The Milwaukee 2573-22 M12 FORCE LOGIC Press Tool Kit w/ ONE-KEY with 1/2 in. - 1 in. CTS-V Jaws is a cordless press tool kit built for plumbers, mechanical contractors, service techs, and remodelers who need fast, repeatable pipe connections in tight spaces. This is a press tool designed for making pipe connections on copper, PEX, black iron pipe, stainless steel, and ACR systems. Model Number 2573-22. The big draw here is simple: you get the portability of the M12 platform, an in-line body that fits where larger tools struggle, and the tracking and reporting benefits of ONE-KEY.

On the job, the in-line layout is what separates this tool from a lot of bulkier press tools. Milwaukee built it so you can work nearly anywhere you can fit your arm, which matters when you are pressing installed pipe between framing, above ceilings, behind fixtures, or in mechanical rooms with no room to swing a larger tool. The 180-degree rotatable head helps line the jaw up to the fitting without fighting the tool, and the easy-opening jaw design supports one-handed use when the other hand is busy steadying pipe or keeping your balance on a ladder.

The Milwaukee M12 FORCE LOGIC press tool also focuses on consistency, not just access. Auto-Cycle is there to make sure each press runs through a full cycle, and the visual indicator lets you know when the cycle is complete. Milwaukee also adds a pre-press battery check, which is one of those features that sounds small until it saves you from starting a press you cannot finish. For pros doing repeated copper pressing or service calls, that means fewer interruptions and more confidence in each connection.

From a service and fleet standpoint, the ONE-KEY side of this tool matters just as much as the mechanics. You can track, manage, and report tool use, and the time-stamped data logs are useful for documentation and maintenance records. If you run multiple crews or need better control over where your press tools are and how they are being used, this is a smarter setup than a basic cordless press tool with no connected platform.

This kit is built around the Milwaukee M12 battery system, so it fits shops already running M12 batteries and chargers across service, fastening, cutting, and inspection tools. That keeps your van loadout simpler. Milwaukee states compatibility with all M12 batteries and chargers, and this kit includes two M12 REDLITHIUM CP2.0 battery packs and an M12 charger, so you are not starting from scratch. The included 1/2 inch, 3/4 inch, and 1 inch CTS-V press jaws make this a ready-to-work kit for common copper press applications right out of the case.

Material compatibility is broad for a compact press tool. Milwaukee lists BIP, copper, stainless steel, ACR, and PEX compatibility when used with the appropriate Milwaukee press jaws and fitting systems. Maximum listed capacity is 1-1/4 inches for copper pipe and 1-3/8 inches for ACR pipe. That gives the tool useful range for service work, residential plumbing, and a good amount of light commercial work without stepping up to a larger platform.

Jobsite practicality is another strong point. Milwaukee rates the tool for 37,000 press cycles between service inspections, which tells you this is built for real use, not occasional homeowner work. The included carrying case also matters more than it sounds like it should. A press tool, jaws, batteries, and charger turn into an expensive mess fast if they are bouncing around loose in a truck. Keeping the kit organized protects the investment and saves time when you are moving from call to call.

Who should buy it? If you are a plumber or mechanical contractor who wants a compact cordless press tool for installed pipe, service work, punch lists, and everyday copper pressing, this kit makes a lot of sense. If you already run M12, it makes even more sense. If your work regularly pushes larger diameter pipe all day, you may still want a bigger press platform for those jobs. But for access, portability, and smart tool management, this is a very practical setup.

Milwaukee 2573-22 M12 FORCE LOGIC Press Tool Kit Gets Into Places Bigger Press Tools Do Not

If access matters more than brute size, this is one of the smartest cordless press tool kits you can put on a truck.

• Who it's for: Plumbers, HVAC techs, and service crews who need a compact press tool for copper and other supported pipe systems in tight installed spaces.
• Why it stands out: The in-line design, 180-degree rotatable head, Auto-Cycle function, and ONE-KEY tracking make it practical on the pipe and useful back at the shop.
• Worth knowing: This kit is ready for common CTS-V copper work with 1/2 in., 3/4 in., and 1 in. jaws, but larger dedicated press tools may still make more sense if your day is mostly bigger diameter pressing.

• What battery platform does this press tool use? It runs on the Milwaukee M12 battery platform and is compatible with all M12 batteries and chargers.
• What materials can this tool work on? Milwaukee lists compatibility with BIP, copper, stainless steel, ACR, and PEX when used with the correct Milwaukee press jaws and fitting systems.
• Does this tool support tracking and reporting? Yes. It is ONE-KEY enabled for tracking, management, lockout, and time-stamped data logging.
• What is the maximum pipe size? Milwaukee lists a maximum copper pipe size of 1-1/4 inches and a maximum ACR pipe size of 1-3/8 inches.