Milwaukee 2584-22CX M12 FUEL 6-in. Random Orbital Sander (3/32-in.) with ROVER 700-Lumen Flood Light 2.5Ah / 5.0Ah Combo Kit
Milwaukee 2584-22CX M12 FUEL 6-in. Random Orbital Sander (3/32-in.) with ROVER 700-Lumen Flood Light 2.5Ah / 5.0Ah Combo Kit
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Milwaukee 2584-22CX M12 FUEL 6" Random Orbital Sander (3/32") with ROVER 700-Lumen Flood Light 2.5Ah / 5.0Ah Combo Kit pairs Milwaukee's fine-finish cordless sander with a magnetic M12 work light for collision repair, paint prep, and refinishing. This is a cordless 6" random orbital sander designed for clear coat removal and primer sanding, bundled with a compact LED flood light on the same 12V battery. Model Number 2584-22CX-PROMO 2367-20 combines the Milwaukee 2584-22CX sander kit with the Milwaukee 2367-20 ROVER service and repair flood light.
Milwaukee designed this sander for the professional paint technician. The 3/32" orbit is the fine-finish throw: small enough to leave a paint-ready surface on primer, with enough cut to take down clear coat with confidence. The palm grip, speed dial, and variable-speed feathering trigger work together so you can ease into a cut on an edge or body line instead of hitting the panel at full speed. Speed runs from 3,200 to 12,000 RPM.
The POWERSTATE brushless motor and REDLINK PLUS intelligence are what let you sand clear coat at low RPM without the pad stopping. That is the setting that matters when you are trying not to burn through on an edge. Milwaukee rates the sander at up to five doors of sanding on a single M12 REDLITHIUM HIGH OUTPUT CP2.5 battery, and this kit adds a larger XC5.0 pack for longer stretches between charges.
Two details make daily use easier. A tool-free backing pad change means no wrench and no stress on the spindle when you swap between the included soft hook-and-loop and soft PSA pads. Milwaukee pairs the tool with its 6" soft backing pad to balance vibration control with the preferred removal rate on clear coat. An isolation system secures the battery connection and limits the vibration transmitted to the pack, and the vacuum port can be set on the left or right side to suit your extraction setup.
The ROVER is one of the most useful Milwaukee lights for body work. It puts out 700 lumens of TRUEVIEW high definition light, runs up to 24 hours on an M12 XC4.0 battery, and has a pivoting head and a strong rear magnet for car hoods, panels, and ducts. An integrated keyhole hangs it where there is no steel, the rubber overmold works as a handheld inspection grip, and a 2.1 A USB port charges a phone from the same battery. It is IP54 rated for dust and water and survives drops up to 9 ft.
Both tools run on the Milwaukee M12 platform, so the two included batteries and the charger power the light, the sander, and any other M12 tools you already own.
Who should buy it? Collision and paint technicians, restoration shops, and anyone who sands finishes on vertical panels where a lightweight 12V sander beats a heavier tool. If you already have M12 batteries, the bare Milwaukee 2584-20 sander is the lower-cost route. If you are starting fresh, this kit gives you two batteries, a charger, and a work light in one box.
Everything for the Panel in One Box
The sander, the light, two batteries, and the charger all share one M12 platform, so you are ready to sand and see the work the day it arrives.
- M12 REDLITHIUM HIGH OUTPUT CP2.5 and XC5.0 batteries
- Soft hook-and-loop and soft PSA 6" backing pads
What's in the Box
- (1) Milwaukee M12 FUEL 6" Random Orbital Sander (3/32")
- (1) Milwaukee M12 ROVER Service and Repair Flood Light with USB Charging
- (1) M12 REDLITHIUM HIGH OUTPUT CP2.5 Battery
- (1) M12 REDLITHIUM HIGH OUTPUT XC5.0 Battery
- (1) M12 Charger
- (1) 6" Hook-and-Loop Backing Pad, Soft
- (1) 6" PSA Backing Pad, Soft
Key Specifications
|
|
12V (M12) |
|---|---|
|
|
6" |
|
|
3/32" |
|
|
3,200-12,000 RPM |
|
|
POWERSTATE brushless |
|
|
(1) CP2.5, (1) XC5.0 |
|
|
700 lumens |
|
|
Up to 24 hours (M12 XC4.0 battery) |
|
|
IP54 |
|
|
2.1 A |
Compatibility
Built For
Pro Tip
Stick the ROVER low on the panel and pivot the head so the light skims across the surface. A low angle shows sanding scratches and dry spots in the clear far better than light pointed straight at the panel.
Warranty & Support
Tool Nut's Take
The Milwaukee 2584-22CX M12 FUEL 6" Random Orbital Sander with ROVER Flood Light Is a Body Shop Starter Kit
A fine-finish cordless sander that holds speed on clear coat, plus the light to see what you are doing, on one battery system.
- Who it's for: Paint and collision techs, restorers, and refinishers who want a light cordless sander for clear coat and primer work.
- Why it stands out: Low-RPM control without pad stall, a tool-free pad change, and a magnetic 700-lumen light in the same kit.
- Worth knowing: The 3/32" orbit is built for finishing, not heavy stock removal. For aggressive cutting, a larger-orbit sander is the better tool.
Common Questions
- What batteries come in the kit? One M12 REDLITHIUM HIGH OUTPUT CP2.5 and one XC5.0, plus an M12 charger.
- How many doors can I sand per charge? Milwaukee rates up to five doors on a single CP2.5 battery.
- Does the flood light need its own battery? It uses any M12 battery, including the two in this kit.
- Can the light charge my phone? Yes. It has a 2.1 A USB output.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

