The Laguna MLAREVO 1836-220 18|36 REVO Lathe - 2HP 220V is a full-size variable speed wood lathe built for serious turning work in a home shop, custom furniture shop, or professional woodworking setup. This is a wood lathe designed for bowl turning, spindle turning, and general woodturning. Model Number MLAREVO 1836-220. If you want the capacity of a real floor lathe with the control needed for clean finishing cuts, this machine is aimed squarely at that buyer.

Its 2 horsepower, 220 volt motor is paired with a Delta S1 variable frequency drive that converts single-phase input to three-phase output. In plain terms, that matters because you get electronic variable speed with strong low-speed performance instead of a machine that feels weak when the diameter goes up. The low range runs from 50 to 1300 RPM, and the high range runs from 135 to 3500 RPM, giving you room for slow, controlled starts on larger stock and enough top-end speed for smaller work and finish passes.

Capacity is what sells a lathe like this, and the numbers here are useful in the real world. You get an 18 inch swing over the bed, 36 inches between centers, and 13-1/2 inches over the banjo. That makes it practical for bowl blanks, table legs, chair parts, tool handles, decorative spindle work, and a lot of one-off turning jobs that smaller midi lathes simply cannot handle. If you expand with the optional extension kit, maximum outboard swing reaches 32 inches.

Laguna did not stop at raw specs. The REVO 18|36 uses a steel bed made from ASTM A36 steel, and Laguna specifically calls out the smooth travel of the cast iron headstock on that bed. That combination matters because headstock movement and locking should feel solid, not sloppy. The ergonomic angled control panel, anodized aluminum construction, digital RPM readout, and knurled control knob with rubber grip all point to a machine designed to be adjusted constantly without wearing out the user.

On the setup side, the spindle is 1-1/4 inch x 8 TPI right-hand thread with a number 2 Morse taper, and the tailstock uses a number 2 Morse taper as well. Those are practical, shop-friendly standards for many popular woodturning accessories and centers. The headstock and tailstock both have a 5/8 inch through-bore, the tool rest post size is 1 inch, and the spindle indexing positions are 14, 36, and 48 with lock. That gives the machine useful flexibility for accessory fitment, indexing work, and repeatable setups.

Jobsite practicality is not really the point with a 570 pound floor lathe, but shop practicality absolutely is. The quick-release handle makes range changes easier, the lock handles are positioned at the back to keep the front work area cleaner, and the cam-lock handle design is there to give a firm lockup with less fuss. The totally enclosed fan-cooled induction motor is also the right kind of motor for a machine that may live around fine dust in a woodworking shop.

Who should buy it? This machine makes the most sense for serious woodturners who have outgrown smaller benchtop lathes, furniture makers who need spindle capacity without sacrificing bowl work, and dedicated hobbyists who want a long-term shop centerpiece instead of a stepping-stone machine. If your work regularly includes larger blanks, longer spindles, or you simply want smoother speed control and a more substantial platform, this REVO is the kind of upgrade you feel every time you turn it on.

Laguna MLAREVO 1836-220 18|36 REVO Lathe - 2HP 220V Is the Real Step-Up Machine

This is the kind of lathe you buy when you are done compromising on capacity, torque, and smooth control.

• Who it's for: Woodturners, furniture makers, and dedicated hobbyists who need more than a midi lathe can offer.
• Why it stands out: The 2 HP motor, VFD-driven variable speed, 18 inch swing, and 36 inch between-centers capacity hit a sweet spot for serious turning without jumping into oversized industrial territory.
• Worth knowing: This is a 220 volt floor lathe that weighs 570 pounds, so plan your shop space and power ahead of time. It is not a casual starter machine, and that is exactly why the right buyer will appreciate it.

• Is this a variable speed lathe? Yes. It uses a Delta S1 variable frequency drive with two speed ranges: 50 to 1300 RPM and 135 to 3500 RPM.
• What power does it require? The lathe is rated for 220 volt, 60 Hz power and uses a 6-15P plug. The recommended breaker is 15 amp.
• What is the spindle size? The spindle size is 1-1/4 inch x 8 TPI right-hand thread, and the spindle taper is number 2 Morse taper.
• Can it handle outboard turning? Yes. Maximum outboard swing is listed at 32 inches with the optional 20 inch extension kit installed.