Kreg KMS7723 12' Self-Adhesive Measuring Tape (R-L Reading) is a replacement or add-on measuring scale for Kreg track systems and shop setups that need a clear right-to-left layout. This is a self-adhesive measuring tape designed for measuring and setting repeatable stops on fence and track systems. Model Number: KMS7723. If you are building or upgrading a cutting station, this tape gives you an easy way to add readable measurements exactly where you need them.

The main draw here is that this tape is made to fit Kreg Top Trak and HD Trak. That matters because you are not guessing at width or trying to force a generic tape into a groove it was not designed for. The 1/2 inch width fits snugly into the indentation on the topside of those systems, which helps the tape sit cleanly and stay readable over time.

The right-to-left reading format is the detail that makes or breaks this kind of accessory. If your stop setup references measurements from the opposite direction, using the wrong tape turns every cut into a double-check. This version keeps the scale moving in the direction your station is designed around, so measurements make sense at a glance and repeat cuts go faster.

Kreg uses a metallic, highly scuff-resistant tape body here, which is important in a shop environment where fences, workpieces, clamps, and offcuts are constantly sliding across the surface. A measuring scale that rubs off or becomes hard to read is useless pretty quickly. The scuff-resistant finish helps the markings hold up under regular use.

Installation is straightforward thanks to the self-adhesive backing. Once the surface is clean and positioned correctly, you can apply the tape without separate fasteners. It can also be trimmed with scissors, which is useful if you are fitting it to a shorter section, replacing only part of an existing scale, or dialing in a custom jig or bench setup.

For buyers comparing options, this is not a general pocket tape measure. It is a shop accessory meant for fixed measuring stations where repeatability matters more than portability. Accuracy is listed at 1/16 inch, which is right in line with the kind of work most woodworkers, cabinet installers, and bench-builders need from a fence-mounted scale.

This Kreg measuring tape is best for woodworkers, cabinet shops, and serious DIY users who already run Kreg Top Trak or HD Trak and need a proper right-to-left scale. If that matches your setup, this is the clean solution. If your station reads in the other direction, you will want the left-to-right version instead.

Kreg KMS7723 12' Self-Adhesive Measuring Tape (R-L Reading) gets the small details right

This is the kind of shop accessory that is easy to overlook until you need clean, repeatable measurements every day.

• Who it's for: Woodworkers, cabinet builders, and bench-builders using Kreg Top Trak or HD Trak with a right-to-left measuring layout.
• Why it stands out: Proper fit, readable right-to-left scale, and a scuff-resistant metallic surface make it more dependable than trying to adapt a generic tape.
• Worth knowing: This is a fixed-station measuring accessory, not a handheld tape measure, so make sure your setup needs right-to-left reading before you buy.

• What is this product used for? It is a self-adhesive measuring tape for fixed measuring stations, fences, and stop systems, especially on Kreg trak setups.
• Which Kreg systems does it fit? Source data states that it is compatible with Kreg Top Trak and HD Trak.
• Can it be cut to length? Yes. The tape can be trimmed with scissors.
• What direction does it read? This KMS7723 version reads right-to-left.