The Kreg Tool PRS1015 Precision Router Table Fence is a router table fence built for accurate fence positioning, repeatable routing setups, and cleaner edge work on a router table. This is a router table fence designed for precise routing, edge profiling, and jointing tasks. Model Number: PRS1015. If you are tired of fighting a fence that drifts out of parallel or takes too long to dial in, this setup is aimed right at that problem.

The big selling point here is the table saw-style T-square self-squaring carriage. Instead of nudging both ends and hoping the fence lands where you want it, the carriage keeps the fence parallel to the miter-gauge slot as you move it. That matters when you are cutting joinery, trimming to a line, or making repeat passes where a small error shows up fast in the finished work.

Kreg also gives this fence a magnified measuring system with an adjustable measuring scale, plus an included micro-adjuster. In plain terms, that means easier fine-tuning with different bit sizes and less guessing during setup. When a profile bit, straight bit, or rabbeting bit needs a very specific position, the micro-adjuster helps you sneak up on the cut instead of moving the whole fence too far in one shot.

The anodized-aluminum fence body is built for rigidity without making the system overly heavy. At 6.5 lbs assembled, it is substantial enough to feel planted but still practical for a custom table build or an upgraded shop setup. Dual locking points add to that solid feel: a large paddle lock on the infeed end and a quarter-turn lock on the outfeed end to help prevent fence deflection.

Independent sliding fence faces are another feature that matters more than it sounds on paper. You can move the faces in close to the bit for better workpiece support, which helps especially on narrow stock and detail work. Those adjustable faces also help direct chips toward the built-in dust port, so the fence is not just guiding the cut, it is also helping keep the table cleaner while you work.

There is also a built-in jointing function using the included jointing rods. Slide the rods into position behind the outfeed fence face and the fence can serve as a jointer-style setup for straightening board edges. That is a practical shop feature for woodworkers who want to get more out of a router table without dedicating space to another machine.

Compatibility is straightforward and useful. The single-side universal mounting design is made to attach securely to most router table tops from 3/4 in. to 1-1/2 in. thick, and it fits 1 in. thick tables without modification. Kreg notes that the router bit hole must be located 16 in. from the right side of the table, so that is the key measurement to confirm before installation. It can be paired with the Kreg Precision Router Table Top and Kreg Multi-Purpose Shop Stand, or used on a shop-built table.

This fence makes the most sense for woodworkers, cabinet builders, furniture makers, and serious DIY users who want more accuracy from a router table setup. If your work involves repeatable profiling, dadoes, rabbets, edge work, or light jointing, the PRS1015 gives you the kind of adjustment and stability that saves setup time and cuts down on test passes.

Why the Kreg Tool PRS1015 Precision Router Table Fence earns its spot

This is the kind of router table fence that makes a good table feel like a serious workstation instead of a compromise.

• Who it's for: Woodworkers and cabinet guys who want more precise router table setups, cleaner repeatability, and the ability to do light jointing without adding another machine.
• Why it stands out: The self-squaring T-style carriage and micro-adjuster solve the part that usually wastes time, getting the fence exactly where you want it and keeping it there.
• Worth knowing: Check your table thickness and the 16-inch bit-hole location before buying. If your table is 1 inch thick, you are in the sweet spot.

• What type of product is this? This is a router table fence for positioning and guiding workpieces during routing operations.
• Will it fit most router table tops? Yes. The universal mounting design is made for most tops from 3/4 in. to 1-1/2 in. thick, and it fits 1 in. thick tables without modification.
• Does it support dust collection? Yes. The fence includes a built-in dust-collection port.
• Can it be used for jointing edges? Yes. It includes jointing rods that let the fence double as a jointer-style setup for straight edges on boards.