Knipex Crimping Pliers (97 21 215)
Knipex Crimping Pliers (97 21 215)
Out of Stock - Available to Order - Usually ships in 12-18 days
Product Details
Product Details
Key Features
Overview
Knipex 97 21 215 Crimping Pliers is a multi-function hand tool for electrical work that combines cable cutting, wire stripping, and terminal crimping in one compact layout. This is a crimping pliers designed for wire preparation and terminal installation. Model Number: 97 21 215. For electricians, maintenance techs, and anyone doing repeated wire terminations, that combination saves time and keeps the tool loadout simple.
The big draw here is how much work the tool covers before you ever reach for a second pair of pliers. It cuts cable, strips wire from 0.75 to 6.0 mm², and forms an oval crimp with three crimping positions. In real use, that means you can prep the conductor, fit the terminal, and finish the connection without switching stations at the bench or digging through the bag on a service call.
Knipex also built in threaded holes for cutting copper and brass screws in sizes 7/64 in, 1/8 in, 9/64 in, 5/32 in, and 13/64 in, which correspond to M2.6, M3, M3.5, M4, and M5. That is a practical feature if you trim machine screws for device mounting or terminal hardware and want cleaner results than hacking them off with side cutters. You get a controlled cut that helps preserve the thread instead of flattening it.
The tool body is made from high strength special steel with a black-oxide finish, and the joint is bolted for higher stability and smooth movement. That matters on a tool like this because crimping consistency depends on alignment and control. A loose-feeling pivot makes hand tools frustrating fast. The bolted joint helps the action stay predictable, especially when the tool is doing more than one job.
The multi-component handle gives you a more secure grip than bare dipped handles, which is helpful when you are stripping or crimping repeatedly through the day. At 9 1/4 inches overall and about 0.63 lb, it has enough length for usable leverage without feeling oversized in a pouch or on a bench. It is not a 1,000-volt insulated tool, so it is built for properly de-energized work where you want function and efficiency more than insulated-tool compliance.
Where this tool makes the most sense is electrical installation, panel work, service calls, automotive wiring, and general repair work where you are handling stranded or solid wire and common connectors. If you want one dedicated electrical hand tool that covers cutting, stripping, crimping, and screw cutting without getting bulky, this Knipex crimper earns its spot. If you need ratcheting crimp force or insulated live-work protection, step up to a more specialized tool. But for day-in, day-out prep and termination work, this one is a smart, efficient carry.
Strip Wire Without Guesswork
The marked stripping section helps you match the notch to the conductor size and remove insulation cleanly. That gives you a better shot at consistent prep before the terminal goes on.
- Stripping capacity: 0.75 to 6.0 mm²
- Built to handle wire prep and crimping in one workflow
Trim Screws to Length Cleanly
The threaded screw-cutting holes are one of those features you appreciate the second you need them. Instead of crushing small copper or brass screws with a cutter, you shorten them in the proper hole and keep the job moving.
- Cuts copper and brass screws from M2.6 through M5
- Useful for device mounting, terminals, and small hardware adjustments
Knipex 97 21 215 Crimping Pliers Keeps It Simple
This is the kind of hand tool that earns a permanent spot because it covers the basics well. It is long enough for leverage, compact enough for everyday carry, and laid out so the different functions are easy to identify.
- Overall length: 9 1/4 in
- Weight: 0.63 lb
Key Specifications
|
|
9 1/4 in |
|---|---|
|
|
0.63 lb |
|
|
High strength special steel |
|
|
Multi-component |
|
|
0.75 to 6.0 mm² |
|
|
3 |
|
|
Oval crimp |
|
|
Bolted |
Built For
Pro Tip
Use the stripping notch that matches the conductor size instead of forcing the next one up. You will nick fewer strands, and if you need to shorten a copper or brass machine screw for the install, use the threaded cutter holes before final assembly so the threads stay cleaner.
Warranty & Support
Tool Nut's Take
A smart everyday electrical hand tool
The Knipex 97 21 215 Crimping Pliers is the kind of no-nonsense tool that makes sense for anyone who wants to cut, strip, crimp, and trim screws without juggling three different pliers.
- Who it's for: Electricians, maintenance crews, automotive techs, and serious DIY users doing regular wire termination work.
- Why it stands out: It packs real utility into one compact tool, and the screw-cutting holes plus the bolted joint make it more useful than a basic wire stripper.
- Worth knowing: This is not a ratcheting crimper and it is not 1,000-volt insulated, so buy it for efficient bench and field prep work, not for jobs that call for insulated live-work tools.
Common Questions
- What does this tool do? It is built for cutting cable, stripping wire, crimping terminals and cable connectors, and cutting copper and brass screws to length.
- What wire sizes can it strip? The listed stripping capacity is 0.75 to 6.0 mm².
- How many crimping positions does it have? It has 3 crimping positions and uses an oval crimp profile.
- Is it an insulated 1,000-volt tool? No. The listed specification says 1,000 volt insulated: No.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


