Klein Molding Bar with Nail Dimpler, 10-in. (66101)
Klein Molding Bar with Nail Dimpler, 10-in. (66101)
Out of Stock - Available to Order - Usually ships in 15-20 days
Product Details
Product Details
Key Features
Overview
The Klein Tools Molding Bar with Nail Dimpler, 10-Inch (66101) is a compact pry bar for trim carpentry and finish demolition. This is a molding bar designed for removing nails, trim and molding with minimal damage to the surrounding drywall, plaster or casing, so the trim can be reused and the wall needs less patching.
The nail dimpler is what sets it apart from a basic flat bar. Built into the side of the bar, it is used to expose embedded and hard-to-reach nails, including nails that are set below the surface or broken off flush, so the claw can get underneath and pull them.
The claws are sharp and precision ground. A thin, sharp claw slips behind trim and under nail heads without gouging, which reduces splintering and minimizes damage around the removal area.
The shock-absorbing, vibration-dampening TPR grip adds comfort when you hammer the bar behind trim or pull stubborn nails. The bar is hardened carbon steel with a corrosion-resistant matte coating in black and orange. It is 10" (25.4 cm) long, about 2-15/16" (7.4 cm) wide at the head with a 3/4" (1.9 cm) tip, and weighs 13.8 oz (391 g).
Who should buy it: finish and trim carpenters, remodelers, flooring installers pulling baseboard, electricians removing casing to run wire, and homeowners renovating rooms who want to save the original trim.
Get Under Buried Nails
Use the side dimpler to expose a buried or flush nail head, then pull it with the claw.
- Nail dimpler on side of bar
- For embedded and hard-to-reach nails
Save the Trim
A precision-ground claw slides behind molding without crushing the wall or splitting the trim.
- Precision-ground claw
- Sharp claws reduce splintering
- 3/4" (1.9 cm) tip
Easy on the Hands
The shock-absorbing grip dampens vibration when you drive the bar in behind trim.
- Shock-absorbing TPR grip
- Vibration dampening
- Hardened steel with corrosion-resistant coating
Key Specifications
| Type | Molding bar |
|---|---|
| Length | 10" (25.4 cm) |
| Width | 2-15/16" (7.4 cm) |
| Tip Size | 3/4" (1.9 cm) |
| End | Claw |
| Special Features | Nail dimpler, shock-absorbing grip |
| Material | Hardened carbon steel, TPR grip |
| Finish | Matte, corrosion-resistant |
| Weight | 13.8 oz (391 g) |
Built For
Pro Tip
Slip a putty knife or shim behind the bar's claw before you pry against drywall. The bar does the lifting, the shim spreads the pressure, and the wall stays intact.
Tool Nut's Take
The Trim Bar With a Trick for Buried Nails
The Klein Tools Molding Bar with Nail Dimpler, 10-Inch (66101) pulls trim cleanly and digs out nails other bars cannot reach.
- Who it's for: Trim carpenters, remodelers and flooring installers removing molding they want to reuse.
- Why it stands out: Side-mounted nail dimpler, precision-ground claws and a shock-absorbing grip.
- Worth knowing: At 10", it is a finesse bar for trim and nails, not a demolition bar for framing.
Common Questions
- What is the nail dimpler on the Klein 66101 for? It exposes embedded and hard-to-reach nails so the claw can pull them.
- How long is the bar? 10" (25.4 cm).
- Can I hammer on it? Yes. The shock-absorbing grip is designed for comfort when pulling and hammering.
Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
