The Kreg 7-1/4-in. SureCut General Purpose 24-Tooth Saw Blade is the rough-and-ready blade in the SureCut lineup, built for framing, plywood breakdown, and dimensional lumber where speed matters more than a glass-smooth edge. Model number KSB725GP24. This is the blade you mount for demo, framing, and general construction — the everyday cutting that makes up most of a jobsite's blade wear.

With only 24 teeth on a 7-1/4 in. plate, each carbide tip is larger and clears more material per rotation than a fine-finishing blade's teeth do. That's a deliberate tradeoff: fewer teeth means a slightly rougher edge, but it also means less resistance, less heat buildup from friction, and a faster feed rate through thick or resinous material like framing lumber and construction-grade plywood. For rough carpentry, that tradeoff is exactly right.

The anti-stick coating matters just as much here as on the finishing blades in this line, arguably more — framing lumber and construction plywood tend to carry more pitch and resin than kiln-dried finish stock, and a blade doing heavy ripping work generates more heat. Keeping the plate coated slows the buildup that causes binding and burning during long cuts. The anti-vibration relief cuts do their job under load: a blade working hard through thick stock is under more stress than one making light finish cuts, and the relief-cut body keeps that stress from turning into wander or chatter.

This blade uses a 5/8 in. arbor and 1.5 mm kerf — the standard fit for the large majority of 7-1/4 in. circular saws on the market, corded and cordless.

Who should buy this: framers, general contractors, remodelers, and DIYers doing rough construction, demo, and general building where cutting speed and durability under load matter more than finish quality. If the cut is going to be seen — trim, cabinetry, finish carpentry — step up to the 40-tooth finishing blade or the 60-tooth ultra-fine blade in this same line instead.

The workhorse blade for the jobsite, not the showroom

24 teeth means speed — this is the blade for framing and demo, not for a cut anyone's going to look at closely.

• Who it's for: Framers and general contractors who need a fast, durable blade for everyday rough construction.
• Why it stands out: Larger carbide teeth for faster feed rates, anti-stick coating for heavy pitch and resin, relief cuts for stability under load.
• Worth knowing: It's genuinely a rough-cut blade — for trim and cabinetry, Kreg's 40-tooth or 60-tooth SureCut blades will leave a much cleaner edge.

• What's this blade best used for? Framing lumber, plywood breakdown, and general construction cuts where speed matters more than finish quality.
• Will this leave a smooth edge on trim? It's optimized for cutting speed, not fine finish — for trim and cabinetry, the 40-tooth or 60-tooth blades in this SureCut line are the better choice.
• What arbor size does it use? 5/8 in., standard on most 7-1/4 in. circular saws.