The Heat Wave Visual Performance Rayth Sunglasses: Anti Fog Clear Lens Z87+ are protective performance sunglasses built for clear vision, impact resistance, and better side coverage in active work environments. This is a pair of safety sunglasses designed for eye protection in debris-heavy, high-movement conditions. Model Number: E_RAYTH_07A. If you need clear-lens jobsite eyewear that does more than just look good, this is the setup aimed at keeping your vision open while staying comfortable on your face.

The big selling point here is the anti-fog lens treatment. Heat Wave uses anti-fog coating on both sides of the clear lens, and the product data states the glasses are designed to remain fog free when properly cared for. That matters if you move between cool and warm environments, wear face coverings or helmets, or work hard enough to steam up ordinary lenses. Clear vision is not a luxury when you're cutting, grinding, or working around moving equipment. It is the difference between staying accurate and working half blind.

Protection is not limited to the front lens. The 2 mm thick polycarbonate lens meets or exceeds ANSI Z87 mass impact requirements, and the Quick-Latch side-shield system adds lateral protection from debris and unwanted side light. With the side shields installed, the product meets ANSI Z87+ standards. That gives this pair a more job-ready edge than casual clear-lens eyewear that leaves the sides exposed.

The Rayth frame itself is built around a bold, flatter profile with a standard-width fit and a more compact top-to-bottom shape. In plain terms, that means you get a wide, squared-off look without an oversized frame sitting too tall on the face. Heat Wave also calls out the premium fit details, and the design backs that up with modified arms that include rubber inserts to reduce wear points and help prevent hair snags. That sounds small until you've worn glasses all day and start noticing every little annoyance.

Comfort and retention matter just as much as impact protection, especially if you are bending, climbing, or moving quickly. The Rayth uses increased rubber surface area at the nose for more grip, which helps the frame stay put instead of sliding down as the day goes on. The beveled emblems, arm inserts, and nose contact points are not just there for looks. They help turn a sharp-looking frame into something you can actually work in.

The clear lens is rated UV400 for 100% UVA and UVB blocking, with VLT 88% and Category 0 light transmission. That makes this version especially useful indoors, in the shop, at night, in low-light tasks, or any time you need impact-rated eye protection without tint darkening your view. It is a good fit for grinding, fabrication, maintenance, and general shop use where hazards are real but lighting conditions do not call for a smoke lens.

If you want protective eyewear that bridges the gap between safety glasses and lifestyle sunglasses, this is exactly the lane the Rayth sits in. It is best for users who care about ANSI-rated coverage, want anti-fog performance, and prefer a more substantial frame shape over thin disposable shop glasses. If you need all-day clear-lens protection with side coverage and a stronger fit, this is the version to look at.

Heat Wave Visual Performance Rayth Sunglasses: Anti Fog Clear Lens Z87+ are for people who actually wear their safety glasses

This pair makes a strong case for itself if you are tired of flimsy shop glasses that fog up, slide around, and leave the sides exposed.

• Who it's for: Anyone doing grinding, fabrication, shop work, or general jobsite tasks who wants clear-lens ANSI-rated eye protection with better fit and a more substantial frame.
• Why it stands out: The anti-fog treatment, 2 mm polycarbonate lens, and Quick-Latch side shields give it real functional value beyond style.
• Worth knowing: Anti-fog coatings need proper care, and this version gets its ANSI Z87+ side protection with the shields installed.

• Are these impact rated? Yes. The 2 mm polycarbonate lens meets or exceeds ANSI Z87 mass impact requirements, and the glasses meet ANSI Z87+ with the side shields installed.
• Are these good for indoor use? Yes. The clear anti-fog lens has 88% visible light transmission and a Category 0 rating, which makes it well suited for indoor, night, or low-light work.
• Do they block UV light? Yes. The lenses are rated UV400 and block 100% of UVA and UVB light.
• How should the lenses be cleaned? The product data says extra care should be taken with the anti-fog coating and that only the provided microfiber should be used to clean the lenses.