Freud 8-in. Double Sided Laminate/Melamine Blade (LU97R008)
Freud 8-in. Double Sided Laminate/Melamine Blade (LU97R008)
Out of Stock - Available to Order - Usually ships in 5-7 days
Product Details
Product Details
Key Features
Overview
The Freud LU97R008 8 in. Double Sided Laminate/Melamine Blade is a specialty saw blade built for clean, low-chip cuts in double-sided laminate, melamine, and veneered plywood. This is a table saw blade designed for fine finish cutting in laminate and melamine sheet goods. Model Number: LU97R008. If you're doing cabinet parts, shelving, store fixtures, or other work where both faces of the panel need to stay clean, this blade is aimed right at that job.
Freud specs this blade with an 8 inch diameter, 64 teeth, a 5/8 inch arbor, a 0.126 inch kerf, and a Triple Chip Grind tooth pattern. In practical terms, that tooth layout is one of the big reasons this blade works so well in brittle-faced materials. It is built to reduce chipping and hold a crisp edge on the top and bottom of the panel, which matters when you're cutting prefinished stock that can't be sanded or cleaned up afterward without ruining the finish.
The carbide matters too. Freud uses its TiCo Hi-Density carbide laminate blend here, which is meant for long life in abrasive materials. Laminate and melamine are hard on cutting edges, so a blade that can stay sharp longer is not just a durability perk, it is a real productivity gain. Fewer blade changes and fewer rejected parts add up fast when you're running repeated cuts.
Another jobsite-friendly detail is the laser-cut anti-vibration slot design. Freud calls out reduced vibration and less sideways movement in the cut, and that is exactly what you want when the goal is finish quality. A steadier blade tends to cut cleaner, sound smoother, and leave a more controlled edge, especially on sheet goods where surface chipping shows immediately. The Perma-SHIELD non-stick coating also helps by reducing drag while protecting the blade from corrosion and pitch build-up.
This blade is rated for material up to 1-5/8 inches thick and for a maximum speed of 9,000 RPM. That gives you enough range for common panel-cutting tasks on the right saw setup without stepping outside the blade's intended use. Freud specifically notes that non-ferrous cutting is not recommended, so this is a blade to keep dedicated to laminate, melamine, plywood, chipboard, and similar man-made wood products where finish quality is the priority.
Compatibility is straightforward: the 5/8 inch arbor fits saws that accept an 8 inch blade with that arbor size. It is a table saw blade, so this is best matched to table saw setups built around that blade size and arbor. If your work is mostly cabinet parts, built-ins, closet systems, or production ripping and crosscutting of finished panels, this is the kind of blade that earns its keep quickly.
Who should buy it? Cabinetmakers, finish carpenters, shop owners, installers, and serious DIY users cutting expensive sheet goods. If your main concern is leaving a clean finished edge on laminated or melamine-faced material, this blade makes more sense than a general-purpose blade. It is not the blade to buy for every material in the shop. It is the blade to buy when surface finish matters enough that chipped edges cost time and money.
Built for Clean Panel Work
This blade is meant for finished sheet goods where chip-out is the whole problem. The tooth count, grind, and carbide package are aimed at leaving edges you can use right off the saw.
- 64-tooth design for fine finish cutting
- Triple Chip Grind tooth pattern helps reduce chipping in laminate and melamine
- Recommended for laminate, melamine, plywood, OSB, and chipboard
Runs Smoother on the Saw
Finish blades only help if they stay stable in the cut. Freud's anti-vibration slot design is there to calm the blade down and keep the cutting edge tracking where it should.
- Laser-cut anti-vibration slots reduce vibration and sideways movement
- Perma-SHIELD coating reduces drag and helps resist pitch build-up and corrosion
- Maximum speed rating of 9,000 RPM
What's in the Box
- (1) Freud LU97R008 8 in. Double Sided Laminate/Melamine Blade
Key Specifications
| Diameter | 8 in. |
|---|---|
| Tooth Count | 64 |
| Arbor Size | 5/8 in. |
| Kerf | 0.126 in. |
| Plate Thickness | 0.087 in. |
| Hook Angle | -3° |
| Maximum Material Thickness | 1-5/8 in. |
| Maximum RPM | 9,000 RPM |
| Grind Type | Triple Chip Grind (TCG) |
| Blade Material | Carbide |
| Weight | 1.3 lbs |
| Made In | Italy |
Compatibility
Built For
Pro Tip
If you're cutting prefinished laminate or melamine regularly, keep the Freud LU97R008 dedicated to those sheet goods instead of bouncing it between rough stock and finish work. That helps preserve the edge quality this blade is built for, and Freud specifically notes that no scoring blade is needed with this setup.
Warranty & Support
Tool Nut's Take
Freud LU97R008 8 in. Double Sided Laminate/Melamine Blade is a shop blade, not a catch-all blade
If clean laminate and melamine cuts pay the bills, this is the kind of blade that saves rework fast.
- Who it's for: Cabinet shops, installers, finish carpenters, and serious DIY users cutting finished panels where both faces need to stay clean.
- Why it stands out: The 64-tooth Triple Chip Grind layout, TiCo carbide, anti-vibration slots, and Perma-SHIELD coating are all aimed at one result: cleaner cuts and longer life in abrasive sheet goods.
- Worth knowing: This is a specialized laminate and melamine blade. If you want one blade for framing lumber, hardwood, sheet goods, and metal, this is not that blade.
Common Questions
- What materials is this blade designed to cut? It is designed for double-sided laminate, melamine, and veneered plywood, and plywood, OSB, and chipboard are also suitable materials.
- What arbor size does it use? This blade has a 5/8 inch arbor.
- Can it be used for non-ferrous metal cutting? No. Non-ferrous cutting is not recommended.
- What is the maximum speed rating? The maximum blade speed is 9,000 RPM.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

