The Kreg 20V Ionic Drive 6-1/2" Plunge-Cut Track Saw (Tool Only) is a cordless plunge-cut track saw built for straight, clean cuts in sheet goods, plywood, and solid wood. This is a plunge-cut track saw designed for guided cutting, panel breakdown, and finish-quality rip and crosscuts. Model Number KPTPS100A. If you already work in the Kreg 20V Ionic Drive system and want track-saw accuracy without a cord, this is the tool aimed right at that job.

What makes this saw matter is the combination of cordless freedom and track-guided accuracy. Paired with the Kreg 62 inch Guide Track, it is built to deliver smooth, splinter-free cuts in sheet goods and hardwood panels. The 6-speed brushless motor gives you speed control for different materials, which is useful when you move from veneered plywood to thicker hardwood and want better cut quality instead of forcing one fixed speed on everything.

Kreg includes a 6-1/2 inch, 40-tooth, carbide-tipped thin kerf blade with a 1.6 mm kerf. In plain terms, that thinner kerf helps the saw cut efficiently while the 40-tooth count supports cleaner results than a rough framing blade would. For cabinet work, built-ins, shelving, and trim panels, that is the difference between a cut that is ready to use and one that needs cleanup.

The cutting capacity is strong for a saw in this class. You get up to 2-1/8 inches at 90 degrees and 1-1/2 inches at 45 degrees, plus a bevel range from -1 degree to 47 degrees. That gives you enough range for standard straight cuts, bevel work, and a little extra adjustment when you need to fine-tune fit on finished pieces. For remodelers and woodworkers, that extra bevel range is not filler. It gives you more flexibility on real installs.

Kreg also paid attention to visibility and control. The blade-left design is optimized for right-hand users, which improves sightlines to the cut path. On a track saw, seeing exactly where the blade is working helps you stay confident when you are trimming doors, breaking down expensive sheet stock, or sneaking up on a finish dimension. The plunge action and guided base are both about control first, not brute force.

Safety and jobsite practicality are better than what you get from a basic circular saw setup. The blade is fully shrouded and retracts when not in use. A riving knife helps keep the kerf open to reduce binding, the electronic blade brake stops the blade faster after the cut, and the selectable anti-kickback control adds another layer of confidence when you are making plunge cuts on a guide track. There is also a dust bag and a dust port for cleaner work and vacuum hookup, which matters when you are cutting indoors or trying to keep a shop space under control.

This saw is part of the Kreg 20V Ionic Drive platform and is sold as a bare tool, so no battery or charger comes in the box. That makes the most sense for users who already own compatible Kreg 20V power sources and want to add a dedicated track saw to the lineup. It is also designed for use with the Adaptive Cutting System 62 inch Guide Track, which is the setup that unlocks the saw's real advantage over a standard cordless circular saw.

Who should buy it? This is a smart fit for cabinet installers, finish carpenters, remodelers, jobsite woodworkers, and serious DIY users who cut a lot of plywood or want cleaner, more predictable cuts than a straightedge-and-circular-saw setup usually delivers. If your work involves sheet goods, built-ins, closet systems, shelving, or trim panels, the Kreg 20V Ionic Drive 6-1/2" Plunge-Cut Track Saw (Tool Only) solves a real problem: portable precision cutting without dragging out a bigger stationary saw.

Kreg 20V Ionic Drive 6-1/2" Plunge-Cut Track Saw (Tool Only) is the right move when you want panel saw accuracy without a cord

This is a purpose-built cordless track saw that makes a lot more sense than trying to fake the same result with a standard circular saw and a clamp-on straightedge.

• Who it's for: Woodworkers, remodelers, cabinet installers, and serious DIY users cutting plywood, sheet goods, and finish panels on site or in the shop.
• Why it stands out: You get a brushless 6-speed motor, a useful 2-1/8 inch cut depth at 90 degrees, bevel range to 47 degrees, and a safety package that includes a riving knife, electronic brake, and anti-kickback control.
• Worth knowing: This is a bare tool, so plan on adding a compatible Kreg 20V battery and charger if you are not already on the platform. To get the real benefit, use it with the Kreg 62 inch Guide Track.

• What kind of tool is this? This is a cordless plunge-cut track saw designed for guided straight cuts, panel breakdown, bevel cuts, and clean finish work in wood and sheet goods.
• What is the maximum cutting depth? The saw cuts up to 2-1/8 inches deep at 90 degrees and 1-1/2 inches deep at 45 degrees.
• Does it bevel? Yes. It has a bevel range from -1 degree to 47 degrees.
• Is this saw meant to be used with a guide track? Yes. It is designed to work with the Kreg 62 inch Guide Track for straight, smooth, splinter-free cuts.
• Does it include battery and charger? No. This is a tool-only version and requires a compatible Kreg 20V Ionic Drive battery and charger sold separately.