood sheet goods and trim materials. This is a crosscut saw blade designed for fine finish crosscutting on underpowered saws. Model Number: LU88R010. With a 10 inch diameter, 60-tooth layout, 5/8 inch arbor, .090 inch kerf, and 15 degree hook angle, it is aimed at users who want cleaner cuts without asking too much from a portable or lower-horsepower saw.
The big story here is the thin kerf design. A thinner kerf means the blade removes less material on each pass than a standard full-kerf blade. In real use, that reduces feed resistance and puts less strain on the motor, which is why this blade is a smart match for jobsite table saws and other saws that do not have a lot of extra power in reserve. Freud also states the Perma-Shield coated blade pulls 1/3 less on the saw, which translates to up to 33% more effective cutting power.
The 60-tooth configuration and ATB grind are what make this blade a fine-finish option instead of a rough framing blade. That combination is geared toward cleaner crosscuts in hardwood, softwood, plywood, chipboard, laminate, and moldings. If you are cutting face material where edge quality matters, this is the kind of blade that helps reduce tear-out and leaves a cut that needs less sanding or touch-up afterward.
Freud uses its TiCo Hi-Density Carbide crosscutting blend on this blade, and that matters because edge retention is what separates a blade that cuts clean for a while from one that starts burning or fuzzing edges too soon. For cabinet parts, trim pieces, and visible finish work, a durable carbide edge helps keep results consistent longer between sharpenings.
The Perma-Shield non-stick coating adds more than just shelf appeal. It helps reduce blade drag, protects against corrosion, and slows down pitch buildup, which is a real benefit if you cut a lot of resinous wood or plywood. A cleaner blade runs better, feeds more predictably, and is less likely to leave burn marks when the work gets repetitive.
Capacity matters too. Freud lists this blade for cuts from 1/2 inch minimum up to 2-3/4 inch maximum depth of cut. That makes it a practical choice for trim stock, moldings, sheet goods, and a lot of general finish carpentry work where you want crosscut quality over aggressive ripping speed. It is not recommended for non-ferrous metals, and it is not the blade you buy for rough rip cuts all day long.
Compatibility is straightforward: this blade fits saws that accept a 10 inch blade with a 5/8 inch arbor and the proper blade type. That makes it relevant for many table saws and miter saw applications where a fine-finish crosscut blade is the right call. The thin plate of .071 inch supports the low-resistance cut profile while the anti-vibration design helps the blade track cleaner through the cut.
Who should buy it? Finish carpenters, cabinet installers, remodelers, trim crews, and serious DIY users who are tired of rough edges from stock blades. If your saw is portable, older, or simply not overloaded with horsepower, the Freud LU88R010 10 in. Thin Kerf Fine Finish Crosscut Blade makes a lot of sense because it improves cut quality without demanding more motor than the saw can comfortably deliver.
Fine Finish Results on Real Trim and Sheet Goods
This blade is built for the kind of cutting where the edge actually matters. When you are trimming parts to final size or crosscutting material that will stay visible, a fine-finish crosscut blade saves time by reducing edge cleanup.
- 60-tooth layout helps leave a smoother crosscut surface than a general-purpose blade
- ATB grind is tuned for cleaner cuts in wood-based materials
- Ideal materials listed by Freud include hardwood, softwood, plywood, chipboard, laminate, and moldings
Why Choose the Freud LU88R010 10 in. Thin Kerf Fine Finish Crosscut Blade
Why Choose the Freud LU88R010 10 in. Thin Kerf Fine Finish Crosscut Blade
On paper, the specs look simple. On the saw, they work together for one clear benefit: easier, cleaner crosscutting on machines that do not have endless power to spare.
- .090 inch thin kerf reduces waste and lowers cutting resistance
- 15 degree hook angle promotes a smoother cut and faster feed rate
- Perma-Shield coating helps reduce drag and protects against corrosion and pitch buildup
What's in the Box
- (1) Freud LU88R010 Fine Finish Crosscutting Thin Kerf Saw Blade
Key Specifications
| Diameter | 10 in. |
|---|---|
| Number of Teeth | 60 |
| Arbor Size | 5/8 in. |
| Kerf | .090 in. |
| Plate Thickness | .071 in. |
| Hook Angle | 15° |
| Grind | ATB |
| Material | Carbide |
| Maximum Depth of Cut | 2-3/4 in. |
| Minimum Depth of Cut | 1/2 in. |
| Maximum RPM | 7000 |
| Weight | 1.7 lbs |
Compatibility
Built For
Pro Tip
If your portable saw feels bogged down with a stock blade, switching to this thin kerf crosscut blade can make the saw feed easier right away. Use it when finish quality matters, then swap back to a ripping blade for heavy rip work instead of asking one blade to do both jobs.
Warranty & Support
Tool Nut's Take
A Smart Blade Upgrade for Saws That Need a Little Help
The Freud LU88R010 10 in. Thin Kerf Fine Finish Crosscut Blade is the kind of upgrade you notice on the first clean cut, especially if your saw is portable or light on horsepower.
- Who it's for: Finish carpenters, remodelers, cabinet installers, and DIY users who want cleaner crosscuts in trim, plywood, and finish materials.
- Why it stands out: The thin kerf design makes life easier on underpowered saws, while the 60-tooth ATB layout and TiCo carbide focus on edge quality instead of rough production cutting.
- Worth knowing: This is a finish-first blade, not an all-day ripping blade, and Freud specifically says non-ferrous cutting is not recommended on this model.
Common Questions
- What type of cutting is this blade designed for? It is designed for fine finish crosscutting in hardwood, softwood, plywood, chipboard, laminate, and moldings.
- Will it fit my saw? It fits saws that accept a 10 inch blade with a 5/8 inch arbor and the appropriate blade type.
- Why use a thin kerf blade? A thin kerf blade removes less material, which reduces feed resistance and helps underpowered saws cut more easily.
- Can this blade be used for non-ferrous metal? No. Freud lists non-ferrous cutting as not recommended for the LU88R010.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

